Internet of Things (Iot) Based Smart Environment and its Applications

In day to day world the internet of things is one of the emerging technologies. Through wired and wireless medium IOT connects various object which helps the human to interact with objects in both digital as well as physical world. Due to increase of population the services are very challenging for the providers. To overcome those challenges the IOT has developed with many applications. IOT contain the sensor which connects to Bluetooth, Wi-Fi, RFID and also it covers wide area with many technologies like GSM, 3G and GPRS. The IOT devices collect many useful information from various devices and flow the data between many devices. 

The flow of information can be done without human'“to-human or human'“to-computer interaction. Due to IOT the world will become smart so it is called as smart home, smart cities, smart building and also some applications. Many sectors are connected to RFID technologies like banking, agriculture, education, domestic appliances monitoring, Surveillances, government '“ e services, government '“ e services, traffic surveillance, meteorology and security and emergency. This devices also consist of heat, light, security system with less cost. 

The online capable devices figure was 31% in 2016. It increased up to 8.4 billion in 2017. The IOT devices will be increased more than 30 billion in the year of 2020. The value of IOT will reach nearly up to $7.1 trillion. In 2019 Enterprise internet of things (EIOT) devices increases up to 9.1 billion. In this paper IOT based smart environment is discussed with its issue. It is used for transport, vehicle parking, waste management, reduce traffic, increase the better communication with road side objects like hospital, school and also with other objects. 

By Devi Kala Rathinam. D | Sherin. J | Santhiya Grace. A"Internet of Things (Iot) Based Smart Environment and its Applications"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-4 , June 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd15709.pdf 

Direct URL: http://www.ijtsrd.com/engineering/computer-engineering/15709/internet-of-things-iot-based-smart-environment-and-its-applications/devi-kala-rathinam-d

peer reviewed journal, manuscript submission, call for paper engineering

Power Conversion Interface

The global environment is degrading and all efforts are being made to reverse the situation. Power generation based on fossil fuel is partly responsible for the polluting emissions. Because of this, renewable (non-pollutant) energy sources have received a lot of attention in the power community. The cost of renewable energies is expected to fall as the demand increases. Power conversion interfaces (PEI) are needed to integrate renewable energy sources with the existing electrical power system. This paper provides a brief introduction on power conversion interfaces. 

By Matthew N. O. Sadiku | Adedamola Omotoso | Sarhan M. Musa | Adebowale E. Shadare"Power Conversion Interface"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-4 , June 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd15710.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/15710/power-conversion-interface/matthew-n-o-sadiku

paper publication, submit paper online, indexed journal

The Comparative Study on Improvement of Tender Systems in Myanmar

The purpose of this paper is to improve the different types of only public tender systems and contract systems in Myanmar. The study is divided into two parts. The first one is comparing the tender systems and the second is comparing the contract systems. Firstly, tender systems of each ministry are studied. When studying the existing practices of tender systems in Myanmar, there are many deficiencies in each ministry and they are unsystematic. To improve the tender system that is different and has defects, tender systems of each ministry are compared. A better and suitable tender system is defined from comparing each ministry. 

Then that better and suitable tender system is compared with American Institute of Architect (AIA). The suitable facts for Myanmar and the key factors or components that should involve are taken into account. And then the improved tender system that is more suitable and perfect gets. Secondly, contract systems of each ministry are studied. The bid phase has defects for making contract after awarding the tender. There are many problems in current existing contract bid because of weakness and difference of bid phase. To solve them, an improved contract system that should include the suitable facts for each contract investigate and constructs for Myanmar. 

By Htun Myint | Htet Thinzar Thein"The Comparative Study on Improvement of Tender Systems in Myanmar"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-4 , June 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd15683.pdf 

Direct URL: http://www.ijtsrd.com/engineering/civil-engineering/15683/the-comparative-study-on-improvement-of-tender-systems-in-myanmar/htun-myint

paper publication, submit paper online, indexed journal

Authentication through Claims-Based Authentication

Thinking as far as claims and issuers is an effective reflection that backs better approaches for securing your application. Claims have an understanding with the issuer and allow the claims of the user to be accepted only if the claims are issued by a trusted issuer. Authentication and authorization is explicit in CBAC as compared to other approaches. [1]. 

By Pawan Patil | Ankit Ayyar | Vaishali Gatty"Authentication through Claims-Based Authentication"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-4 , June 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd15644.pdf 

Direct URL: http://www.ijtsrd.com/engineering/software-engineering/15644/authentication-through-claims-based-authentication/pawan-patil

open access journal of engineering, ugc approved journals for engineering, special issue publication

Implementation of Brain Tumor Extraction Application from MRI Image

Medical image process is that the most difficult and rising field currently now a day. Process of MRI pictures is one amongst the part of this field. This paper describes the projected strategy to find & extraction of tumour from patient's MRI scan pictures of the brain. This technique incorporates with some noise removal functions, segmentation and morphological operations that area unit the fundamental ideas of image process. Detection and extraction of tumor from MRI scan pictures of the brain is finished by victimization MATLAB software package 

By Satish Chandra. B | Smt K. Satyavathi | Dr. Krishnanaik Vankdoth"Implementation of Brain Tumor Extraction Application from MRI Image"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-4 , June 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd15701.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/15701/implementation-of-brain-tumor-extraction-application-from-mri-image/satish-chandra-b

international journals in engineering, paper publication for engineering, conference issue publication

Productivity Improvement in a Sewing Line Through Line Balancing in a Garment Manufacturing Company in the Philippines

In any manufacturing company, productivity in terms of quality and cost required in doing the operation is the topmost priority to be considered. Productivity improvement was studied through the use of time and motion study and line balancing concept in one of the clusters of a sewing line in a garment manufacturing company. Series of observations in the line and direct interviews among the regular personnel involved in the operation were done including the sewers, pressers, and supervisors in charge of the assembly line.

It was noted that the average productivity rate of the selected assembly line was only seventy-one (71) percent way down below from their target output. Based on the findings of the study, plant layout was one of the contributing factors that causes bottleneck in the assembly line particularly in the pairing and aligning of cut goods.

Task time involved in each process was studied and computed based on optimal number of manpower and expected productivity rate. In effect, combining the processes of pairing and aligning of cut goods in one line contributes great impact in reduction of machine requirements per process to improve the productivity rate of the company.

By Amaya, Flocerfida L | Delos Santos, Rafael, A | Tenorio, Rodolfo Jr. V"Productivity Improvement in a Sewing Line Through Line Balancing in a Garment Manufacturing Company in the Philippines"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-4 , June 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd15666.pdf 

Direct URL: http://www.ijtsrd.com/engineering/industrial-engineering/15666/productivity-improvement-in-a-sewing-line-through-line-balancing-in-a-garment-manufacturing-company-in-the-philippines/amaya-flocerfida-l

international journals in engineering, paper publication for engineering, conference issue publication

Predefined Height Measurement of the Slab in Plate Mill

In the past 20 years, we can see various changes in the rate of production in industries. This has been achieved with the help of advanced technologies which leads to the growth of industries. The challenging problem of height measurement of the slab in plate mill as well as in rail mill is an active field of research in automation. The reheating furnace and the rolling mill can be considered as two main process in a plate mill. Reheating is thermal process while rolling is mechanical process. 

Reheating furnace is used for heating iron blocks, which is the raw material for the plate mill and the rolling mill is used for turning the steel block to the plate by making it wider, thinner and longer .The main feature of interest in the operation of furnace is the production capacity, measurement of the dimension of the block and display it to the seven segment display board using microcontroller. 

The production capacity of plate mill affects by the operation of the process and to obtain proper production, dimension should be accurate .That's why before entering of bloom between the rollers, there will be a display system which will give the exact dimension of the block. 

By Monika Kulshrestha | Jaya Misra"Predefined Height Measurement of the Slab in Plate Mill"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-4 , June 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd15685.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/15685/predefined-height-measurement-of-the-slab-in-plate-mill/monika-kulshrestha

peer reviewed journals, manuscript submission, call for paper engineering