Wednesday, August 4, 2021

Effectual P and O Perturb and Observe Algorithm Based MPPT Control for Islanded Micro Grid

According to scientific research a big concern for mankind that the atmospheric change caused by the utilization or the consumption of fossil fuels provides us a great opportunity to make the renewable energy concept one of the interesting research areas. The higher authorities of all the countries or nations encourage the society through a proper way likewise seminars, conferences, printed media, etc to utilize the renewable energy resources in a predetermined manner. Global warming also is a big concern for our mankind, we need to step up as early as possible in order to utilize natural resources so that we can get more and more benefits, but care must be taken in order to preserve our atmosphere. It has been found that renewable energy has recorded the most significant development around the globe. According to the survey report, about 24 of the world’s electricity is produced by Renewable Energy resources, this implies that about ¼ th part of electricity is generated from REs’s whereas 76 of latest renewable installation goes in favor of photovoltaic PV and wind turbine WT systems. Efforts are being made towards research on hybrid renewable resources that are used for purpose of microgrids. Renewable based microgrids DC proposes a characteristic feature of utilizing natural resources with the help of energy management techniques. Stringent control is needed for hybrid type microgrids such as wind and PV based for harnessing maximum available energy, energy storage system like batteries demands efficient management and the DC bus voltage should remain constant. These above based requirements are fulfilled by the MPPT control algorithm in our project, so it provides intelligence to the system and makes the microgrids reliable. 

by Wasim Yousuf Wani | Dr. Mohd Ilyas "Effectual P and O (Perturb and Observe Algorithm) Based MPPT Control for Islanded Micro Grid" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd43802.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/43802/effectual-p-and-o-perturb-and-observe-algorithm-based-mppt-control-for-islanded-micro-grid/wasim-yousuf-wani


callforpaperpapersconference, highimpactfactor, manuscriptpublication 

Design and Development of Catalytic Converter for Reduction of Pollution by Using Transient and CFD Analysis

The use of fossil fuels in automobiles mainly HC, CO and NOX which produce harmful green house gases. The main objective of catalytic converter is to reduce and control effect of harmful pollutants by converting toxic CO and NOX to non toxic CO2and H2O. CFD analysis is done in the present study of catalytic converter by taking three different materials for the make of catalytic converter such as stainless steel, Grey cast iron and aluminum at the time by varying different fluids such as methane, ethane and nitrogen at varying speeds of 2000 and2500R.P.M. 

by V. Saran Tej | M. Rakesh Kumar | N. Satya Sandeep | N. Sai "Design and Development of Catalytic Converter for Reduction of Pollution by Using Transient and CFD Analysis" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd43784.pdf 

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/43784/design-and-development-of-catalytic-converter-for-reduction-of-pollution-by-using-transient-and-cfd-analysis/v-saran-tej


callforpapersocialscience, ugcapprovedjournalsforsocialscience, socialsciencejournal

Tuesday, August 3, 2021

Dressing and Economic in the Cultivation of Tomatoes in Greenhouses Simple and Kidroponics Method Efficiency

in the article, the period of ripening of the tomato crop grown by irrigation methods in the experimental area, the average of 4,5 kg m2 in the simple greenhouse variant, in which the method of irrigation was applied during the season, the yield of 14,5 kg m2 in tomatoes grown with the support of the method of hydroponics, the yield of 510 million soums, 6360 soums kg, the profitability rate was 57 . 


by Jurayev U. A. | Atamurodov B. N. | Ibodov I. N. | Najmiddinov M. M. | Najimov D. Q. "Dressing and Economic in the Cultivation of Tomatoes in Greenhouses Simple and Kidroponics Method Efficiency" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-4 , June 2021, 

URL: https://www.ijtsrd.compapers/ijtsrd43633.pdf 

Paper URL: https://www.ijtsrd.comengineering/agricultural-engineering/43633/dressing-and-economic-in-the-cultivation-of-tomatoes-in-greenhouses-simple-and-kidroponics-method-efficiency/jurayev-u-a

callforpaperbiologicalscience, biologicalsciencejournal

Design of Earthing in Underground Substation using ETAP with Constraints

This paper describes the earthing design of a distribution substation 33kV 415V, 50Hz system. in this type of substation equipment’s are 33kV HV panel, transformer, battery, battery charger and Low voltage panels. The earth mat is below substation which is almost 15 18 Meter deep from ground level. The main considerable factors for earth mat design are soil resistivity which is higher due to basalt rock and system fault current. Fault current level of the system considered as 70kA derived from calculations. Earthing is essential for proper functioning of substation equipment’s and in the absence of proper designing affects in many ways like electric shock to personnel’s and malfunctions and damage to the equipment’s. The basic purpose of earthing is to ensure personnel safety, safe and reliable operation of equipment’s, prevent stray current, protection against interferences and keeps steps and touch potential within safe limit. This paper also discussed constraint in design due to below ground level. Result of manual calculation compared with design simulated through ETAP software version 19. The data used in design considered from a substation in Mumbai, Maharashtra. 

by Daud Ahmad | Dr. Javed Ashraf "Design of Earthing in Underground Substation using ETAP with Constraints" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, 



Monitoring and Evaluating the Contribution of the Rural Development in India and Master Plan for Development of MULHER Village

The rural development generally refers to the process of improving guarantee of life and economic welfare of people living in relatively isolated and sparsely polluted in India, out of total population of 131 crores, 83.3 crores live in rural area. Thus, nearly 70 percent of the India’s population lives in rural, these populations can be characterized by mass Poverty, high level of unemployment, low level of literacy and income, high of unemployment and poor nutrition and health status. In order to tackle these specific problems a number of rural development programs are being implemented to create opportunities for improvement of the quality of life of these rural people. In this paper, various rural development schemes, policies and programs proposed by government are discussed in detail. An ideal master plan of MULHER village is also developed further to show the shadow of ideal village. Most poor people live in rural areas of developing countries and are dependent on agriculture for their livelihood. The pressure such as population growth, modernization, ethnic conflicts and environmental degradation are factors that are forcing local inhabitants to change their way of life. Under such circumstances we try to give a solution of various problems of rural peoples. 

by Prof. Sachin L. Desale | Prachi S. Awatade | Rutuja S. More | Krishna V. Patil | Bhushan R. Saindane "Monitoring and Evaluating the Contribution of the Rural Development in India and Master Plan for Development of MULHER Village" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd43714.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/43714/monitoring-and-evaluating-the-contribution-of-the-rural-development-in-india-and-master-plan-for-development-of-mulher-village/prof-sachin-l-desale


callforpapercommerce, ugcapprovedjournalsincommerce, commercejournal

Study on Behavior of Outrigger System on High Rise Structure by Varying Outrigger Depth in Seismic Zones of India by Using Staadpro

These Tall building development is rapidly growing almost everywhere in the world acquainting new difficulties that need to be met with, through engineering evaluation. In tall buildings, lateral loads generated by earthquake or wind load are frequently resisted by providing coupled shear walls. But as the height increases, the building becomes taller and the efficiency of the tall building greatly depends on lateral stiffness and resistance capacity. So, a system called outrigger is introduced which improves overturning stiffness and strength by connecting shear wall core to outer columns. When the Structure is subjected to Lateral forces, the Outrigger and the columns resist the rotation of the core and thus significantly reduce the lateral deflection and base moment, which would have arisen in a free core. During the last three decades, numerous studies have been carried out on the analysis and behavior of outrigger structures. But this question is remained that how many outriggers system is needed in tall buildings. Using Staad Pro 

by Mayuri N. Ade | Prof. G. D Dhawale | Prof. M. M. Lohe "Study on Behavior of Outrigger System on High Rise Structure by Varying Outrigger Depth in Seismic Zones of India by Using Staadpro" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd43789.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/43789/study-on-behavior-of-outrigger-system-on-high-rise-structure-by-varying-outrigger-depth-in-seismic-zones-of-india-by-using-staadpro/mayuri-n-ade


callforpaperphysics, physicsjournal

Monday, August 2, 2021

Application of Scale, Projection and Lettering in Architectural Design

Design consists of ideas and combinations of techniques, elements of design and the use of ideal spatial creation. Balance and Positive combinations of form and functions has to follow certain principles of design and drafting. Design can be successful only when rules for scaling, proportion, light, colour, form and other elements are used tactfully with concepts and proposals. Scale, Projection are the tools which bring into reality the idea created in mind and comes into form when projected according the linear, angular and radial projection rule applied. This paper signifies the role of scale used in drawing various parts, the projections needed to detail out the arts and lettering to make it understandable for the viewer. We discuss here about scale, the need for scale, geometric construction to form the spaces, projections on horizontal and vertical planes defining the whole element. 

by Dr. Mukesh Kumar Lalji | Ar. Neeta Mohgaonkar | Dr. Sheetal Sharma "Application of Scale, Projection and Lettering in Architectural Design" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-4 , June 2021, 

URL: https://www.ijtsrd.compapers/ijtsrd42474.pdf 

Paper URL: https://www.ijtsrd.comengineering/architecture-and-planning/42474/application-of-scale-projection-and-lettering-in-architectural-design/dr-mukesh-kumar-lalji

internationaljournalsofcomputerscience, callforpapercomputerscience, ugcapprovedjournalsforcomputerscience