Analytical Study of Natural Light and Ventilation in Admistrative Building of PCNTDA, Pune Region

As one of the significant parts in the building design, use of natural light and ventilation which reflects one important factor of energy conservation to some extent. To ensure that decreasing use of energy resources to the maximum extent in constructions and make buildings harmonize with their surroundings, which has become important pursuing for inhabited building, at present, integrated design is to highlight natural ventilation and natural light use as main component of building design. Urban areas continuously pollute the air in cities which affects the human health and the environment sustainability. This work analyses the provisions done in the Administrative Building for Pimpri Chinchwad New Town Development Authority PCNTDA for utilizing natural light and natural ventilation to make the occupants and users much more comfort as compare to conventional building which are not taking care of natural light and ventilation phenomenon. The provision made in the building and saving due to provisions is calculated in this research work. Komal Patil | Dr. L. S. Pammar "Analytical Study of Natural Light and Ventilation in Admistrative Building of PCNTDA, Pune Region" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, 

URL: https://www.ijtsrd.com/papers/ijtsrd23949.pdf

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/23949/analytical-study-of-natural-light-and-ventilation-in-admistrative-building-of-pcntda-pune-region/komal-patil

peer reviewed journal, paper publication for student, research publication

Design Selection of Transformer on Based Load Capacities for Industrial Zone

This paper focus on one industrial zone as model of base loads consideration in where many loads power consumption are applied many kinds of transformers and specifications. That will involve the correct design selection for location of transformers and their accessories that are considered inductive loads and capacitive loads are affective active and reactive loads which are depended on their operation of each division. Load design will be important whether to reduce loss or stability of power factor while operation in running time. Load acres, load sizes and load stabilities are selected with many effectives beyond transformers are settlement in each acre. The expected operating characteristics should not be determined at the necessary protection provided. 

BY Aye Myo Thant "Design Selection of Transformer on Based Load Capacities for Industrial Zone"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23983.pdf

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/23983/design-selection-of-transformer-on-based-load-capacities-for-industrial-zone/aye-myo-thant

paper publication, peer reviewed journal, paper publication for student

Implementation of a Microcontroller Based Wireless Control of Domestic Electrical Appliances using the GSM Network

In this paper, the automatic control of domestic electrical appliances using a wireless network is presented. The wireless network of choice is the Global system for mobile communication, GSM. This paper presents a methodology that the communication can be extended even to inanimate devices like domestic electrical appliances such as radio, refrigerator, TV, light bulbs etc. the methodology entails the use of the feature of the GSM phone known as dual tone multi frequency DTMF. This DTMF tones are automatically generated when the buttons of a mobile phone is pressed. A DTMF to binary converter integrated circuit was used to convert the DTMF tones into binary format which is fed into the I O ports of an 8052 microcontroller. A resident program enables the DTMF codes that are received to be used to control electrical appliances. The system also has a unique feature that after an action is performed it sends back an audio tone to inform the user about the success or failure of the execution of the command. 

BYS. O. N. Okonye | V. E Enukpere "Implementation of a Microcontroller Based Wireless Control of Domestic Electrical Appliances using the GSM Network"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23973.pdf

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23973/implementation-of-a-microcontroller-based-wireless-control-of-domestic-electrical-appliances-using-the-gsm-network/s-o-n-okonye

open access journal of science, open access journal of engineering, open access journal of management

Comparative Analysis of Green Algorithm within Active Queue Management for Mobile Ad Hoc Network

The Queue Management Techniques play an important role in improving the Quality of Service in Mobile Ad hoc Networks. The need of congestion control and Queue management is inevitable in Mobile Ad hoc Network. Understanding and analyzing the latest AQM Techniques give an insight to improving throughput, packet loss rate, average end to end delay and other parameters that severely affect the performance. The performance of mobile ad hoc networks is evaluated by varying the Channel Error Rate, Bandwidth and Delay at different fragment sizes of different traffic flows. The proposed method performs the network analysis of new Routing protocols. The work proposes to evaluate various Active Queue Management Techniques in a multi traffic environment i.e., sources generating both TCP and UDP traffic classes. The UDP is propagated via CBR and TCP is propagated via FTP. The implementation of the proposed queue management technique has been done in NS 2. In the proposed work we have make NS 2 compatible with GREEN by integrating source code into the ns 2 installation files and using various AQMs in comparison with GREEN to calculate the throughput at various Bandwidths across network. Using various AQMs in comparison with GREEN we have calculated the throughput at various Delays across the network and we have also calculated the throughput at various channels Error Rate across the network. The proposed method has been compared with other primitive AQM techniques so that a repository of best available results can be obtained for design and research purposes. The proposed method has outperformed the existing queue management techniques in number of scenarios. 

BY Zulai Khan | Rashmi Raj "Comparative Analysis of Green Algorithm within Active Queue Management for Mobile Ad Hoc Network"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23950.pdf

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23950/comparative-analysis-of-green-algorithm-within-active-queue-management-for-mobile-ad-hoc-network/zulai-khan

open access journal of management, indexed journal, paper publication

Remote Sensing and GIS Methods in Urban Disaster Monitoring and Management"“ An Overview

Disasters, whether natural or man induced have increased during the last decades in frequency all over the globe threatening a huge population within varied backgrounds. Over the years, remote sensing technologies have been functional in various disasters such as droughts, earthquakes, tsunamis, cyclones, etc. Its large area coverage capacity and observation repeatability makes its application cost effective. This paper tries to give the fundamental contributions and role of geographic information systems and remote sensing in disaster management applications. As an overview, it examines some recent practical application in disaster events. It also tries to look at some measurement characteristics and systems that have been applied to some disaster events within the disaster management framework and technologies. These various techniques and roles of remote sensing and geographic information systems in urban disaster monitoring and controlling, extends to disaster risk management using some sensors and satellites of emerging technologies. This discussion summarises in a single paper some of the many current techniques remote sensing and GIS employ in urban disaster management. Lessons from events can be drawn and implemented in similar scenarios to save lives and property. 

BY Nana Yaw Danquah Twumasi | Zhenfeng Shao | Altan Orhan "Remote Sensing and GIS Methods in Urban Disaster Monitoring and Management "“ An Overview"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23976.pdf

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/23976/remote-sensing-and-gis-methods-in-urban-disaster-monitoring-and-management-–-an-overview/nana-yaw-danquah-twumasi

open access journal of engineering, open access journal of management, indexed journal

Design and Implementation of a Programmable Bluetooth Electric Cooker

This work focus on design and implementation of a programmable Bluetooth electric cooker. In recent times technology has been helping to improve the way we live and carry out our everyday activities. This includes the way in which we cook and prepare our foods. This improvement has been accompanied by structural developments in the use of technology characterized by the emergence of such communication protocols such as Bluetooth. This system uses an android phone with a Bluetooth device to communicate with a microcontroller which has been programmed embedded in an electric cooker. The system was tested and satisfactory results were obtained. 

BY S. O. N. Okonye | V. E Enukpere "Design and Implementation of a Programmable Bluetooth Electric Cooker"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23972.pdf

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23972/design-and-implementation-of-a-programmable-bluetooth-electric-cooker/s-o-n-okonye

open access journal of chemistry, open access journal of science, open access journal of engineering

Train Mounting T Box for Wind Power Generation

Today many industries are rapidly growing to the wind energy generation. Nowadays, the need of energy resources is increasing at a much faster rate. We need to capitalize all the available options to complete all our needs with ease. For this, inventions such as T BOX are very helpful. As it needs only wind from passing trains to produce the energy. Since fasting is going on for alternative forms of treatment, T box has created hope. This device introduces a new generation of wind energy generator producing very prominent in techno buffs. That's it however, it is important to remember, that the design is still in a conceptual state, so that in the future, the 'use and maintenance of this device has not been resolved. Our evolution shows that i Constructing electricity Using the concept of rotation of wind turbine by hawking rail. ii Using air tight coat to reduce large pressure and use it to control wind flow. The mouth of casing provided with valve to control the wind flow. To provide full mechanical support to the Train. 

BY Vaghela P. M | Thorat P. D | Lakudzode K. B | Prof. Udamle S. R "Train Mounting T-Box for Wind Power Generation"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23933.pdf

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/23933/train-mounting-t-box-for-wind-power-generation/vaghela-p-m

open access journal, open access journal of chemistry, open access journal of science

A Review on Traffic Signal Identification

With the development of the urbanization, industrialization and populace, there has been a huge development in the rush hour gridlock. With development in the rush hour gridlock, there got a heap of issues with it as well, these issues incorporate congested roads, mishaps and movement govern infringement at the overwhelming activity signals. This thusly adversy affects the economy of the nation and in addition the loss of lives. Thus, Speed control is in the need of great importance because of the expanded rate of mishaps announced in our everyday life. The criminal traffic offense expanded due to over movement on streets. The reason is rapid of vehicles. The speed of the vehicles is past the normal speed confine is called speed infringement. In this paper diverse issues are confronted that are given in issue detailing. Every one of these issues are in future with the assistance of the fortification learning issue and advancement issue the changed neural system is contemplated with NN calculations forward Chaining back spread . 

BY Omesh Goyal | Chamkour Singh "A Review on Traffic Signal Identification"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23557.pdf

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/23557/a-review-on-traffic-signal-identification/omesh-goyal

social science journal, open access journal, open access journal of chemistry

A Review on Stegnography Data Hiding using Color Images

Nowadays, network has necessary roles for transferring knowledge accurately and quick from supply to a destination. The info isnt secure enough to transfer extremely confidential. The protection of data has become one in every of the principle challenges of resource sharing with electronic communication over network. Cryptography and Steganography square measure to strategies for shielding knowledge from intruders whereas transferring over an open channel network. Cryptography could be a technique to cipher knowledge and steganography is that the art and science of concealing secret message in an exceedingly cowl image. The digitally shared knowledge between the users ought to be born again to some unclear format which cannot be tampered by the intruders. To fulfill these necessities the technique Steganography will be used. During this technique we tend to use completely different mediums to cover the info that square measure text, images, audio, video etc. this paper is that specialize in encrypting of knowledge by exploitation image steganography. 

BY Gagandeep Singla | Chamkour Singh "A Review on Stegnography Data Hiding using Color Images"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23556.pdf

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/23556/a-review-on-stegnography-data-hiding-using-color-images/gagandeep-singla

languages journal, social science journal, open access journal

Security Issues and the Energy Consumption in the Optical Burst Switched Networks

Optical burst switching is an optical network technology that helps in improving the use of the optical networks resources. In OCS, the network is configured to establish a circuit, from an entry to an exit node, by adjusting the optical cross connects circuits in the core routers in a manner that the data signal, in an optical form, can travel in an all optical manner from source to destination node. This approach suffers from all the disadvantages known to circuit switching the circuits require time to set up and to destroy, and while the circuit is established, the resources will not be efficiently used to the unpredictable nature of network traffic. Security is one of the major problems in field of networks. Mainly this work focused on security issues in optical burst switching and to decreased the energy consumption. In this research work, a secure public key cryptography technique is proposed and evaluated as a security solution to measure security threats related to burst packet in optical burst switching networks. 

BY Palak Kesar | Mandeep Kaur Sandhu "Security Issues and the Energy Consumption in the Optical Burst Switched Networks"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23934.pdf

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23934/security-issues-and-the-energy-consumption-in-the-optical-burst-switched-networks/palak-kesar

life sciences journal, languages journal, social science journal

Design and Construction of Line Following Robot using Arduino

Line following robot is an autonomous vehicle which detect black line to move over the white surface or bright surface. In this paper, the line following robot is constructed by using Arduino nano microcontroller as a main component and consists of three infrared IR sensors, four simple DC motors, four wheels and a PCB frame of robot chassis. The infrared sensors are used to sense the black line on white surface. When the infrared signal falls on the white surface, it gets reflected and it falls on the black surface, it is not reflected. In this system, four simple DC motors attached with four wheels are used to move the robot cars direction that is left, right and forward. The Arduino nano is used as a controller to control the speed of DC motors from the L2953D driver circuit.

BY Khin Khin Saw | Lae Yin Mon "Design and Construction of Line Following Robot using Arduino"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23977.pdf

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23977/design-and-construction-of-line-following-robot-using-arduino/khin-khin-saw

indexed journal, paper publication, peer reviewed journal

Utilization of Plastic waste for Making Plastic Bricks

The plastic waste is the hazardous problem in today's world. This is most dangerous problem in front of humanity. The most hazardous type of wastes are HDPE and PTE and the plastic below 50micron is also causing a serious problem. These plastic mixed in the soil, it directly effects on fertility of the soil. Nowadays, the large amount of plastic is deposited into sea. This plastic wastes gives hazardous effect on the aquatic life and quality of seawater also polluted by this plastic. So, we try to finding efficient way to solve this problem of plastic waste. So, we added this plastic wastes into the bricks and create the bricks by using plastic wastes. It is most economical solution present in the construction industry and it is also economical and environment friendly solution of the plastic wastes. 

BY R. S. Kognole | Kiran Shipkule | Kiran Shipkule | Manish Patil | Lokesh Patil | Udaysinh Survase "Utilization of Plastic waste for Making Plastic Bricks"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23938.pdf

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/23938/utilization-of-plastic-waste-for-making-plastic-bricks/r-s-kognole

medical science journal, life sciences journal, languages journal

Improving Properties of Concrete Replacing Cement and Natural Sand with Metakolin and Robo Sand

Concrete is the most extensively used construction material in the world, which consumes natural resources like lime, aggregates and water. The worldwide production of cement has greatly increased, due to this production environmental pollution increases with emission of CO2 gas. To reduce this effect cement was replaced by some supplementary materials like Metakaolin, Fly ash, Bottom Ash, Ground Granulated Blast Furnace Slag GGBS and Rice Husk etc.. In this content Metakaolin was a pozzolanic material used in wide range in replacement of cement. Metakaolin is dehydroxylated aluminum silicate, due to its pozzolanic activity the strength properties and durability properties of concrete increases and reduction in Porosity and Permeability also. Now a day's availability of natural sand is constraint, so alternative material called ROBO Sand having similar properties as that Natural Sand is used in place of Natural sand to study the fresh and hardened properties of concrete. In this present investigation cement is replaced partially with metakaolin in varying percentage i.e. 0 , 6 , 12 , 18 and 24 and natural sand with 45 ROBO sand to get the different concrete mixes. The fresh and mechanical properties of concrete i.e. workability slump test and compressive strength, split tensile strength and flexural strength at 7 days, 28 days and 56 days are studied of the different concrete mixes and results are compared with conventional concrete. 

BY Jyoti Rani | Shashi Sharma | Vikram Dhillon "Improving Properties of Concrete Replacing Cement and Natural Sand with Metakolin and Robo Sand"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23944.pdf

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/23944/improving-properties-of-concrete-replacing-cement-and-natural-sand-with-metakolin-and-robo-sand/jyoti-rani

arts journal, medical science journal, life sciences journal

QR Code Based Secure Billing System for Shops using Cued Click Points

In today's Mall shopping system, the users usually visit the mall for shopping di erent products and spend their valuable time in searching the products and the products in their price range. After selecting the product the users have to wait in a long queue for billing which is another time consuming part of shopping, and moving the cart from one place to another place is another hectic task. In this system the user's time and searching for products in the entire mall increases. So, we are working on this system to avoid these drawbacks. The drawbacks in the existing system are, rstly the time required for bill payment is more as the users have to wait in a long queue. Secondly, the users have to move the cart through the entire mall and carry a load of products at their home. One more drawback is regarding the barcode in which less data is stored. In view of the mobile phone has become popular consumer products, a simple optimization method was given to design shopping guide systems run on smartphones, with the help of QR code generation and recognition technology, wherein, we can store more data using the QR code. The proposed programs can show accurate and real time shopping destination, thus help shopping mall to mine customer data more accurately and scienti cally. In our system we are going to use QR code for every product using QR code generator, a user goes for shopping and wants to purchase a product, he will scan the QR code of the product using QR code scanner, from his Android device and he will get list of all the similar products in that range and any o ers and discounts related to that product, this is done using searching and sorting algorithms. Once the user scans and adds the product to the cart the data gets fed to the server and the bill gets generated after adding all the products to the cart. The bill is sent to the user on his device and the products are delivered home and also bill payment is done online. Nowadays it is di cult to deal with the text based password. As text can be easily detected, or if it is known then its risky to deal with such things when we have con dential systems with us. We can overcome this problem with the help of a graphical password with cued click points. This graphical password will be really helpful to secure the con dential systems. Cued click points are the concept in which Persuasive Cued Click points graphical password scheme which includes usability as well as security evaluations. There are a lot of e ects that are most well known about passwords such as that user cannot memorize complicated passwords which are simple to identify. 

BY Mr. Vikas Nandgaonkar | Nikita Dongre | Priyanka Giri | Diksha Hinge | Ankita Kashid "QR Code Based Secure Billing System for Shops using Cued Click Points"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23946.pdf

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/23946/qr-code-based-secure-billing-system-for-shops-using-cued-click-points/mr-vikas-nandgaonkar

commerce journal, arts journal, medical science journal

Face Recognition Based Attendance System with Auto Alert to Guardian using Call and SMS

Now a days the wise attending management system victimization face detection techniques. Daily attending marking could also be a typical and vital activity in colleges and colleges for checking the performance of students. Manual attending maintaining is tough methodology, significantly for large cluster of students. Some machine driven systems developed to x beat these difficulties, have drawbacks like worth, faux attending, accuracy, meddlesomeness. To beat these drawbacks, there is need of good and automatic attending system. We've a bent to unit implementing attending system victimization face recognition. Since face is exclusive identity of person, the problem of pretend attending and proxies could also be resolved. The system uses native binary pattern face recognition technique because it is fast, straightforward and has larger success rate. Also, its pro vision to have an effect on intensity of sunshine draw back and head produce draw back that produces it effective. This wise system could also be degree effective because of maintain the degree will less squat recognition system is planned supported appearance based choices that concentrate on the shortened squatter image rather than native countenance. The remainder step in squatter recognition system is squatter detection Viola Jones squatter detection methodology that capable of method photos terribly whereas achieving higher detection rates is utilized. The complete squatter recognition methodology could also be divided into a pair of parts squatter detection and squatter identification. For face detection, Viola Jones face detection methodology has been used out of the many face detection ways that. Once face detection, face is cropped from the actual image to urge obviate the background. Chemist faces and shear faces ways that are used for face identification. Average photos of subjects area unit used as coaching job set to spice up the accuracy of identification.

BY Diksha Ghare | Prajakta Katakdhod | Shraddha Ujgare | Komal Suskar | Prof. Amruta Surana "Face Recognition Based Attendance System with Auto Alert to Guardian using Call and SMS"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23928.pdf

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/23928/face-recognition-based-attendance-system-with-auto-alert-to-guardian-using-call-and-sms/diksha-ghare

chemistry journal, management journal, commerce journal

Experimental Analysis and Effect of Coating on HSS Cutting Tool

In this paper the wear behavior of High Speed Steel HSS Single Point Cutting tool and Titanium Nitride TiN , Aluminium chromium nitride AlCrN coated by physical vapor deposition method PVD , HSS single point cutting tools in dry condition of simple turning process is investigated and compared with respect to its chip tool Interface temperature, turning time, upcoming forces, on each tool is studied and analyzed. The present work involves the study of tool wear caused by the change in hardness of single point cutting tool for a turning operation to predict the tool life in turning process based on temperature and force, stress analysis using Ansys workbench 14.0. Experiments were performed with M.S bar as work piece and HSS coated, uncoated tool bits as a tool material and the single point wear of tool has been measured experimentally. 

BY Ankush Bhalekar | Prof. Ajay N. Ingale | Prof. R. A. Lekurwale "Experimental Analysis and Effect of Coating on HSS Cutting Tool" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23923.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23923/experimental-analysis-and-effect-of-coating-on-hss-cutting-tool/ankush-bhalekar

management journal, commerce journal, arts journal

Design for Harvesting and Treatment of Rainwater in Naval, Biliran

The study takes advantage of rainwater, a naturally processed water. Developing a design for an affordable, less chemically oriented method that would help many people gain access to the water they need easily. The design used materials that w

ere cheap and can be easily accessed on the local market. The process starts from a stage where large particles of contaminants were removed through straining. The next was iltering the water through a sequence of sponge, charcoal, coarse and fine sand. And lastly was chlorination, which treated the rainwater from the bacteria's which were previously not removed from the filter. The study came up with the design that were easily availed on the local markets of Naval, Biliran. The components were easy to install and were effective in harvesting rainwater. The treatment results were not what the researchers envisioned it to be, but still they were able to produce safe drinking water. Sure enough, it could be an alternative for other uses aside from drinking. The design was incomplete, especially on the part of the treatment device thus, further studies are recommended for its improvement. Nevertheless, the study proved that simple customized rainwater harvester and treatment device is achievable with the materials that can easily be found on the local market.

BY  Ramon L. Pitao, Jr. | Dahlia D. Fernandez | Ric Cyrell Rosialda "Design for Harvesting and Treatment of Rainwater in Naval, Biliran"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23897.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23897/design-for-harvesting-and-treatment-of-rainwater-in-naval-biliran/ramon-l-pitao-jr

physics journal, chemistry journal, management journal

Implementation of Recommendation on Location Based Services

Today mobile is very useful thing. It is a need of everybody. In every Era "Location" is a strong component of "Mobility" Location based services LBS are services offered using mobile phone by taking mobile's geographical location. The proposed system is providing location based services and offers with respect to user interest. Vendors are allowed to post and edit an advertisement for users. The system contains various modules such as advertising , Tourist place, Parking place etc. It also provides user's feedback, ranking based suggestion in secured manner. The purpose of this system is to notify the user based on their preferences and their interest in the particular area and notify them using android application. This will lead to lower advertising costs and expenditures also save the time of user for finding the located area of ads with help of GPS.

BY  Sagar B. Gite | Harshada A. Gavali | Ajinkya S. Dhongade | Jyotsna G. Gavatade "Implementation of Recommendation on Location Based Services"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23900.pdf

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/23900/implementation-of-recommendation-on-location-based-services/sagar-b-gite

mathematics journal, physics journal, chemistry journal

Production and Characterization of Biodiesel Fuel Derived from Neem Azadirachta Indica Seed using Two Cylinder Diesel Engine Model

As the decreasing availability of the fossil fuel is rising day by day, the search for alternate fuel that can be used as a substitute to the conventional fuels is rising rapidly. A new type of biofuel, Neem oil biodiesel, is introduced in this work for the purpose of fuelling diesel engine. Neem oil was extracted from neem seed by solvent extraction method and biodiesel was produced by transesterification method. The percentage yield of Neem oil and biodiesel were found to be 40 and 75 respectively. The properties were simulated in a model produced using GT power suite. The engine speed was varied and engine performance such as brake power, brake specific fuel consumption, brake mean effective pressure and the emission of biodiesel and petroleum diesel at various speed were determined and compared. The results show the improve performance of biodiesel. The performance characteristics of an engine were studied with biodiesel and petro diesel. The brake power 31.25 kW, brake torque 102.8 N mare found higher at 3600 rpm case 1 and 1200 rpm case 4 respectively. In biodiesel, specific fuel consumption is found more than the petro diesel and the CO and CO2 emission were found lower in biodiesel than petro diesel. The biodiesel have shown better performance than the petro diesel.

BY D. Y. Dasin | I. Yahuza "Production and Characterization of Biodiesel Fuel Derived from Neem (Azadirachta Indica) Seed using Two Cylinder Diesel Engine Model"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23903.pdf

Paper URL: https://www.ijtsrd.com/engineering/automotive-engineering/23903/production-and-characterization-of-biodiesel-fuel-derived-from-neem-azadirachta-indica-seed-using-two-cylinder-diesel-engine-model/d-y-dasin

biological science journal, mathematics journal, physics journal

A Mobile Application for Bus E Ticketing System

In cities, the buses are the nerves of the cities. However, there are many bus operations, which were operated manually. The manual and traditional system takes a lot of time and the tickets cost being of odd amounts and many other different problems while buying tickets. Also in this advance world we are dependent on the paper tickets where the emergence of mobile devices are rapidly increasing among users so here is a solution. In proposed system ticket can be bought with just a smart phone application and, where you can carry your tickets in your smart phone. It uses the smart phones facility to validate and delete your ticket automatically after a specific interval of time. User's ticket information is stored in a database for security purpose which is missing in the present urban system. Also the ticket checker is provided with a mobile based application to search for the user's ticket with the ticket number which is stored in the database for checking purposes. 

BY Vrushali Andhale | Dhanashree More | Aishwarya Nair "A Mobile Application for Bus E-Ticketing System"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23927.pdf

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/23927/a-mobile-application-for-bus-e-ticketing-system/vrushali-andhale

economics journal, biological science journal, mathematics journal

Evaluation of Efficiency and Performances of Building Materials used in Sudan Combined with Lead as the Gamma Ray Shieldings

In this study the linear attenuation coefficient µ and the half value layer HVL of some building materials like iron, concrete, cement and clay used in Sudan as a combined with the lead have been investigated, the results have been experimentally determined using Cs 137 and Co 60 source and compared with the theoretical values. The measurements were performed for radiation intensity without shielding and with specific thickness of selected samples using ion chamber placed at 2 meters from Cs 137 and Co 60. An obtained results showed that the linear attenuation coefficient µ has a linear relationship with the corresponding densities of the samples studied and inversely with photon energy, and the half value layer HVL was proportional directly with photon energy. As a results of this evaluation the lead combined with the selected materials as indicated above showed an improvement the efficiency of building materials as the gamma ray shielding. 

BY M. D. M. Ali | M. E M. Eisa | A. E. El Faki | A. Hamed | A. A. Beineen "Evaluation of Efficiency and Performances of Building Materials used in Sudan Combined with Lead as the Gamma Ray Shieldings"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23924.pdf

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/23924/evaluation-of-efficiency-and-performances-of-building-materials-used-in-sudan-combined-with-lead-as-the-gamma-ray-shieldings/m-d-m-ali

pharmacy journal, computer science journal, economics journal

Electronegativity A Force or Energy

Electronegativity as force or energy leads to new ansatz at critical point in binding or bonding state in between two similar atoms or dissimilar atoms. Electronegativity as a quantum mechanical entity energy or non quantum entity force is yet to be answered. The dual approach to electronegativity has been discussed in this paper. The aim of this paper is to prove that Electronegativity as Hellman Feynman Force is more accurate and absolute. Electronegativity has been computed using the Hartree Fock and Rothan Hrtree Fock energy equations and equivalent electrostatic force equation. 

BY P Ramakrishnan "Electronegativity: A Force or Energy"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23864.pdf

Paper URL: https://www.ijtsrd.com/engineering/chemical-engineering/23864/electronegativity-a-force-or-energy/p-ramakrishnan

ugc approved science journal, ugc approved engineerig journal, journal publications

Determination of Drying Constants of Some Selected Roots and Tubers

In an attempt to easily determine the desired moisture content at any time t , of selected freshly harvested roots and tubers yellow cassava, carrot, cocoyam and yam of economic importance subjected to drying under unsteady temperature conditions such as sun drying, especially in the rural areas where there is no electricity or funds availability to acquire suitable drying equipment by local farmers the drying constants based on established model that is anchored on mass of the material

at any time t was carried out. In this study, three mass classifications, namely small, medium and large were prepared for each material and subjected to oven drying at a given temperature till bone dry mass. The experimental values obtained were computed and graphs plotted to obtain the slopes as drying constants of values 0.3114, 0.1092, 0.3736 and 0.3790 for bulk samples of yellow cassava, carrot, cocoyam and yam respectively. 

BY Orua Antia | Innocent Oboh | William Olosunde "Determination of Drying Constants of Some Selected Roots and Tubers"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23916.pdf

Paper URL: https://www.ijtsrd.com/engineering/food-engineering/23916/determination-of-drying-constants-of-some-selected-roots-and-tubers/orua-antia

technology journal, pharmacy journal, computer science journal

A two Stage Fuzzy Logic Adaptive Traffic Signal Control for an Isolated Intersection Based on Real Data using SUMO Simulator

In this paper, a two stage fuzzy logic system has been proposed to control an isolated intersection adaptively. The aim of this work is to minimize the average waiting time for a different traffic flow rates in real time means. In the first stage, the system consists of two modules named next phase selection module and the green phase extension module. In the second stage the system consists of the decision named module. The study was performed using SUMO traffic simulator. A comparison is made between a fuzzy logic controller and a conventional fixed time controller. As a result, fuzzy logic controller has shown better performance. 

BY Taha Mahmood | Muzamil Eltejani Mohammed Ali | Akif Durdu "A two Stage Fuzzy Logic Adaptive Traffic Signal Control for an Isolated Intersection Based on Real Data using SUMO Simulator"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23873.pdf

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23873/a-two-stage-fuzzy-logic-adaptive-traffic-signal-control-for-an-isolated-intersection-based-on-real-data-using-sumo-simulator/taha-mahmood

ugc approved management journal, ugc approved science journal, ugc approved engineerig journal

Face Recognition Based Intelligent Door Control System

This paper presents the intelligent door control system based on face detection and recognition. This system can avoid the need to control by persons with the use of keys, security cards, password or pattern to open the door. The main objective is to develop a simple and fast recognition system for personal identification and face recognition to provide the security system. Face is a complex multidimensional structure and needs good computing techniques for recognition. The system is composed of two main parts face recognition and automatic door access control. It needs to detect the face before recognizing the face of the person. In face detection step, Viola Jones face detection algorithm is applied to detect the human face. Face recognition is implemented by using the Principal Component Analysis PCA and Neural Network. Image processing toolbox which is in MATLAB 2013a is used for the recognition process in this research. The PIC microcontroller is used to automatic door access control system by programming MikroC language. The door is opened automatically for the known person according to the result of verification in the MATLAB. On the other hand, the door remains closed for the unknown person. 

BY San San Naing | Thiri Oo Kywe | Ni Ni San Hlaing "Face Recognition Based Intelligent Door Control System"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23893.pdf

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/23893/face-recognition-based-intelligent-door-control-system/san-san-naing

ugc approved journals for science, ugc approved journals for social science, ugc approved management journal

Child Rescue System from Open Borewells

In present time, children fall in the Borewell due to the carelessness nature of the people in society. The currently available systems to save the child are less effective and costly too. Thus the society is in need of a new technique which is more efficient and effective. In most cases reported so far, a parallel hole is dug and then horizontal path is made to reach the child. It is not only a time taking process, but also risky in various ways. The borewell rescue system is capable of moving inside the same borewell where the child has been trapped and performs various actions to save the child. CCTV camera is used to continuously monitor the child's condition. This system has a high power LED which acts as a light source since light intensity inside the hole will be less. The advancement in the field of automation along with the mechanical design has a great impact on the society. This project includes series of process development from hand drawn sketches to computer generated design. The modern equipments are implemented for various parts of the system, since the system performs a life rescuing activity. The light weight servomotors are implemented for the system's operations. Borewell rescue System is a human controlled computerized system embedded with additional safety devices. 

BY Nitin Agarwal | Hitesh Singhal | Shobhit Yadav | Shubham Tyagi | Vishaldeep Pathak "Child Rescue System from Open Borewells"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23847.pdf

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23847/child-rescue-system-from-open-borewells/nitin-agarwal

ugc approved journals in mathemetics, ugc approved journals for science, ugc approved journals for social science

Harmonics Reduction and Power Factor Improvement of Switch Mode Power Supply by Using Zeta Converter

This article describes the topology of a DC DC converter operating in switching mode on off . During the completion of the switching cycle, the entire current flow may be resolved and the load may be left. Under these conditions, the initial conventional upconverter switches are heavily loaded and result in large power losses. Switches with boost converters provide low loss, high output voltage, high efficiency, small size, reduced electromagnetic interface EMI , and low voltage components for power supplies. 

BY Prof B. Sampath Kumar | Mr. P. B Vyavahare "Harmonics Reduction and Power Factor Improvement of Switch Mode Power Supply by Using Zeta Converter"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23891.pdf

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/23891/harmonics-reduction-and-power-factor-improvement-of-switch-mode-power-supply-by-using-zeta-converter/prof-b-sampath-kumar

engineering journal, science journal, technology journal

Self Healing Capabilities in Polymeric Materials An Introduction to Techniques

Polymeric materials had shown tremendous increment in its properties due to its acceptability in a wide range of engineering usage. The usage is still restricted due to its reparability and life then after. The life of repaired plastic is less. The present paper study of various type of techniques available, which can develop self healing capabilities in polymeric materials. The main aim is to further concentrate on an idea which gives maximum improvement in engineering properties, life etc. for structural and engineering usage. 

BY Avinash Pratap Singh | Kuldeep Singh | Aman Jain | Arun Kapoor | Ankit Kumar | Abhishek Pandey "Self-Healing Capabilities in Polymeric Materials: An Introduction to Techniques"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23886.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23886/self-healing-capabilities-in-polymeric-materials-an-introduction-to-techniques/avinash-pratap-singh

computer science journal, economics journal, biological science journal

Secure Health Monitoring of Soldiers with Tracking System using IoT A Survey

The paper reports an Internet of Thing IOT based health monitoring and tracking system for soldiers. The proposed system can be mounted on the soldier's body to track their health status and current location using GPS. These information will be transmitted to the control room through IOT. The proposed system comprise of tiny wearable physiological equipment's, sensors, transmission modules. Hence, with the use of the proposed equipment, it is possible to implement a low cost mechanism to protect the valuable human life on the battlefield. It also includes about securing of data of soldiers in the cloud using cryptographic algorithms. 

BY Mrs. Pallavi Kulkarni | Mrs. Tripti Kulkarni "Secure Health Monitoring of Soldiers with Tracking System using IoT: A Survey"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 245
6-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23834.pdf

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23834/secure-health-monitoring-of-soldiers-with-tracking-system-using-iot-a-survey/mrs-pallavi-kulkarni

journal publications, engineering journal, science journal

Automatic Car Theft Detection System Based on GPS and GSM Technology

An efficient automotive security system is implemented for anti theft using an embedded system integrated with Global Positioning System GPS and Global System for Mobile Communication GSM. System presented has Two types of tracking, one is online tracking with GPS system can only receive the vehicle location information from satellites and other is offline tracking. GSM system is installed in the vehicle for sending the information to the owner of the vehicle. The preventive measures like engine ignition cutoff is installed in the vehicle which is controlled using user or owner GSM mobile. The owner can lock or unlock his her vehicle with the help of SMS. The system is implemented on general purpose printed circuit board PCB Using 

BY Arduino. Sandeep Singh | Poonam Kumari "Automatic Car Theft Detection System Based on GPS and GSM Technology"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23867.pdf

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23867/automatic-car-theft-detection-system-based-on-gps-and-gsm-technology/sandeep-singh

ugc approved engineerig journal, journal publications, engineering journal

Spectrum Sharing Analysis of Cognitive System Through Enery Harvesting and Interference Negligence Technique

In this letter, a novel approach for solving the power and spectrum issues in wireless sensor network WSN has been proposed. Typically, a deployed sensor node is programmed to periodically send the data to the central base station CBS . Moreover, most of the sensor nodes are deployed in a hostile environment where replacing a power supply may not be feasible. In the proposed work, we intend to solve the dual problem of spectrum and power for WSN by utilizing techniques such as cooperative spectrum sharing CSS and RF radio frequency energy harvesting, respectively. Specifically, by characterizing the WSN as an energy constrained secondary user, which will harvest power and spectrum from the primary user, we have shown that significant performance gains can be obtained for both primary and secondary users. Closed form expressions for outage prob ability under a Nakagami fading channel have been derived for both primary and secondary users. Furthermore, the theoretical results have been compared with simulation results to validate the proposed analysis. 

BY Gurvinder Singh | Rashmi Raj "Spectrum Sharing Analysis of Cognitive System Through Enery Harvesting and Interference Negligence Technique"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23756.pdf

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23756/spectrum-sharing-analysis-of-cognitive-system-through-enery-harvesting-and-interference-negligence-technique/gurvinder-singh

ugc approved journals for social science, ugc approved management journal, ugc approved science journal

Structural and Vibration Analysis of a Machine Shaft using Finite Element Analysis

The present study is a simulation of a machine shaft. The study will be done on FEM simulation software called Ansys 14.5, where a modal would be developed which will undergo a process of meshing. Meshing will divide the modal in extremely small units without changing the shape of actual geometry which will help the software to study the change at every small unit of the model. Then the of the modal would be defined in terms of inlet and outlet thereafter the boundary condition and design equation would be applied to get the desired result. 

BY Syed Minal Hussian Jafri | Prof Amit Kaimkuriya "Structural and Vibration Analysis of a Machine Shaft using Finite Element Analysis"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23844.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23844/structural-and-vibration-analysis-of-a-machine-shaft-using-finite-element-analysis/syed-minal-hussian-jafri

ugc approved journals in commerce, ugc approved journals in mathemetics, ugc approved journals for science

An Efficient Virtual Memory using Graceful Code

Memory is hardware that is used by computer to load the operating system and run programs. It is buildup of RAM chip that has different memory modules. The amount of main memory in a computer is limited to the amount of RAM that has installed. Generally memory sizes are 256 MB, 512 MB, and 1 GB, because of computer has limited amount of RAM. When too many programs are simultaneously it is possible to run a program out of memory. This is the concept where virtual memory comes. Virtual memory enhance the available memory of a computer has by enlarging the address space or place in memory where data can be stored. Hard disk is used for additional memory allocation .However, since secondary storage is much slower than the RAM, program which is in Virtual Memory must be mapped back to virtual memory in order to be used. The process of mapping data and forth between the hard disc and RAM takes longer than accessing it directly from the memory. It means virtual memory is increased, the more it will slow your computer down. While virtual memory enables your computer to run more than one program it could, otherwise it is the best way to having as main memory as possible. 

BY Divya YA "An Efficient Virtual Memory using Graceful Code"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23878.pdf

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/23878/an-efficient-virtual-memory-using-graceful-code/divya-ya

ugc approved journals for management, ugc approved journals in commerce, ugc approved journals in mathemetics

Steering Control Adaptive Headlight using Sensor

Nowadays, road safety is one of the priority of the government to avoid accidents. Road safety adopts those methods that can prevent road users from being seriously injured or killed. Most of the accidents happened during night time when the driver is unable to see its path clearly especially during blind cuts on roads and on hilly areas. In the conventional headlight's beam of light is focussed only in a single direction that is only in front direction. Our present invention provides a more degree of freedom to the front light which enables these lights to synchronize with the rotation of steering using infrared sensor controlled by microcontroller. 

BY Mayank Bhardwaj | Kunal Giri | Digvijay Rajput | Mohd. Samsh "Steering Control Adaptive Headlight using Sensor"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23872.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23872/steering-control-adaptive-headlight-using-sensor/mayank-bhardwaj

ugc approved journals for computer science, ugc approved journals for management, ugc approved journals in commerce

Phrase Structure Identification and Classification of Sentences using Deep Learning

Phrase structure is the arrangement of words in a specific order based on the constraints of a specified language. This arrangement is based on some phrase structure rules which are according to the productions in context free grammar. The identification of the phrase structure can be done by breaking the specified natural language sentence into its constituents that may be lexical and phrasal categories. These phrase structures can be identified using parsing of the sentences which is nothing but syntactic analysis. The proposed system deals with this problem using Deep Learning strategy. Instead of using Rule Based technique, supervised learning with sequence labelling is done using IOB labelling. This is a sequence classification problem which has been trained and modeled using RNN LSTM. The proposed work has shown a considerable result and can be applied in many applications of NLP. 

BY Hashi Haris | Misha Ravi "Phrase Structure Identification and Classification of Sentences using Deep Learning"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23841.pdf

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/23841/phrase-structure-identification-and-classification-of-sentences-using-deep-learning/hashi-haris

ugc approved journals for engineering, ugc approved journals for chemistry, ugc approved journals for computer science

Communication Skills Improving Assistance

Virtual Reality VR is a computer technology that generates realistic images, sounds and other sensations that simulate a users physical presence in a virtual or imaginary environment. The proposed system nurtures personal traits of an individual which plays a major role in every sector. The system helps to improve an individuals social, personal, and language skills as well as cures phobia of standing in front of audience. With advancement in technology, we are developing a system on Unreal Engine for creation of various environments as well as 3ds Max for creating Virtual Objects which are been placed. The learner is supposed to be in an environment where he she is been judged while appearing for various rounds. Further, video is captured and uploaded on the system and trainers does the evaluation. Trainers are supposed to suggest area of improvement by commenting on the parameters defined. Regular usage of software enhances skills of the user. The proposed system is a VR based verbal non verbal interactive system for enhancing communication skills based on predefined and planned of greeting scenario. Results in each stage are compared and analyzed to get the clear idea of where the person is lacking. The outcome of this practice test leads to improvement in individuals personality, difficulties raised in each environment results in upgradation of selfdom. 

BY Tejas Sayankar | Insiyah Kanchwala | Nikita Mahajan | Sayali Mahajan "Communication Skills Improving Assistance"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23748.pdf

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/23748/communication-skills-improving-assistance/tejas-sayankar

list of ugc approved journals, ugc approved journals for engineering, ugc approved journals for chemistry