Comparative Analysis of Box Culvert with Cushion and Without Cushion Usign Staad Pro

Bridges are essential for the efficient movement of trains and locomotives, as well as for crossing water courses such as streams across embankments as roads are not allowed to obstruct the natural flow of water. Culverts provide balance to the water flow on both sides of the road, as well as protecting and balancing the embankment in order to reduce flooding. Different types of bridges exist, such as arch, slab, and box. Masonry brick, stone, etc. or reinforced cement concrete can be used to build them. The bridges pass through the embankment and are therefore subject to the same traffic loads that the road carries, so they must be designed accordingly. Depending on where the bridge is located, the cushion will vary. Structures must be designed to take into account the loads empty, full, surcharge, etc. along with factors such as live loads, width, force of braking, load dispersion within the fill, impact factor, and earth pressure. Referrals are required for relevant IRCs. It is necessary to design structural elements that can withstand maximum bending moment and shear force. The culvert crosses over the earthen embankment, so it is subject to the same traffic load as the roads as a result, it has to be designed for such loads acting on the culvert surface. 

by Shweta Singh Baghel | Kapil Mandaloi "Comparative Analysis of Box Culvert with Cushion and Without Cushion Usign Staad-Pro" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd47678.pdf 

Paper URL : https://www.ijtsrd.com/engineering/civil-engineering/47678/comparative-analysis-of-box-culvert-with-cushion-and-without-cushion-usign-staadpro/shweta-singh-baghel

ugcapprovedmanagementjournal, openaccessjournalofmanagement, paperpublicationinmanagement

Role of Advanced Machine Learning Techniques and Deep Learning Approach Based Decision Support System for Accurate Diagnosis of Severe Respiratory Diseases

Accurate Medical diagnosis is not always possible at every medical center, especially in the Developing Countries where poor healthcare services and lack of advanced diagnostic methods and equipments affects procedures of medical diagnosis .Also, physician intuition and experience are not always sufficient to achieve high quality medical procedures results. Therefore, diagnostic errors and undesirable results are reasons for a need for Machine Learning Techniques based decision support system, which in turns reduce diagnostic errors, increasing the patient safety and save lives. This research focuses on this aspect of Medical diagnosis by learning pattern through the collected dataset of respiratory diseases such as pneumonia and Covid 19, also consist implementation and test of intelligent medical decision support system to assist physicians and radiologists can deliver great assistance by improving their decision making ability. In this Research paper, the proposed System use Neural network Resnet 50 and transfer learning technique to classify these severe diseases and performs evaluation of precision, accuracy, speci city of Decision support system. 

by Patel Smitkumar Hareshbhai "Role of Advanced Machine Learning Techniques and Deep Learning Approach Based Decision Support System for Accurate Diagnosis of Severe Respiratory Diseases" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd47655.pdf 

Paper URL : https://www.ijtsrd.com/engineering/bio-mechanicaland-biomedical-engineering/47655/role-of-advanced-machine-learning-techniques-and-deep-learning-approach-based-decision-support-system-for-accurate-diagnosis-of-severe-respiratory-diseases/patel-smitkumar-hareshbhai

openaccessjournalofengineering, engineeringjournal, paperpublicationforengineering

A Review on Recent DGS Techniques on Multiband Microstrip Patch Antenna for Wireless Applications

In this paper, showing review multiband microstrip patch antennas based on many different design techniques and operating principles along with its properties and configurations. Multiband antennas have become attractive due to their inherent feature of being a single solution to many requirements associated with different frequency bands. For the compact communication devices and systems, a multiband antenna with efficient transmission and reception performance is essential. In this review paper, various methods implemented by different researchers to achieve multiband operation in microstrip patch antenna with improved parameters for different standards of wireless communication are summarized. 

by Kirti Mishra | Abdul Samee Khan | Ashish Pouranik "A Review on Recent DGS Techniques on Multiband Microstrip Patch Antenna for Wireless Applications" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd47637.pdf 

Paper URL : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/47637/a-review-on-recent-dgs-techniques-on-multiband-microstrip-patch-antenna-for-wireless-applications/kirti-mishra

internationaljournalsinengineering, callforpaperengineering, ugcapprovedengineeringjournal 

Numerical Simulation on Micromixing of Non Newtonian Fluids in a Stirred Tank Reactor by Using Parallel Reactions

Micromixing of Non newtonian fluid in a stirred tank reactor with Rushton turbine is investigated numerically by using E model. It is characterized by the product selectivity of parallel competitive reactions. Model is implemented and is validated using experimental data in the literature. The simulations show that a higher agitation speed, and a feeding location closer to the discharge area of the impeller favor micromixing and the reaction rate. These results provide useful guidelines for the scale up of industrial reactors of non Newtonian fluid with parallel chemical reactions, and the comparison between the experimental and numerical results confirms the accuracy of the simulations. 

by Atibeni, R. | Kamal, M. | Abduelmaged, A. | Ebrahim, A. "Numerical Simulation on Micromixing of Non-Newtonian Fluids in a Stirred-Tank Reactor by Using Parallel Reactions" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd47619.pdf 

Paper URL : https://www.ijtsrd.com/engineering/civil-engineering/47619/numerical-simulation-on-micromixing-of-nonnewtonian-fluids-in-a-stirredtank-reactor-by-using-parallel-reactions/atibeni-r

callforpaperchemistry, chemistryjournal, openaccessjournalofchemistry 

Field Controlled Picker Robot

Today, technology is developing at the same rate in line with rapidly increasing human needs. The efforts made to meet these needs make life easier with each passing day and these studies are concentrated on robotic arm studies. The robotic arms work with an external user or by performing predetermined commands. In this study, education health and so on. A field controlled picker robot is designed and applied. Realized picker robot one robot arm and 3 wheels. The robot arm, DC motor, distance sensor, line tracking sensor, L298N motor driver, arduino uno, 3.7V 3A lithium battery are mounted under and above this vehicle chassis. Line sensors allow the robot to start its movement within a certain area without allowing it to move out of the area. When the distance sensors in the front part of the vehicle detects an object within a certain distance, it stops the movement of the motors and starts the robot arm movement which is formed with the help of 4 servos. The robot arm bends to the front at an angle of 150 degrees from the initial state and squeezes the garbage in front of it with the handle. It then turns 180 degrees behind and leaves the object in its chamber. With this picker robot to be realized with this study, garbage collection, cleaning and so on. works can be realized unmanned.

by Abdülkadir ÇAKIR "Field Controlled Picker Robot" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd47588.pdf 

Paper URL : https://www.ijtsrd.com/engineering/mechanical-engineering/47588/field-controlled-picker-robot/abdülkadir-çakir

internationaljournalsinengineering, callforpaperengineering, ugcapprovedengineeringjournal 

Revised Right Hand Grip Rule for an AC DC Current

Right hand grip rule is perfect for Direct current DC but what about alternative current AC Alternating current AC is an electric current that periodically reverses its direction, so does magnetic field direction changes periodically, in contrast to direct current DC which only flows in a single direction which cannot change sporadically, so does magnetic field direction does not affect. So, rule need to be corrected and separated for both AC and DC current. What do you think 

by Mr. Darnesh "Revised Right Hand Grip Rule for an AC/DC Current" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd47645.pdf 

Paper URL : https://www.ijtsrd.com/engineering/electrical-engineering/47645/revised-right-hand-grip-rule-for-an-acdc-current/mr-darnesh

internationaljournalsofcomputerscience, callforpapercomputerscience, ugcapprovedjournalsforcomputerscience 

Review of Design and Analysis of Piston

The piston is one of the vital components of IC engine which is subjected to pressure exerted by fuel combustion. Continuous subjection to thermal and structural loads causes failures in piston. The current research reviews various researches conducted to investigate the type and causes of damages developed in piston. The study on effect of piston material, coating material and tribological behavior on piston structural characteristics are presented by various scholars. The researchers have used both experimental and numerical techniques in investigation of piston failures. 

by Manu Singhasth | Mrs. Poonam Diwan "Review of Design and Analysis of Piston" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd47572.pdf 

Paper URL : https://www.ijtsrd.com/engineering/mechanical-engineering/47572/review-of-design-and-analysis-of-piston/manu-singhasth

callforpaperchemistry, chemistryjournal, openaccessjournalofchemistry