Utilization of Super Pixel Based Microarray Image Segmentation

In the division of PC vision pictures, Super pixels are go probably as key part from 10 years prior. There are various counts and methodology to separate the Super pixels anyway whole all of them the best super pixel looking at strategy is Simple Linear Iterative Clustering SLIC have come to pivot continuously recently. The concentrating of small scale group quality verbalization from MRI imaging is more useful to perceive tumors or some other dangerous development contaminations, so the fundamental DNA cDNA microarray is a grounded device for analyzing the same. The division of microarray pictures is the essential development in a microarray assessment. In this paper, we proposed a figuring to dividing the cDNA small show picture using Simple Linear Iterative Clustering SLIC based Self Organizing Maps SOM method. In any case, the proposed figuring is taken up a moving task to look at the bad quality of pictures in addition. There are two phases to separate the image, introductory, a pre setting up the applied picture to diminish fuss levels and second, to piece the image using SLIC based SOM approach. 

by Mr. Davu Manikanta | Mr. Parasurama N | K Keerthi "Utilization of Super Pixel Based Microarray Image Segmentation" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd46274.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/46274/utilization-of-super-pixel-based-microarray-image-segmentation/mr-davu-manikanta

callforpaperpharmacy, pharmacyjournal, internationalpeerreviewedjournal

Analysis and Implementation of Maximum Power Point Tracking Using Conventional P and O Algorithm for Hybrid System in Different Atmospheric Conditions

As we know, energy generated from the solar and wind systems is not necessarily continuous and consistent. In India, the weather also varies such that in gloomy conditions there will be limited power from the PV battery, while in summer it will be at its highest. So, the weather decreases the systems effectiveness. As a result, an energy efficient approach is required to find an optimum point of action to obtain the full amount of energy under various atmospheric conditions. This paper suggested an updated turbulence and maximal power point monitoring controller for wind and solar hybrid energy systems. The controller uses the modified fixed disruption and observation system to achieve the MPP by changing the service cycle of each input module. Results are presented on a 200W wind system as well as a 400W solar wind energy system with differing irradiation strength and wind speed to illustrate the merits of the experiment. 

by Majhar Ali Ansari | Pramod Kumar Rathore "Analysis and Implementation of Maximum Power Point Tracking Using Conventional P & O Algorithm for Hybrid System in Different Atmospheric Conditions" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd46298.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/46298/analysis-and-implementation-of-maximum-power-point-tracking-using-conventional-p-and-o-algorithm-for-hybrid-system-in-different-atmospheric-conditions/majhar-ali-ansari

callforpaperinternationaljournal, ugclistofjournals, bestinternationaljournal 

Analysis and Implementation of Power Quality Enhancement Techniques in Hybrid AC DC Microgrid

With the growth in global warming, renewable energy based distributed generators DGs play a prominent role in power generation. Wind, solar energy, biomass, mini hydro, and the usage of fuel cells and microturbines will provide substantial impetus in the near future. Environmental friendliness, expandability, and flexibility have made distributed generation, powered by a variety of renewable and unconventional energy sources, an appealing alternative for building contemporary electrical systems. A microgrid is made up of a group of loads and dispersed generators that work together to form a single controlled system. Microgrids, as an integrated energy delivery system, may function in tandem with or independently of the main power grid. The microgrid idea reduces the number of reverse conversions in a single AC or DC grid while also making it easier to link variable renewable AC and DC sources and loads to power systems. The connectivity of DGs to the utility grid through power electronic converters has raised concerns regarding equipment safety and protection. The microgrid may be configured to fulfil the customers specific needs, such as greater local dependability, reduced feeder losses, local voltage support, greater efficiency via waste heat usage, voltage sag correction, or uninterruptible power supply. The performance of a hybrid AC DC microgrid system in grid tethered mode is examined in this paper. For the creation of a microgrid, a solar system, a wind turbine generator, and a battery are utilized. Control methods are also included to allow the converters to appropriately coordinate the AC sub grid with the DC sub grid. The MATLAB SIMULINK environment was used to achieve the findings. 

by Tarun Jaiswal | Ashish Bhargava "Analysis and Implementation of Power Quality Enhancement Techniques in Hybrid AC/DC Microgrid" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd46296.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/46296/analysis-and-implementation-of-power-quality-enhancement-techniques-in-hybrid-acdc-microgrid/tarun-jaiswal

peerreviewedinternationaljournal, callforpaperinugcapprovedjournals, paperpublicationforstudent

IOT Based Patient Health Monitoring System Using WIFI

Health is given the extreme importance now a days by each country with the advent of the novel corona virus. So in this aspect, an IOT based patient health monitoring system is the best solution for such an epidemic. With an improvement in technology and miniaturization of sensors, there have been attempts to utilize the new technology in various areas to improve the quality of human life. As a result, this project is an attempt to solve a health care problem currently society is facing covid 19.The main objective of the project was to design for to reduce the corona virus, reduce the components and man power. The framework can be utilized to constantly screen the wellbeing parameters of a patient. The body temperature, heart rate and spo2 can be measured from anyplace on the globe utilizing IOT Internet of Things . IOT monitoring of health helps in preventing the spread of disease as well as to get a proper diagnosis of the state of health, even if the doctor is at far distance. We proposed a nonstop checking and control instrument to screen the patient condition and store the patient information’s in server utilizing Wi Fi Module based remote correspondence. Hence the proposed architecture collects the sensor data through ESP32 microcontroller and relays it to the WIFI where it is processed and analyzed for remote viewing. Feedback actions based on the analyzed data can be sent back to the doctor or guardian through Google sheet and or SMS alerts in case of any emergencies. 

by Marupuri Usha Priya | Muthu Pandi K | Priya S | Dr. Kishore Kumar Arjunsingh "IOT Based Patient Health Monitoring System Using WIFI" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd45143.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/45143/iot-based-patient-health-monitoring-system-using-wifi/marupuri-usha-priya

ugcapprovedmanagementjournal, openaccessjournalofmanagement, paperpublicationinmanagement

Energy Management Scheme in Photovoltaic Based DC Microgrid

This paper explores the need for renewable based DC microgrid and proposes characteristic features of a standalone DC microgrid. The need for energy management system and its role in DC microgrid has been emphasized. Renewable generating sources such as wind turbine generator and photovoltaic panel require stringent control for harnessing maximum available energy, energy storage system demands efficient management, and DC link voltage must be maintained constant. Microgrid is a small modular and distributed power generation and distribution system that combines power quality management and enduser energy utilization technology based on distributed power generation technology based on distributed resources or users small scale power plants. The solar based DC Microgrid has been proposed from the following controller and two compensation systems, . It forms a system of three rings, and feeds each load. Load balancing and voltage regulation are the main aspects for designing the model. The voltage is kept constant at 48V in the voltage control loop. Advantages of DC microgrids include easy control, high system efficiency and low energy conversion. The centralized monitoring controller has been designed to control current sharing and voltage regulation together in a PV based DC microgrid. Ovais 

by Ahmad Parray | Mohd Ilyas "Energy Management Scheme in Photovoltaic Based DC Microgrid" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd45200.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/45200/energy-management-scheme-in-photovoltaic-based-dc-microgrid/ovais-ahmad-parray

callforpaperpapersinjournals, specialissuepublication, multidisciplinaryjournal

Technologies and Techniques through Passive Architecture for Human Comfort in Buildings

A large portion of the energy vessel in structures is utilized in conditioner the environment of the idleness climate for warming ventilation and cooling HVAC and furthermore for the fake lighting. The point most to decrease the negative and boost the latent effects of the outer environment, so the necessity for the regular HVAC administrations can be limited. Respectable innovations, for example, sun oriented photovoltaic cells and advances which work on the activity of the environment control administrations are likewise included. The primary constants are set by central structure plan choices impediment on the innovations which it is feasible to apply in some random circumstance are the environment, the structure type and its capacity. These boundaries ordinary fall beyond the plan interaction. The significant highlights for the thought under each heading are given. 

by Dr. Mukesh Kumar Lalji "Technologies and Techniques through Passive Architecture for Human Comfort in Buildings" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd45245.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/45245/technologies-and-techniques-through-passive-architecture-for-human-comfort-in-buildings/dr-mukesh-kumar-lalji

openaccessjournalofengineering, engineeringjournal, paperpublicationforengineering

Optimization of Agriculture Tractor Seat Vibration Using Passive Suspension System and Modelling and Simulating in Ansys

Operators of agricultural tractor perform various tasks at work that expose them to a variety of risk factors. During their work, agricultural tractor operators are exposed to different negative influences, due to which vibrations are especially harmful. Long term exposure of tractor driver to vibrations induced by agricultural tractor operations may lead to various health problems. It is widely recognised that agricultural tractor operators are exposed to high level of whole body vibration WBV during specific farm operations. WBV may leads to Low back Pain LBP and spinal cord related diseases, therefore the objective of the study is to reduce the level of ride vibrations experienced by tractor seats appear to be necessary and some possible methods of achieving significant improvements. In the present study, The vibration transmitted through the seat of a four wheel drive tractor equipped with front suspension axle and shock absorber for the implement, were measured using OR34 2, 4 Channel FFT analyser and then analysed in terms of root mean square RMS accelerations according to the ISO standard. Several tests were conducted in different conditions considering the type of operation harrowing, ploughing and cultivating at different road conditions on road, sugarcane field and flat field with two different running speeds. Then we developed a new suspension system for tractors seat using spring and dampers to reduce the vibration energy and frequencies up to a suitable range for the operator. The vehicle dynamics model of tractor with tandem suspension is modelled and simulated in analysis software ANSYS and optimize the parameters of the seat to achieve rms acceleration in the range of -˜Health guidance caution zone’ HGCZ so that it gives the ride comfort for the operator. 

by Prof. G. N. Kadam | Yashwant A. Deshmukh "Optimization of Agriculture Tractor Seat Vibration Using Passive Suspension System and Modelling and Simulating in Ansys" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd45092.pdf 

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/45092/optimization-of-agriculture-tractor-seat-vibration-using-passive-suspension-system-and-modelling-and-simulating-in-ansys/prof-g-n-kadam

internationaljournalofscience, openaccessjournalofscience, ugcapprovedjournalsforscience