Experimental Study on Performance of Metakaolin in Pervious Concrete

Lately, part of examination center around growing new Supplementary cementitious material to fortifying the solid. These materials are utilized as a piece of concretes. Metakaolin is one of the beneficial cementitious materials which are part of the way traded for concrete. Properties of cement with metakaolin are generally favored added substances in concrete. Pervious cement is an uncommon kind of cement with a high porosity utilized for solid flatwork applications that permits water from precipitation and different sources to go straightforwardly through, in this manner diminishing the spillover from a site and permitting groundwater re energize. It likewise called as Porous concrete, Permeable concrete, No fines concrete and Porous asphalt. Pervious cement is generally utilized in stopping zones, territories with light traffic, Residential roads, Pedestrian walkways and nurseries. It is a significant application for manageable development. Metakaolin will be added at various rates or percentages such as 1 ,1.5 ,2 ,2.5 by the heaviness of concrete. To make concrete cubes and cylinders at every percent. The effect of metakaolin at various percents in pervious concrete will be finding by conducting compression test. 

by A. Thomas Eucharist | K. Viswanathan "Experimental Study on Performance of Metakaolin in Pervious Concrete" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-4 , June 2021, 

URL: https://www.ijtsrd.compapers/ijtsrd41139.pdf 

Paper URL: https://www.ijtsrd.comengineering/civil-engineering/41139/experimental-study-on-performance-of-metakaolin-in-pervious-concrete/a-thomas-eucharist

callforpaperchemistry, chemistryjournal, openaccessjournalofchemistry 

Ways of Utilization of Dust from Cement Plants

The article discusses the properties of crushed stone lime asphalt concrete and the conditions for obtaining a high quality road surface during its application. The results of the study of replacing mineral powder in crushed stone asphalt concrete with dust, dust from cement plants and dust from pyrite slag, as well as a study of the stability of the quality of bitumen in time to normal and high temperatures are described. However, the selected areas of using cement plant dust cannot be considered particularly promising, since in the above methods, cement plant dust is easily replaced by chalk and limestone. In this regard, it is more promising to use dust from cement plants to obtain nitrogen calcium fertilizers, mainly containing calcium nitrate. 

by Xidirova Yulduz Xo’janazarovna | Rosilov Mansur Sirgievich | Badalova N "Ways of Utilization of Dust from Cement Plants" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd40001.pdf 

Paper URL: https://www.ijtsrd.com/engineering/chemical-engineering/40001/ways-of-utilization-of-dust-from-cement-plants/xidirova-yulduz-xo’janazarovna

callforpapertechnology, technologyjournal

Review on Design and Analysis of Front Bumper

Proper design of front bumper is essential in safeguarding engine bay during low impact collisions. The energy absorption characteristics of bumpers should be good enough to absorb impact energy without causing any damage to internal parts. The current research studies the various analysis conducted on front bumper using numerical and experimental techniques to determine the effect of various composite materials, high strength sheet moulding compounds and reinforced rib on improving energy absorption characteristics of bumper. 

by J Chakravarthi | Dr. Alok Sharma "Review on Design & Analysis of Front Bumper" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd39989.pdf 

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/39989/review-on-design-and-analysis-of-front-bumper/j-chakravarthi

callforpaperarts, artsjournal, peerreviewedjournal 

Analysis and Simulation of Solar PV Connected with Grid Accomplished with Boost Converter and PWM Based Inverter

This paper deals with a solar PV array connected with grid system. This system consists of PV cells with 30 KW system, Boost converter, three phase inverter with suitable control system and three phase load. This paper gives analysis of each components of the system. The output voltage from the solar PV cells are variable according to radiation intensity and temperature so in order to connect with grid the output voltage should be fixed and converted to AC voltage and this job will be done by an inverter. A very effective control system has been developed for the inverter based on pulse width modulation. This paper presents an intensive performance and dynamic behavior of a grid related PV energy conversion system. The PV system is developed and simulated with the help of MATLAB Simulink software environment. 

by Abhishek Verma | Dr. Anup Mishra | Brahma Nand Thakur "Analysis and Simulation of Solar PV Connected with Grid Accomplished with Boost Converter and PWM Based Inverter" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd40056.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/40056/analysis-and-simulation-of-solar-pv-connected-with-grid-accomplished-with-boost-converter-and-pwm-based-inverter/abhishek-verma

callforpaperpapersinjournals, multidisciplinaryjournal

Design, Development, Fabrication and Testing of Small Vertical Axis Wind Turbinev

An experimental investigation has been carried has been carried out on a design, Development, Fabrication, and Testing of small Vertical axis wind turbine. An extremely simple design, of a vertical axis wind rotor using two flat vertical Vanes, swinging vanes has been fabricated and tested to obtain its performance. The torque and power coefficient have been obtained and presented in this paper the result are highly encouraging and indicate the usefulness of the swinging vane rotor at low wind regions. This paper is presented on the basis of technology two blade vertical axis wind turbine system. 

by Dr. Mukesh Kumar Lalji "Design, Development, Fabrication and Testing of Small Vertical Axis Wind Turbinev" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd39817.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/39817/design-development-fabrication-and-testing-of-small-vertical-axis-wind-turbinev/dr-mukesh-kumar-lalji

callforpapereconomics, economicsjournal

Design Development and Analytical Process of Small Vertical Axis Wind Turbine

The speed of wind in meter per second. Sensor plays an important role in censoring the velocity of wind. The design and fabrication operations, we evaluate the performance of machine through the show experimental setup. Experimental setup consists assembly of various component and equipment already described at initial phase. Blower, Anemometer and sensor are other equipment for facilitation of procedure. When we start the blower, the wind velocity strikes the blades of rotor, which start rotating due to its effect. 

by Dr. Mukesh Kumar Lalji "Design Development & Analytical Process of Small Vertical Axis Wind Turbine" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd39873.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/39873/design-development-and-analytical-process-of-small-vertical-axis-wind-turbine/dr-mukesh-kumar-lalji

ugcapprovedjournalswithlowpublicationfees

Modelling and Analysis of High Rise Structure Using Different Shapes of RC Shear Wall for High Seismic Zone Using Flat Slab

RCC walls including shear walls are the usual multi Storied Buildings requirements. In past researches high rise structure without RC Shear Wall is not safe for earthquake force. No comparative analysis of structures on seismic behavior of high rise structure by using of RC Shear wall with flat slab. Present work is comparative study of the behaviour of high rise 16 Storey buildings with and without RC Shear wall using flat slab. Modelling and Analysis of high rise structure using STAAD PRO V8i Software. STAAD PRO software which is based on the application of Finite Element Method. This software is a widely used in the field of structural design and analysis. Now a day this software is very much friendly for the analysis of different type of structures and to calculate the result at every node and element wise. Here three cases are consider for study 16 Storey buildings and analysis displacement, shear force and bending moments generated in structure with and without RC Shear wall using flat slab. 

by Aakanksha Vaman Chaudhari | Nitesh Kushwaha | Prof. Afzal Khan "Modelling and Analysis of High Rise Structure Using Different Shapes of RC Shear Wall for High Seismic Zone Using Flat Slab" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd41121.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/41121/modelling-and-analysis-of-high-rise-structure-using-different-shapes-of-rc-shear-wall-for-high-seismic-zone-using-flat-slab/aakanksha-vaman-chaudhari

callforpaperinternationaljournal, ugclistofjournals, bestinternationaljournal