Ways of Utilization of Dust from Cement Plants

The article discusses the properties of crushed stone lime asphalt concrete and the conditions for obtaining a high quality road surface during its application. The results of the study of replacing mineral powder in crushed stone asphalt concrete with dust, dust from cement plants and dust from pyrite slag, as well as a study of the stability of the quality of bitumen in time to normal and high temperatures are described. However, the selected areas of using cement plant dust cannot be considered particularly promising, since in the above methods, cement plant dust is easily replaced by chalk and limestone. In this regard, it is more promising to use dust from cement plants to obtain nitrogen calcium fertilizers, mainly containing calcium nitrate. 

by Xidirova Yulduz Xo’janazarovna | Rosilov Mansur Sirgievich | Badalova N "Ways of Utilization of Dust from Cement Plants" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd40001.pdf 

Paper URL: https://www.ijtsrd.com/engineering/chemical-engineering/40001/ways-of-utilization-of-dust-from-cement-plants/xidirova-yulduz-xo’janazarovna

callforpapertechnology, technologyjournal

Review on Design and Analysis of Front Bumper

Proper design of front bumper is essential in safeguarding engine bay during low impact collisions. The energy absorption characteristics of bumpers should be good enough to absorb impact energy without causing any damage to internal parts. The current research studies the various analysis conducted on front bumper using numerical and experimental techniques to determine the effect of various composite materials, high strength sheet moulding compounds and reinforced rib on improving energy absorption characteristics of bumper. 

by J Chakravarthi | Dr. Alok Sharma "Review on Design & Analysis of Front Bumper" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd39989.pdf 

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/39989/review-on-design-and-analysis-of-front-bumper/j-chakravarthi

callforpaperarts, artsjournal, peerreviewedjournal 

Analysis and Simulation of Solar PV Connected with Grid Accomplished with Boost Converter and PWM Based Inverter

This paper deals with a solar PV array connected with grid system. This system consists of PV cells with 30 KW system, Boost converter, three phase inverter with suitable control system and three phase load. This paper gives analysis of each components of the system. The output voltage from the solar PV cells are variable according to radiation intensity and temperature so in order to connect with grid the output voltage should be fixed and converted to AC voltage and this job will be done by an inverter. A very effective control system has been developed for the inverter based on pulse width modulation. This paper presents an intensive performance and dynamic behavior of a grid related PV energy conversion system. The PV system is developed and simulated with the help of MATLAB Simulink software environment. 

by Abhishek Verma | Dr. Anup Mishra | Brahma Nand Thakur "Analysis and Simulation of Solar PV Connected with Grid Accomplished with Boost Converter and PWM Based Inverter" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd40056.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/40056/analysis-and-simulation-of-solar-pv-connected-with-grid-accomplished-with-boost-converter-and-pwm-based-inverter/abhishek-verma

callforpaperpapersinjournals, multidisciplinaryjournal

Design, Development, Fabrication and Testing of Small Vertical Axis Wind Turbinev

An experimental investigation has been carried has been carried out on a design, Development, Fabrication, and Testing of small Vertical axis wind turbine. An extremely simple design, of a vertical axis wind rotor using two flat vertical Vanes, swinging vanes has been fabricated and tested to obtain its performance. The torque and power coefficient have been obtained and presented in this paper the result are highly encouraging and indicate the usefulness of the swinging vane rotor at low wind regions. This paper is presented on the basis of technology two blade vertical axis wind turbine system. 

by Dr. Mukesh Kumar Lalji "Design, Development, Fabrication and Testing of Small Vertical Axis Wind Turbinev" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd39817.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/39817/design-development-fabrication-and-testing-of-small-vertical-axis-wind-turbinev/dr-mukesh-kumar-lalji

callforpapereconomics, economicsjournal

Design Development and Analytical Process of Small Vertical Axis Wind Turbine

The speed of wind in meter per second. Sensor plays an important role in censoring the velocity of wind. The design and fabrication operations, we evaluate the performance of machine through the show experimental setup. Experimental setup consists assembly of various component and equipment already described at initial phase. Blower, Anemometer and sensor are other equipment for facilitation of procedure. When we start the blower, the wind velocity strikes the blades of rotor, which start rotating due to its effect. 

by Dr. Mukesh Kumar Lalji "Design Development & Analytical Process of Small Vertical Axis Wind Turbine" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd39873.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/39873/design-development-and-analytical-process-of-small-vertical-axis-wind-turbine/dr-mukesh-kumar-lalji

ugcapprovedjournalswithlowpublicationfees

Modelling and Analysis of High Rise Structure Using Different Shapes of RC Shear Wall for High Seismic Zone Using Flat Slab

RCC walls including shear walls are the usual multi Storied Buildings requirements. In past researches high rise structure without RC Shear Wall is not safe for earthquake force. No comparative analysis of structures on seismic behavior of high rise structure by using of RC Shear wall with flat slab. Present work is comparative study of the behaviour of high rise 16 Storey buildings with and without RC Shear wall using flat slab. Modelling and Analysis of high rise structure using STAAD PRO V8i Software. STAAD PRO software which is based on the application of Finite Element Method. This software is a widely used in the field of structural design and analysis. Now a day this software is very much friendly for the analysis of different type of structures and to calculate the result at every node and element wise. Here three cases are consider for study 16 Storey buildings and analysis displacement, shear force and bending moments generated in structure with and without RC Shear wall using flat slab. 

by Aakanksha Vaman Chaudhari | Nitesh Kushwaha | Prof. Afzal Khan "Modelling and Analysis of High Rise Structure Using Different Shapes of RC Shear Wall for High Seismic Zone Using Flat Slab" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd41121.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/41121/modelling-and-analysis-of-high-rise-structure-using-different-shapes-of-rc-shear-wall-for-high-seismic-zone-using-flat-slab/aakanksha-vaman-chaudhari

callforpaperinternationaljournal, ugclistofjournals, bestinternationaljournal 

Security Enhancement and Eminent Verification Measures of Global Distinctive E Passport

Electronic Passport is one of the results of the electronic revolution in The World since the passport is the document of the person in terms of identity and nationality and is the property of the country. One of the most important Challenges is to protect this document from forgery. The common forgery for the Passport is replacing its holder photo. The proposed system concentrates on the Security part of the e passport. It consists of two parts the first part is hiding of the security code by using steganography and storing the same code in the issuing Country of the e passport. The other part will be operated at the control point of the destination country to make sure of the e passport validity by checking the Hidden code using NFC and verify it with the one. If the two values are equal, then the system will compute a key using Diffie Hellman Key Exchange. This Key will be used to read the secret information. The project designed is an Authentication system where the Passport holder is authorized through Technology. Electronic passports include contactless chip which stores personal Data of the passport holder, information about the passport and the issuing Institution. In its simplest form an electronic passport contains just a collection of Read only files, more advanced variants can include sophisticated cryptographic Mechanisms protecting security of the document and or privacy of the passport Holder. 

by Dr. R. Mohana Priya | V. Bharanitharan | S. Clementinbaraj | R. Kirubaharan "Security Enhancement and Eminent Verification Measures of Global Distinctive E-Passport" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd41101.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/41101/security-enhancement-and-eminent-verification-measures-of-global-distinctive-epassport/dr-r-mohana-priya

internationaljournalsofcomputerscience, callforpapercomputerscience, ugcapprovedjournalsforcomputerscience