Analysis and Simulation of Solar PV Connected with Grid Accomplished with Boost Converter and PWM Based Inverter

This paper deals with a solar PV array connected with grid system. This system consists of PV cells with 30 KW system, Boost converter, three phase inverter with suitable control system and three phase load. This paper gives analysis of each components of the system. The output voltage from the solar PV cells are variable according to radiation intensity and temperature so in order to connect with grid the output voltage should be fixed and converted to AC voltage and this job will be done by an inverter. A very effective control system has been developed for the inverter based on pulse width modulation. This paper presents an intensive performance and dynamic behavior of a grid related PV energy conversion system. The PV system is developed and simulated with the help of MATLAB Simulink software environment. 

by Abhishek Verma | Dr. Anup Mishra | Brahma Nand Thakur "Analysis and Simulation of Solar PV Connected with Grid Accomplished with Boost Converter and PWM Based Inverter" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd40056.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/40056/analysis-and-simulation-of-solar-pv-connected-with-grid-accomplished-with-boost-converter-and-pwm-based-inverter/abhishek-verma

callforpaperpapersinjournals, multidisciplinaryjournal

Design, Development, Fabrication and Testing of Small Vertical Axis Wind Turbinev

An experimental investigation has been carried has been carried out on a design, Development, Fabrication, and Testing of small Vertical axis wind turbine. An extremely simple design, of a vertical axis wind rotor using two flat vertical Vanes, swinging vanes has been fabricated and tested to obtain its performance. The torque and power coefficient have been obtained and presented in this paper the result are highly encouraging and indicate the usefulness of the swinging vane rotor at low wind regions. This paper is presented on the basis of technology two blade vertical axis wind turbine system. 

by Dr. Mukesh Kumar Lalji "Design, Development, Fabrication and Testing of Small Vertical Axis Wind Turbinev" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd39817.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/39817/design-development-fabrication-and-testing-of-small-vertical-axis-wind-turbinev/dr-mukesh-kumar-lalji

callforpapereconomics, economicsjournal

Design Development and Analytical Process of Small Vertical Axis Wind Turbine

The speed of wind in meter per second. Sensor plays an important role in censoring the velocity of wind. The design and fabrication operations, we evaluate the performance of machine through the show experimental setup. Experimental setup consists assembly of various component and equipment already described at initial phase. Blower, Anemometer and sensor are other equipment for facilitation of procedure. When we start the blower, the wind velocity strikes the blades of rotor, which start rotating due to its effect. 

by Dr. Mukesh Kumar Lalji "Design Development & Analytical Process of Small Vertical Axis Wind Turbine" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd39873.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/39873/design-development-and-analytical-process-of-small-vertical-axis-wind-turbine/dr-mukesh-kumar-lalji

ugcapprovedjournalswithlowpublicationfees

Modelling and Analysis of High Rise Structure Using Different Shapes of RC Shear Wall for High Seismic Zone Using Flat Slab

RCC walls including shear walls are the usual multi Storied Buildings requirements. In past researches high rise structure without RC Shear Wall is not safe for earthquake force. No comparative analysis of structures on seismic behavior of high rise structure by using of RC Shear wall with flat slab. Present work is comparative study of the behaviour of high rise 16 Storey buildings with and without RC Shear wall using flat slab. Modelling and Analysis of high rise structure using STAAD PRO V8i Software. STAAD PRO software which is based on the application of Finite Element Method. This software is a widely used in the field of structural design and analysis. Now a day this software is very much friendly for the analysis of different type of structures and to calculate the result at every node and element wise. Here three cases are consider for study 16 Storey buildings and analysis displacement, shear force and bending moments generated in structure with and without RC Shear wall using flat slab. 

by Aakanksha Vaman Chaudhari | Nitesh Kushwaha | Prof. Afzal Khan "Modelling and Analysis of High Rise Structure Using Different Shapes of RC Shear Wall for High Seismic Zone Using Flat Slab" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd41121.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/41121/modelling-and-analysis-of-high-rise-structure-using-different-shapes-of-rc-shear-wall-for-high-seismic-zone-using-flat-slab/aakanksha-vaman-chaudhari

callforpaperinternationaljournal, ugclistofjournals, bestinternationaljournal 

Security Enhancement and Eminent Verification Measures of Global Distinctive E Passport

Electronic Passport is one of the results of the electronic revolution in The World since the passport is the document of the person in terms of identity and nationality and is the property of the country. One of the most important Challenges is to protect this document from forgery. The common forgery for the Passport is replacing its holder photo. The proposed system concentrates on the Security part of the e passport. It consists of two parts the first part is hiding of the security code by using steganography and storing the same code in the issuing Country of the e passport. The other part will be operated at the control point of the destination country to make sure of the e passport validity by checking the Hidden code using NFC and verify it with the one. If the two values are equal, then the system will compute a key using Diffie Hellman Key Exchange. This Key will be used to read the secret information. The project designed is an Authentication system where the Passport holder is authorized through Technology. Electronic passports include contactless chip which stores personal Data of the passport holder, information about the passport and the issuing Institution. In its simplest form an electronic passport contains just a collection of Read only files, more advanced variants can include sophisticated cryptographic Mechanisms protecting security of the document and or privacy of the passport Holder. 

by Dr. R. Mohana Priya | V. Bharanitharan | S. Clementinbaraj | R. Kirubaharan "Security Enhancement and Eminent Verification Measures of Global Distinctive E-Passport" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd41101.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/41101/security-enhancement-and-eminent-verification-measures-of-global-distinctive-epassport/dr-r-mohana-priya

internationaljournalsofcomputerscience, callforpapercomputerscience, ugcapprovedjournalsforcomputerscience

An Analysis of Mechanical Properties and Flexural Behavior of Concrete Slabs Reinforced with H.F.R.P Reinforcements

In the era of concrete, concrete is exposed to chemical, such as carbonation and chloride adulteration break down the alkaline barrier in the cement. Subsequently, steel in the concrete becomes corrosive. Such phenomena lead to erosion of concrete at the reinforcement level, cracking and spelling of concrete due to volume increase of steel reinforcement. Different methods were investigated to overcome corrosion by numerous researchers.According to A.S.T.M D792 13 standards the density of H.F.R.P bars have been evaluated the experimental value with 0.1mg precision. As per the standards, the H.F.R.P bars are weighed. Then, the H.F.R.P bar is immersed in distilled water at 230C and the wet weight of the bar is noted. The weight of the Sinker in immersed condition is also noted.The laboratory tests carried out to evaluate the physical and mechanical properties of the newly developed H.F.R.P bars and are compared with that of conventional bars. The bond properties of H.F.R.P bars with concrete is also determined. Finally, it explains the experimental investigations on the flexural behavior of concrete one way slabs reinforced with H.F.R.P reinforcements under static loading and are compared with conventional ones. The stress strain performance of the sand coated H.F.R.P bar is linear, lacking yield point up to the failure transverse shear strength is 3 times lesser than the tensile strength of the H.F.R.P bars. Thermal properties of fibers are substantially different in the longitudinal and transverse direction. Therefore the thermal characteristics vary between products according to the fiber, matrix and the fiber volume ratio. In this study the longitudinal Coefficient of linear thermal expansion is 7.5 x 10 6 oC to 9x 10 6 oC. Whereas the transverse Coefficient of linear thermal expansion is between 15 x 10 6 oC to 20 x 10 6 oC. Load deflection graphs drawn exhibits the accordance between experimental and FEM ANSYS observations. The reduced deflection of FEM is due to the rigidness of meshing. The results also confer about the effect of tension stiffening and the bond slip. From the comparison it has been observed that experimental deflections vary from 1.03 to 1.37 times higher than the FEM deflections. 

by Prerna Vaidya | Prof. Nitesh Kushwaha | Prof. Afzal Khan "An Analysis of Mechanical Properties and Flexural Behavior of Concrete Slabs Reinforced wi

th H.F.R.P Reinforcements" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd38691.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/38691/an-analysis-of-mechanical-properties-and-flexural-behavior-of-concrete-slabs-reinforced-with-hfrp-reinforcements/prerna-vaidya

ugcapprovedmanagementjournal, openaccessjournalofmanagement, paperpublicationinmanagement

Implementation of Medical Image Analysis using Image Processing Techniques

 Clinical imaging is playing a fundamental limit in assessment and patching of affliction and discovering tumors and finding of threatening cells in less than ideal stage. As a standard system for perceiving bone features, is minute pictures were used. These photos are secured by using small radiography, where it expected to reiterated, drawn out and work raised measure. This method cant recognize the destructive cells because of the presence of uproar in the photos. Hence there is a necessity for automated and strong strategies to finish the image planning examination. As a first stage, the most fundamental piece of picture planning is to denoising without barging in on the diagnostics information during the clearing of commotion. The past collaboration disposes of the uproar and present fog in the image. To get precise picture getting ready, we have executed fragile and hard breaking point with various coefficients and to check the edge Visu wither was used. It was found that the Wavelet deionsing gadget was a helpful resource for picture improvement. In the gathering, our proposed work was connected with pre planning methodology to wipe out the noise and to get smooth pictures. This collaboration will help with improving the idea of the image and besides take out the fake areas. To recognize the presence of bone illness and to choose its stage, K infers estimation was used and thusly to get smooth picture, edge division measure was performed. 

by Miss. Kode Keerthi | Mr. Parasurama N "Implementation of Medical Image Analysis using Image Processing Techniques" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd39893.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/39893/implementation-of-medical-image-analysis-using-image-processing-techniques/miss-kode-keerthi

internationaljournalofmanagement, callforpapermanagement, managementjournal