Wednesday, September 23, 2020

Enhance the Bacterial Activity on Compressive Strength of Cement Concrete and Quantification of Crack Healing in Bacteria Based Self Healing Concrete

The investigation work is for improvement of the compressive strength of concrete by self healing property. We used Bacillus sphaericus as bacteria and calcium lactate as nutrient. We used M25 M30and M35 grade of concrete for the work. It was observed that for M25 grade of bio concrete the compressive strength was nearly 17 more than that of conventional concrete after 3 days, nearly 20.5 after 7 days, nearly 22.53 after 14 days, nearly 25.27 after 28 days of curing. It was observed that for M30 grade of bio concrete the compressive strength was nearly 15.5 more than that of conventional concrete after 3 days, nearly 24.75 after 7 days, nearly 27.44 after 14 days and 29.47 after 28 days of curing. 

by Uttam Tiwary | Dr. A. K Saxena "Enhance the Bacterial Activity on Compressive Strength of Cement Concrete and Quantification of Crack-Healing in Bacteria Based Self-Healing Concrete" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd33459.pdf

Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/33459/enhance-the-bacterial-activity-on-compressive-strength-of-cement-concrete-and-quantification-of-crackhealing-in-bacteria-based-selfhealing-concrete/uttam-tiwary

internationaljournalofmanagement, callforpapermanagement, managementjournal 

Analysis of Ferrocement Jacketing on Retrofitted Beams

Almost all the structures whether or not or not industrial, business or housing area unit fabricated from RCC. There structure fare nicely to a lower place ancient circumstances, but among the event of maximum earthquakes, giant load imposition etc. The permanent injury may takes place in structure. It poses a more durable scenario for a structural engineer than constructing a replacement building. This could be as a result of form of restraints associate already created building offers like non designed construction, wear and tear etc. instead of torning apart the structure one can strengthen the deficient structural elements of the structure. As a result of the advancement in technology with the help of non destructive testing one can merely verify such deficient elements. Once known the only reply is to retrofit such elements. Retrofitting is completely completely different from repair or rehabilitation. Its primarily a way of strengthening Associate in Nursingd sweetening of the performance of deficient structural elements in an extremely structure or as complete structure. In deficient buildings retrofitting could also be done by increasing the strength, stiffness and or malleability of its specific constituent elements or of the whole building. For any building, relying upon the need, a mixture of the on prime of could also be elite. Retrofitting of individual members or elements is remarked as native retrofitting. Someone is not once it involves spoilt for alternatives retrofitting, he possesses to detain mind form of selections before embarking on the work of retrofitting. The alternatives on the market embrace fiber bolstered Plastic or GFRP, Carbon Fibre bolstered Plastic or CFRP or Ferrocement. He has to keep up a balance between handiness, aesthetic, significantly economy and simple operational. Ferrocement jacketing though lacks among the esthetic 0.5 but it wins by leaps and bounds altogether different problems. The reason for this could be its readily on the market, is easy to work with and is not even ¼ as costly as GFRP or CFRP.The endeavour of our gift study is to observe the impact of varied share of tensile reinforcements on the behaviour of beams retrofit with ferrocement jacketing. The impact of share increase in tensile reinforcement vice versa the share increase in final load carrying capability is calclulated. Combined deflections of retrofitted and non retrofitted beams area unit compared at altogether completely different stress levels. The results shows an increase in load carrying capability of retrofit beams though the increase varies with share of tensile reinforcements. The share increase in load carrying capability is most simply just in case of two bars of eight metric linear unit us intelligence as tensile reinforcement. The deflections conjointly diminished considerably with the increase in share of tensile reinforcement. 

by Umashankar Prajapati "Analysis of Ferrocement Jacketing on Retrofitted Beams" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd33455.pdf

Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/33455/analysis-of-ferrocement-jacketing-on-retrofitted-beams/umashankar-prajapati

callforpapersocialscience, ugcapprovedjournalsforsocialscience, socialsciencejournal

A Research on Study the Behaviour of Concrete using Waste Tires Chips

Concrete is one in all the principal wide utilized development materials in the world. Regular assets rises a developing worry for shielding the environmental factors and a need to save common assets, by different material which territory unit reused or waste materials during this examination, an investigation was applied on the work of reused elastic tires as a fractional substitution for coarse Aggregates in Concrete development utilizing provincially reachable waste tires. In the principal a piece of this proposal, the foundation of the investigation The examination was applied by leading tests on the Waste materials to see their properties and reasonableness for the analysis. Concrete Was prepared comprising of 3 Concrete evaluations M20 and M25 . The examples were made with extent substitutions of the coarse blend by ten, twenty five and fifty endeavor elastic blend. Besides, an orientation join with no substitution of the coarse blend was made to make a similar examination. The arrangements of tests led are droop, unit weight, compressive quality, lastingness, sway obstruction and flexural quality tests. the data collection was predominantly upheld the tests led on the prepared examples inside the research center. The check results were contrasted and the few run of the mill Concrete properties and show that theres a rebate in compressive quality of the Concrete as a result of the consideration of elastic Aggregates. yet this could constrain its utilization in some auxiliary applications, it has hardly any alluring attributes like lower thickness, higher effect opposition, expanded versatility, and a little increment in flexural quality inside the lower compressive quality Concrete classifications. the outcomes demonstrate that its capability to utilize reused elastic tires in Concrete development as a halfway swap for coarse Aggregates. no different, the extent of substitution should be confined to a minor amount and furthermore the application should be limited to express cases any place the improved properties due to the elastic Aggregates zone unit entrancing. 

by Anuj Nehra | Er. Nitin Thakur "A Research on Study the Behaviour of Concrete using Waste Tires Chips" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd33447.pdf

Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/33447/a-research-on-study-the-behaviour-of-concrete-using-waste-tires-chips/anuj-nehra

callforpaperlifesciences, lifesciencesjournal, researchpapers

Design of Grid Slab Floor

Grid slab floor are designed for long span structure where no intermediate columns are provided in order to accumulate large public gathering, meeting assembly etc. the design for stable, compatible structure for long term serviceability. the spacing of ribs play an important role in stiffness, deformation of the entire structure the grid are modeled using etabs taking 3 grid of different spaced such as 750mm,1000mm,1250mm are modeled and their results are computed and checked with IS codal provisions by using etabs software. 

by Sudhan N | B S Sureshchandra "Design of Grid Slab/Floor" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd33400.pdf

Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/33400/design-of-grid-slabfloor/sudhan-n

callforpaperchemistry, chemistryjournal, openaccessjournalofchemistry 

Deep Learning Approaches for Information Centric Network and Internet of Things

Technologies are rapidly increasing with additions to them every single day. Cloud Computing and the Internet of Things IoT have become two very closely associated with future internet technologies. One provides a platform to the other for success, the benefits of which could be from computing to processing and analyzing the information to reduce latency for real time applications. However, there are a few IoT devices that do not support on device processing. An alternate solution of this is Edge Computing, where the consumers can witness a close call with the computation and services. In this work, we will be to studying and discussing the application of combining Deep Learning with IoT and Information Centric Networking. A Convolutional Neural Network CNN model, a Deep Learning model, can make the most reliable data available from the complex IoT environment. Additionally, some Deep Learning models such as Recurrent Neural Network RNN and Reinforcement Learning have also integrated with IoT, which can also collect the information from real time applications. 

by Aashay Pawar "Deep Learning Approaches for Information - Centric Network and Internet of Things"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd33346.pdf

Paper Url: https://www.ijtsrd.com/engineering/computer-engineering/33346/deep-learning-approaches-for-information--centric-network-and-internet-of-things/aashay-pawar

internationaljournalsofcomputerscience, callforpapercomputerscience, ugcapprovedjournalsforcomputerscience 

Tuesday, September 22, 2020

Automated License Plate detection and Speed estimation of Vehicle Using Machine Learning Haar Classifier Algorithm

A well ordered traffic management system is required in all types of roads, such as off roads, highways, etc. There has been several laws and speed controlled measures are taken in all places with different perspectives. Also Speed limit may vary from road to road. So there are number of methods has been proposed using computer Vision and machine learning algorithms for object tracking. Here vehicles are recognized and detected from the videos that taken using surveillance camera. The aim is to identification of the vehicles and tracking using Haar Classifier, then determine the speed of the vehicle and Finally Detecting the License plate of the vehicle. Detecting the License plate and vehicle speed using machine learning is tough but beneficial task. For the past few years Convolution Neural Network CNN has been widely used in computer vision for vehicle detection and identification. Dlibs are used to track the multiple objects at the same time. 

by P. Devi Mahalakshmi | Dr. M. Babu "Automated License Plate detection and Speed estimation of Vehicle Using Machine Learning - Haar Classifier Algorithm" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd33395.pdf

Paper Url: https://www.ijtsrd.com/engineering/computer-engineering/33395/automated-license-plate-detection-and-speed-estimation-of-vehicle-using-machine-learning--haar-classifier-algorithm/p-devi-mahalakshmi

peerreviewedjournals, reviewpapers, callforpaperhealthscience

Maximizing Output Power of a Solar Panel via Combination of Sun Tracking and Maximum Power Point Tracking

nergy is the basic needs for human comforts and day to day activities. Energy is the key factor for social and economic developments in today scenario. Now a day’s global warming is the main problem of developing counties, due to the nonstop combustion of fossil fuels all over the world, creating environmental hazards and reducing conventional energy sources. This scenario is contributing to the need to search for an new renewable source of energy, which is clean and available in excess. Due to the huge impetus in the government policies on the development of solar energy, it is acting as a main alternative renewable energy source. The solar energy is popular due to easy maintenance, cleanliness, sustainability, and zero noise characteristics. Therefore, Photo Voltaic module supplying loads with and without Maximum Power Point Technique MPPT is applied in the current studies to find the best results. Since the Photovoltaic array output is known to be affected by radiation of sun and temperature, which makes is compulsory to find out an effective method to draw out maximum power from Photo Voltaic cell modules. In my work, Perturb and Observe PandO algorithm is selected because of its easy implementation Solar energy is the clean and eternal source of energy till the end of the world. In this paper main focus is how to improve the efficiency of solar based power generation .Solar energy is variable depends upon the time and the atmospheric condition and hence output of the solar cell is directly proportional to the insulation level and inversely proportional to cell temperature and also the cell never operates at maximum power. 

by Bhoopendra Kumar Rajput | Ameen Uddin Ahmad "Maximizing Output Power of a Solar Panel via Combination of Sun Tracking and Maximum Power Point Tracking" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd33406.pdf

Paper Url: https://www.ijtsrd.com/engineering/electrical-engineering/33406/maximizing-output-power-of-a-solar-panel-via-combination-of-sun-tracking-and-maximum-power-point-tracking/bhoopendra-kumar-rajput

ugcapprovedjournalswithlowpublicationfees, conferenceissuepublication