A Research on Study the Behaviour of Concrete using Waste Tires Chips

Concrete is one in all the principal wide utilized development materials in the world. Regular assets rises a developing worry for shielding the environmental factors and a need to save common assets, by different material which territory unit reused or waste materials during this examination, an investigation was applied on the work of reused elastic tires as a fractional substitution for coarse Aggregates in Concrete development utilizing provincially reachable waste tires. In the principal a piece of this proposal, the foundation of the investigation The examination was applied by leading tests on the Waste materials to see their properties and reasonableness for the analysis. Concrete Was prepared comprising of 3 Concrete evaluations M20 and M25 . The examples were made with extent substitutions of the coarse blend by ten, twenty five and fifty endeavor elastic blend. Besides, an orientation join with no substitution of the coarse blend was made to make a similar examination. The arrangements of tests led are droop, unit weight, compressive quality, lastingness, sway obstruction and flexural quality tests. the data collection was predominantly upheld the tests led on the prepared examples inside the research center. The check results were contrasted and the few run of the mill Concrete properties and show that theres a rebate in compressive quality of the Concrete as a result of the consideration of elastic Aggregates. yet this could constrain its utilization in some auxiliary applications, it has hardly any alluring attributes like lower thickness, higher effect opposition, expanded versatility, and a little increment in flexural quality inside the lower compressive quality Concrete classifications. the outcomes demonstrate that its capability to utilize reused elastic tires in Concrete development as a halfway swap for coarse Aggregates. no different, the extent of substitution should be confined to a minor amount and furthermore the application should be limited to express cases any place the improved properties due to the elastic Aggregates zone unit entrancing. 

by Anuj Nehra | Er. Nitin Thakur "A Research on Study the Behaviour of Concrete using Waste Tires Chips" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd33447.pdf

Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/33447/a-research-on-study-the-behaviour-of-concrete-using-waste-tires-chips/anuj-nehra

callforpaperlifesciences, lifesciencesjournal, researchpapers

Design of Grid Slab Floor

Grid slab floor are designed for long span structure where no intermediate columns are provided in order to accumulate large public gathering, meeting assembly etc. the design for stable, compatible structure for long term serviceability. the spacing of ribs play an important role in stiffness, deformation of the entire structure the grid are modeled using etabs taking 3 grid of different spaced such as 750mm,1000mm,1250mm are modeled and their results are computed and checked with IS codal provisions by using etabs software. 

by Sudhan N | B S Sureshchandra "Design of Grid Slab/Floor" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd33400.pdf

Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/33400/design-of-grid-slabfloor/sudhan-n

callforpaperchemistry, chemistryjournal, openaccessjournalofchemistry 

Deep Learning Approaches for Information Centric Network and Internet of Things

Technologies are rapidly increasing with additions to them every single day. Cloud Computing and the Internet of Things IoT have become two very closely associated with future internet technologies. One provides a platform to the other for success, the benefits of which could be from computing to processing and analyzing the information to reduce latency for real time applications. However, there are a few IoT devices that do not support on device processing. An alternate solution of this is Edge Computing, where the consumers can witness a close call with the computation and services. In this work, we will be to studying and discussing the application of combining Deep Learning with IoT and Information Centric Networking. A Convolutional Neural Network CNN model, a Deep Learning model, can make the most reliable data available from the complex IoT environment. Additionally, some Deep Learning models such as Recurrent Neural Network RNN and Reinforcement Learning have also integrated with IoT, which can also collect the information from real time applications. 

by Aashay Pawar "Deep Learning Approaches for Information - Centric Network and Internet of Things"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd33346.pdf

Paper Url: https://www.ijtsrd.com/engineering/computer-engineering/33346/deep-learning-approaches-for-information--centric-network-and-internet-of-things/aashay-pawar

internationaljournalsofcomputerscience, callforpapercomputerscience, ugcapprovedjournalsforcomputerscience 

Automated License Plate detection and Speed estimation of Vehicle Using Machine Learning Haar Classifier Algorithm

A well ordered traffic management system is required in all types of roads, such as off roads, highways, etc. There has been several laws and speed controlled measures are taken in all places with different perspectives. Also Speed limit may vary from road to road. So there are number of methods has been proposed using computer Vision and machine learning algorithms for object tracking. Here vehicles are recognized and detected from the videos that taken using surveillance camera. The aim is to identification of the vehicles and tracking using Haar Classifier, then determine the speed of the vehicle and Finally Detecting the License plate of the vehicle. Detecting the License plate and vehicle speed using machine learning is tough but beneficial task. For the past few years Convolution Neural Network CNN has been widely used in computer vision for vehicle detection and identification. Dlibs are used to track the multiple objects at the same time. 

by P. Devi Mahalakshmi | Dr. M. Babu "Automated License Plate detection and Speed estimation of Vehicle Using Machine Learning - Haar Classifier Algorithm" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd33395.pdf

Paper Url: https://www.ijtsrd.com/engineering/computer-engineering/33395/automated-license-plate-detection-and-speed-estimation-of-vehicle-using-machine-learning--haar-classifier-algorithm/p-devi-mahalakshmi

peerreviewedjournals, reviewpapers, callforpaperhealthscience

Maximizing Output Power of a Solar Panel via Combination of Sun Tracking and Maximum Power Point Tracking

nergy is the basic needs for human comforts and day to day activities. Energy is the key factor for social and economic developments in today scenario. Now a day’s global warming is the main problem of developing counties, due to the nonstop combustion of fossil fuels all over the world, creating environmental hazards and reducing conventional energy sources. This scenario is contributing to the need to search for an new renewable source of energy, which is clean and available in excess. Due to the huge impetus in the government policies on the development of solar energy, it is acting as a main alternative renewable energy source. The solar energy is popular due to easy maintenance, cleanliness, sustainability, and zero noise characteristics. Therefore, Photo Voltaic module supplying loads with and without Maximum Power Point Technique MPPT is applied in the current studies to find the best results. Since the Photovoltaic array output is known to be affected by radiation of sun and temperature, which makes is compulsory to find out an effective method to draw out maximum power from Photo Voltaic cell modules. In my work, Perturb and Observe PandO algorithm is selected because of its easy implementation Solar energy is the clean and eternal source of energy till the end of the world. In this paper main focus is how to improve the efficiency of solar based power generation .Solar energy is variable depends upon the time and the atmospheric condition and hence output of the solar cell is directly proportional to the insulation level and inversely proportional to cell temperature and also the cell never operates at maximum power. 

by Bhoopendra Kumar Rajput | Ameen Uddin Ahmad "Maximizing Output Power of a Solar Panel via Combination of Sun Tracking and Maximum Power Point Tracking" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd33406.pdf

Paper Url: https://www.ijtsrd.com/engineering/electrical-engineering/33406/maximizing-output-power-of-a-solar-panel-via-combination-of-sun-tracking-and-maximum-power-point-tracking/bhoopendra-kumar-rajput

ugcapprovedjournalswithlowpublicationfees, conferenceissuepublication

A Research on study Behaviour of Concrete by Partial Replacement of Cement with Metakaolin and GGBS

Concrete has been used as a major construction material for many decades. With the rapid increase in the infrastructure of our country there is a need to upgrade concrete properties by incorporating various materials in the design mix. Hence a lot of research work is being carried out for this purpose. There is nascent concern in the use of supplementary cementing material as production of binary and ternary concrete matrices. This study presents the effect of incorporating Metakaolin MK and Silica Fumes SF on strength parameter of ternary pavement concrete blending cement CEM with Ground Granulated Blast Furnace Slag GGBS for a constant water binder ratio of 0.33. Twenty two mixtures prepared by replacing of cement with GGBS 20 , 40 , and 60 , SF 10 , 15 , and 20 and MK 10 , 15 , and 20 were designed for target strength 48 Mpa. From the results, it was observed that 45 replacement of cement with GGBS in binary blend concrete Cement GGBS show optimum level in terms of compressive strength at 28 days and also 56 days, beyond the 45 replacement level strength decreases. In ternary blend concrete mix S40MK15 CEM 40 , GGBS 40 andamp MK 15 and S40SF15 CEM 40 , GGBS 40 andamp SF 15 shows the optimum strength. Splitting tensile strength and flexural strength values have also followed the same trend. Finally this study concludes that the ternary concrete blends cement with 40 GGBS and 15 MK show the desired properties which is almost equal as compared to the ternary concrete blends cement with 40 GGBS and 15 SF. Hence both of these mixes can be used economically depending upon their availability. 

by Antim | Er Gaurav Tanwar "A Research on study Behaviour of Concrete by Partial Replacement of Cement with Metakaolin and GGBS" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd33420.pdf

Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/33420/a-research-on-study-behaviour-of-concrete-by-partial-replacement-of-cement-with-metakaolin-and-ggbs/antim

ugclistedjournals, indexedjournal, paperpublication

A Review on Study the Behaviour of Concrete using Waste Tires Chips

Concrete is one in all the principal wide utilized development materials in the world. Regular assets rises a developing worry for shielding the environmental factors and a need to save common assets, by different material which territory unit reused or waste materials during this examination, an investigation was applied on the work of reused elastic tires as a fractional substitution for coarse Aggregates in Concrete development utilizing provincially reachable waste tires. In the principal a piece of this proposal, the foundation of the investigation The examination was applied by leading tests on the Waste materials to see their properties and reasonableness for the analysis. Concrete Was prepared comprising of 3 Concrete evaluations M20 and M25 . The examples were made with extent substitutions of the coarse blend by ten, twenty five and fifty endeavor elastic blend. Besides, an orientation join with no substitution of the coarse blend was made to make a similar examination. The arrangements of tests led are droop, unit weight, compressive quality, lastingness, sway obstruction and flexural quality tests. the data collection was predominantly upheld the tests led on the prepared examples inside the research center. The check results were contrasted and the few run of the mill Concrete properties and show that theres a rebate in compressive quality of the Concrete as a result of the consideration of elastic Aggregates. yet this could constrain its utilization in some auxiliary applications, it has hardly any alluring attributes like lower thickness, higher effect opposition, expanded versatility, and a little increment in flexural quality inside the lower compressive quality Concrete classifications. the outcomes demonstrate that its capability to utilize reused elastic tires in Concrete development as a halfway swap for coarse Aggregates. no different, the extent of substitution should be confined to a minor amount and furthermore the application should be limited to express cases any place the improved properties due to the elastic Aggregates zone unit entrancing. 

by Anuj Nehra | Er. Nitin Thakur "A Review on Study the Behaviour of Concrete using Waste Tires Chips" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd33419.pdf

Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/33419/a-review-on-study-the-behaviour-of-concrete-using-waste-tires-chips/anuj-nehra

ugcjournallist, listofugcapprovedjournals, researchpublication