A Review on Sweat as a Source of Future Digital Biomarkers

 Sweat has been related to health and malady ever since it had been joined to high body temperature and exercise. It contains a broad vary of electrolytes, proteins, and lipids, and thus hosts a broad panel of potential non invasive biomarkers. The event of novel smart phone based biosensors can modify a lot of subtle, patient driven sweat analysis. This can offer a broad vary of novel digital biomarkers. Digital biomarkers are of skyrocketing interest as a result of they deliver numerous relevant longitudinal health information. To date, investigations on digital biomarkers have targeted on making objective measurements of function. Sweat analysis victimisation smart phone based biosensors has the potential to produce initial non invasive metabolic feedback and so represents a promising complement and a supply for next generation digital biomarkers. From this viewpoint, we have a tendency to discuss state of the art sweat analysis, that specialize in the clinical implementation of sweat in medication. Sweat provides biomarkers that represent direct metabolic feedback and is thus expected to be future generation of digital biomarkers. 

by Farjees Fathima A | Shafinaz Filwa S "A Review on Sweat as a Source of Future Digital Biomarkers" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd31791.pdf 

Paper Url :https://www.ijtsrd.com/engineering/bio-mechanicaland-biomedical-engineering/31791/a-review-on-sweat-as-a-source-of-future-digital-biomarkers/farjees-fathima-a

callforpaperpharmacy, pharmacyjournal, internationalpeerreviewedjournal

Mechanical Characteristics of Cement Mortar Manufactured with WPS Ash and PF as Partial Replacement for Cement and Sand

The Waste discharged from paper mill is generally producing environmental issues, like, air and land pollution and land pollution. Therefore, it is planned to utilize the paper sludge in the form of ash after burning at high temperature in the incinerator for the replacement of cement and sand in cement mortar. In this research works, it is suggested to investigate mechanical characteristic of the cement mortar containing paper sludge. On the basis of the results obtained by conducting several tests, it is concluded that when the sand and cement replaced by the PS, the cube compressive strength, prism flexural strength and splitting tensile strength of cement mortar is gradually decreasing by increasing the percentage of waste paper sludge ash. It is also observed that, it is increasing when the cement mortar is incorporated with Polypropylene Fibre. 

by R. Murugaboopathy "Mechanical Characteristics of Cement Mortar Manufactured with WPS Ash and PF as Partial Replacement for Cement and Sand" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd32979.pdf 

Paper Url :https://www.ijtsrd.com/engineering/civil-engineering/32979/mechanical-characteristics-of-cement-mortar-manufactured-with-wps-ash-and-pf-as-partial-replacement-for-cement-and-sand/r-murugaboopathy

ugcapprovedmanagementjournal, openaccessjournalofmanagement, paperpublicationinmanagement

A Review on User Grouping Based Two Phase Transmission Protocol for Achieving Ultra Reliability in Wireless Factory Automation

his framework expects to create correspondence methods for making a change in perspective from customary human type broadband communications to the rising machine type Ultra reliable and low latency communication URLLC for factory automation. One central assignment for URLLC is to convey short messages from a controller to a group of actuators within less delay and with high reliability. Persuaded by the production line robotization setting in which errands are appointed to group of devices that work close to one another in this way can create clusters of device to device D2D networks, this proposes a novel two phase transmission protocol for accomplishing URLLC. Here grouping is done based on geographic location of users. In the first phase, within the latency availability, the multi antenna base stations BS bring together all the messages of all devices within every group and send them to the respective groups. In the second phase, the devices that have decoded the messages effectively, in this called as leaders help transfer the messages to other devices in the same group. The proposed technique prompts an ideal sparsity design in user action with at most one leader can receive the message within each group in the first phase, thus achieving reliability and providing D2D transmissions in the second phase. 

by Hiba Abdul Rahman | Sribi. M. P "A Review on User Grouping Based Two Phase Transmission Protocol for Achieving Ultra Reliability in Wireless Factory Automation" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd31803.pdf 

Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/31803/a-review-on-user-grouping-based-two-phase-transmission-protocol-for-achieving-ultra-reliability-in-wireless-factory-automation/hiba-abdul-rahman

callforpaperchemistry, chemistryjournal, openaccessjournalofchemistry 

Effect of Urea on the Production of Chitinase by Trichoderma Viride

Trichoderma spp. is proved to be an efficient bio control agent. It is one of the most frequently studied genera in relation to biological control of plant diseases. The bio control activity of Trichoderma spp depends on the production of large number of hydrolytic enzymes. Trichoderma spp. produces variety of antimicrobial substances or biologically active substances those are inhibitory to plant pathogens. Trichoderma is one of the groups of beneficial fungi, that have been shown to act, and are commercially applied as biocontrol agents against fungal pathogens. Trichoderma Biocontrol agents can even exert positive effects on plants with an increase in plant growth and also in the stimulation of plant defense mechanism. Urea did not show any negative impact on the growth of Trichoderma viride. Trichoderma viride cannot be applied to crops along with fungicides or insecticides. While applying chemical fertilizers, care maybe taken by avoiding the place and time of application of both. 

by Dr. Noha Laj | Abhinsha Z "Effect of Urea on the Production of Chitinase by Trichoderma Viride" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd31786.pdf 

Paper Url :https://www.ijtsrd.com/biological-science/microbiology/31786/effect-of-urea-on-the-production-of-chitinase-by-trichoderma-viride/dr-noha-laj

callforpapermathematics, mathematicsjournal, ugcapprovedjournalsinmathemetics

Study of Effectiveness of Various Promotional Strategies used by Honda

HONDAs key strategies are to build a sturdy product portfolio across categories. Explore growth possibilities globally, continuously improve its operational efficiency, aggressively extend its attain to customers, maintain to spend money on brand building activities and make certain customer and shareholder delight. Honda Has to be upgraded so that it reaches to the mass..Current Market fashion in quarter of cars Needs few Improvement in order that it reaches to the corners of the nation. New product launch must be able to attract it’s buyer through various beneficial scheme, so that people show promptness in shopping for the product. Promotional elements of Honda may be very much effective as it promotes in regional languages too but charges must be reasonable for not unusual people.

by Neha Gakhare | Mayur S. Raut | Mayur Y. Ghagre "Study of Effectiveness of Various Promotional Strategies used by Honda" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd31796.pdf 

Paper Url :https://www.ijtsrd.com/management/marketing/31796/study-of-effectiveness-of-various-promotional-strategies-used-by-honda/neha-gakhare

ugcapprovedmanagementjournal, openaccessjournalofmanagement, paperpublicationinmanagement

Factors Affecting Job Satisfaction and Productivity of Sewing Line Workers A Study on Selected Readymade Garment Industries in Myanmar

A basic requirement for job satisfaction among sewing line workers is a working environment that allows workers to perform their work at an optimal level in a comfortable environment. The working environment plays an essential role in workers job satisfaction and the impact of job satisfaction on productivity. A causal study was conducted to examine the impact of the working environment on job satisfaction and productivity of workers in the garment manufacturing industries. In this study, six factors of the work environment were considered for job satisfaction, which are, working conditions, remuneration, job security, psychosocial work environment, ergonomics and work participation. Data was collected from four readymade garment industries in Myanmar using random sampling. Multiple regression analysis and simple linear regression were used to predict the correlation. Based on the finding, this study showed that working conditions, remuneration and psychosocial work environment have strong casual effect on workers’ job satisfaction and job security and ergonomics are moderate and work participation is low casual effect on workers’ job satisfaction.

 

by Aung Myo Lwin | Yin Yin Tun "Factors Affecting Job Satisfaction and Productivity of Sewing Line Workers: A Study on Selected Readymade Garment Industries in Myanmar" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd32974.pdf 

Paper Url :https://www.ijtsrd.com/engineering/industrial-engineering/32974/factors-affecting-job-satisfaction-and-productivity-of-sewing-line-workers-a-study-on-selected-readymade-garment-industries-in-myanmar/aung-myo-lwin

openaccessjournalofengineering, engineeringjournal, paperpublicationforengineering

Design and Implementation of Low Power Adiabatic System for Power Recycling in Frequency Divider

Frequency divider to generate a frequency that is a multiple of a reference frequency. The latch based frequency divider are cascaded the two static differential sense amplifier pulsed latch SSA SPL with body biasing techniques. The operation of this type divider is to reduce power, delay and transistor size. The Adiabatic techniques dramatically reduce power consumption. This paper presents ECRL Efficient Charge Recovery Logic latch based frequency divider, which provides a contentment achievement. The architecture is combined two latches with feedback. Thus, frequency division is done. The circuit designed and simulation can be done in TANNER EDA. 

by K. Mahalakshmi | S. Jabeentaj | V. Kaviyamalai | Mr. R. Thirumurugan "Design and Implementation of Low Power Adiabatic System for Power Recycling in Frequency Divider" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd32953.pdf 

Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/32953/design-and-implementation-of-low-power-adiabatic-system-for-power-recycling-in-frequency-divider/k-mahalakshmi

peerreviewedjournals, reviewpapers