Experimental Study on High Performance Concrete by using Partial Replacement of Copper Slag and Fly Ash

The conventional concrete has lost its usage nowadays as it does not set out the present need. The term ‘High Performance’ is because of the essential usage, materials and proportions of this concrete are specifically chosen for properties such as high workability, high density and low permeability. The main objective of this study is to deal with the effects of cementitious materials in High Performance Concrete HPC for mix design of M40 grade concrete. Hence, copper slag which is the industrial by product is used as a partial replacement of fine aggregate by 0 , 15 , 30 , 45 , 60 and 75 with 20 of fly ash by the volume of cement with water cement ratio 0.36. Super plasticizer conplast SP430 is used as chemical admixture at the rate of 1.2 of cement which improves the workability. From this experimental study, so far the utilization of copper slag and fly ash observed with gradual improvement in mechanical properties such as compressive, split tensile and flexural strength in HPC. By evaluating the optimum percentage of copper slag, 

by J. Grijasri | U. Karunya | A. Thomas Eucharist ""Experimental Study on High Performance Concrete by using Partial Replacement of Copper Slag and Fly Ash""

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-3 , April 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd30460.pdf

Paper Url :https://www.ijtsrd.com/engineering/structural-engineering/30460/experimental-study-on-high-performance-concrete-by-using-partial-replacement-of-copper-slag-and-fly-ash/j-grijasri

openaccessjournalofengineering, engineeringjournal, paperpublicationforengineering

Behaviour of Glass Fiber Reinforced Polymer Composite in Flexure Shear Strength of Reinforced Concrete Beams

The corrosion of steel reinforcement in concrete reduces the life of structures, causes high repair costs and can endanger the structural integrity of the structure itself. Glass fibre reinforced polymer GFRP offers a number of advantages over steel especially when used in marine and other salt laden environments. GFRP reinforcing bars are gradually finding wider acceptance as a replacement for conventional steel reinforcement as it offers a number of advantages. Technical studies on a number of concrete structures, from five to eight years old and constructed with GFRP reinforcement, have shown that there is no degradation of the GFRP from the alkaline environment. Concrete is very strong in compression but it is extremely weak in tension. To resist the tensile stress, steel reinforcement is provided in concrete. Reinforcement corrosion and structural deterioration in reinforced concrete structures are common, and prompted many researchers to seek alternative materials and rehabilitation techniques. One such material that has been offered as an alternative to mild steel reinforcement is Glass Fibre Reinforced Polymer GFRP bars and flats. For the repair and strengthening of structural concrete members, strengthening with Glass Fibre Reinforced Polymer GFRP plates is an excellent option. The present work is to study the behavior of Shear resistance of the silica coated GFRP stirrups in the shear test zone. A series of studies were conducted using silica coated GFRP stirrups in shear zone. It is observed that beams with silica coated GFRP flats shear reinforcement have shown failure at higher loads than the theoretical failure loads. Further it is observed that GFRP flats as shear reinforcement exhibit fairly good ductility. 

Er. Satish Kumar | Mr. Ajit Singh ""Behaviour of Glass Fiber Reinforced Polymer Composite in Flexure Shear Strength of Reinforced Concrete Beams""

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-3 , April 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd30440.pdf

Paper Url :https://www.ijtsrd.com/engineering/civil-engineering/30440/behaviour-of-glass-fiber-reinforced-polymer-composite-in-flexure-shear-strength-of-reinforced-concrete-beams/er-satish-kumar

callforpaperlanguages, languagesjournal, bestjournal

Necessity of Internet of Things in Smart Grid

Aim of this paper is to gives the overview of the importance of deployment of Internet of Things in Smart Grid so that available power from the grid can be efficiently managed. Also, this paper covers the application of IoT in three levels of generation, transmission and distribution. Besides, it explains about implementation of IoT in renewable energy sources. This paper also describes simulation of single phase AC micro grid in MATLAB Simulink to understand the importance of IoT implementation. 

Piyush Pratik | Dr. Anitha G. S. ""Necessity of Internet of Things in Smart Grid""

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-3 , April 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd30690.pdf

Paper Url :https://www.ijtsrd.com/engineering/electrical-engineering/30690/necessity-of-internet-of-things-in-smart-grid/piyush-pratik

callforpaperlifesciences, lifesciencesjournal, researchpapers

Overview of Cyborg Technology

In this research paper we will focus on the cyborg technology in cybernetic. Cyborg in cybernetic is a part of Artificial Intelligence AI . Artificial Intelligence is area of computer science that deals with the creation of intelligent machines or software that work and react like a human being. Cybernetic is the basic science of control system and communication in both areas that cover machines as well as living things. This paper will mainly be focusing on how Cybernetics and Artificial Intelligence work together. This paper will also include evaluation of cyborg technology in real world, benefits, drawbacks of cyborg technology and how cyborgs are different from robots. 

Aayush Mehta | Jai Sharma | Dr. Deepak Chahal ""Overview of Cyborg Technology""

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-3 , April 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd30755.pdf

Paper Url :https://www.ijtsrd.com/engineering/computer-engineering/30755/overview-of-cyborg-technology/aayush-mehta

callforpaperbiologicalscience, biologicalsciencejournal

An Experimental Investigation on Concrete with Copper Slag using Corrosion Resistance Techniques

Now a days, the application of waste material usage in building materials has increased effectively. Copper slag is a by product created during the copper smelting and refining process. This material represents a popular alternative to sand. Natural sand is used from river bed for all construction stage. Decreasing natural resources create the environmental issues and hence restriction on sand resulted in scarcity and increased in its cost. After long investigation industries and investigator all over the world to explore the possible utilization of copper slag. This paper mainly shows the corrosion in concrete by using copper slag and preventive measures from corrosion. In this project M30 grade of concrete is used. Two different types of corrosion inhibitors were used calcium nitrate and concare . The influence of copper slag on concrete was investigated with respect to the properties of concrete in the fresh state workability and hardened state mechanical properties and durability . Strength properties of concrete increased 40 replacement of fine aggregate by using copper slag. However further addition of copper slag caused reduction in strength. From chemical composition of copper slag Fe2O3 present in more than 55 . So that here concrete itself getting corrode. Here corrosion inhibitors at the amount of 1 , 2 and 3 by the weight of cement in concrete having copper slag as a fine aggregate is used. Effect of this inhibitor was derived from gravimetric method. 

P. Nithya | K. Soundhirarajan ""An Experimental Investigation on Concrete with Copper Slag using Corrosion Resistance Techniques""

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-3 , April 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd30548.pdf

Paper Url :https://www.ijtsrd.com/engineering/civil-engineering/30548/an-experimental-investigation-on-concrete-with-copper-slag-using-corrosion-resistance-techniques/p-nithya

callforpaperpapersinjournals, multidisciplinaryjournal

Wireless Charging Solution of Mobile Phone Batteries using Microwaves via Cellular Communication

In todays era, mobile phones have become a basic part of our day to day lives and their phone side to excessive use of mobile phones leads to early drainage of mobile phones batteries which have been a great issue. The mobile talk time and battery stand by varies in every mobile phone and it depends upon its battery manufacturer. This proposes mid to facilitate the recharging of mobile batteries easily to the extent that the phone battery will get recharge wireless via cellular communication. This means that whenever the user is on call, the phone will charge automatically. This technology is an application of RF energy harvesting. Since the availability of RF energy in our surroundings is abundant. In earlier times too, it was a belief that wireless charging replaces wires and cables like how Bluetooth and Wi Fi have modernized personal communication. The prevailing methods of wireless charging highly depend upon the concept of inductive and resonance coupling using the electromagnetic field that transfers energy from the transmitter to the receiver. The main focus of this proposed solution is to design a system that recharges the mobile phone batteries via cellular communication and independent of their battery manufacturer and type of cables and wires used for a particular USB port. This entire process is done by the employment of microwaves and RF energy harvesting in an eco friendly way. The microwave signal is transmitted from the high power microwave generator Magnetor which acts as a transmitter with the help of a slotted waveguide antenna and transmits the power along with the message signal at a frequency up to 2.45GHz. With this advancement, there is some minimal addition to the hardware design of the mobile handset. It includes the addition of a Rectenna which is a mesh network of rectifying diode, rectifying filter, and sensor circuitry. Further, the advantages, limitations and drawbacks and future improvements associated with wireless charging of mobile phones are discussed in this paper. 

Ruchika Sharma | Manisha Kumawat ""Wireless Charging Solution of Mobile Phone Batteries using Microwaves via Cellular Communication""

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-3 , April 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd30575.pdf

Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/30575/wireless-charging-solution-of-mobile-phone-batteries-using-microwaves-via-cellular-communication/ruchika-sharma

callforpaperchemistry, chemistryjournal, openaccessjournalofchemistry 

IoT Based Smart Washroom using Automated Sensor

In the contemporary world, the technologies are sharply developed, but still the hygiene in our country is under hazards. The abstract of project is to provide clean and hygienic toilets or washrooms. All the public toilets should be clean and hygienic means disease free. In our country, government has introduced the scheme called “Swachh Bharat” Clean India so keeping the toilets clean is the one of the objective of Clean India Scheme. Our proposed solution can contribute to raise the clean India project. In future, it can play the major role in Clean India scheme. The existing system focus on detecting the dirt in the toilets. In our proposed system, we have focus on keeping clean toilets, observing the sweeper’s working activities. It can avoid many diseases and may create the awareness among people about the Toilet management. Therefore, our solution is used to have safe and hygienic toilets. The proposed system is based on IOT and using different sensors like smell sensor, IR sensor, ultra sonic sensor, RFID reader. By using these sensors, we can create the smart toilets. 

Ms. Nayana B. Chide | Mr. Nilesh P. Bobade ""IoT Based Smart Washroom using Automated Sensor""

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-3 , April 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd30544.pdf

Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/30544/iot-based-smart-washroom-using-automated-sensor/ms-nayana-b-chide

callforpaperbiologicalscience, biologicalsciencejournal