To Study the Properties of Concrete with Partial Replacement of Aggregates by Waste Plastic

Solid waste management is among the key environmental issues in India. The current research applies to the usage of or even recycled plastics as an alternative for rough aggregates in concrete. The primary goal of the analysis is to investigate the modification in the physical attributes of concrete by the inclusion of plastics to concrete. In addition to the physical qualities, winter qualities of the ensuing concrete may also be analyzed. The utilization of plastic aggregates was discovered to lead to the development of sturdy concrete. Additionally, with the plastics, the tensile and compressive strength of the concrete reduces. The foremost change brought approximately by using plastics is the fact that concrete's thermal conductivity is decreased due to the utilization of plastics. It is able to thus be declared recycled plastics are usually utilized for thermal insulation of structures. Series of experiments had been performed in this current study for a comparison of the usage of Used Plastic as a replacement of sand in various different proportions. The main conclusions drawn was that the compressive strength increases with the inclusion of Used Plastic upto a certain proportions and then reduces the strength. 

by Monu | Er Sumesh Jain "To Study the Properties of Concrete with Partial Replacement of Aggregates by Waste Plastic"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29874.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/29874/to-study-the-properties-of-concrete-with-partial-replacement-of-aggregates-by-waste-plastic/monu

submit paper online, international journals in engineering, engineering journal

To Study the Behaviour use of Locally Materials in Highway Subgrade

Concrete is strong in compression but weak in tension and brittle also. Cracks also start forming as soon as the concrete is placed. These above said drawbacks don't permit the use of normal concrete in pavements as they lead to a lack of ductility along with fracture and failure. These weaknesses in concrete can be mitigated by using fibers as reinforcement in the concrete mix. Waste materials in the form of polyethylene and tires cause environmental pollution which leads to various health problems. Polyethylene and waste tires can be reused and used efficiently in the concrete as reinforcement in the fiber form. Polyethylene is a synthetic hydrocarbon polymer which can improve the ductility, strength, shrinkage characteristics. This study deals with the effects of addition of polyethylene fiber on the properties of concrete. In this study, Polyethylene and tire fibers were cut into the size of 25mm x 8mm and they were used 1.5 each by volume. Grades of concrete used were M 30, M 35 and M 40. IRC 44 2008 was followed for the design of concrete mix. In this study, the results of the strength properties of Polyethylene fiber reinforced concrete have been presented. Four point bending and double shear test were performed in the laboratory for flexure and shear strength determinations. There was seen an increase of 18 in the 28 day compressive strength along with an increase of 39 in flexure Strenght and 32 in shear strength. It is also found that 22 reduction in the four point bending test and 36 reduction in deflection by double shear tests were initiated out from the experiments. Theoretical analysis of deflection was carried out with the help of energy methods. Practical values were verified with the theoretical values within the allowable limits. Finally, it is concluded that polyethylene and tire used efficiently in reinforced cement concrete. 

by Amit Kumar Bhobria | Er Nitin Thakur "To Study the Behaviour use of Locally Materials in Highway Subgrade"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29873.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/29873/to-study-the-behaviour-use-of-locally-materials-in-highway-subgrade/amit-kumar-bhobria

ugc approved journals for engineering, manuscript submission, paper publication for engineering

Turkish Natural Language Processing Studies

Natural language processing which is an engineering field which is concerned with the design and implementation of computer systems whose main function is to analyze, understand, interpret and produce a natural language. Literature review was conducted using Turkish natural language studies documentation method. Documentation on the current method of examination to be reliable scientific research and thesis studies on natural language processing in Turkey were examined by scanning pages of the thesis of Higher Education. Evaluated in terms of the subjects of the study samples obtained as a result of the literature review Morphological analysis studies, syntactic analysis studies, semantic analysis studies and problem analysis criteria were determined and pr

esented.

BY Yilmaz Ince, E "Turkish Natural Language Processing Studies"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29831.pdf 

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/29831/turkish-natural-language-processing-studies/yilmaz-ince-e

international journals in engineering, engineering journal, conference issue publication

Paper Battery

The Batteries form a significant part of many electronic devices. Typical electrochemical batteries or cells convert chemical energy into electrical energy. Batteries based on the charging ability are classified into primary and secondary cells. Secondary cells are widely used because of their rechargeable nature. Presently, battery takes up a huge amount of space and contributes to a large part of the devices weight. There is strong recent interest in ultrathin, flexible, safe energy storage devices to meet the various design and power needs of modern gadgets. New research suggests that carbon nanotubes may eventually provide the best hope of implementing the flexible batteries which can shrink our gadgets even more. The paper batteries could meet the energy demands of the next generation gadgets. A paper battery is a flexible, ultra thin energy storage and production device formed by combining carbon nanotubes with a conventional sheet of cellulose based paper. A paper battery acts as both a high energy battery and super capacitor, combining two components that are separate in traditional electronics. This combination allo

ws the battery to provide both long term, steady power production and bursts of energy. Nontoxic, flexible paper batteries have the potential to power the next generation of electronics, medical devices and hybrid vehicles, allowing for radical new designs and medical technologies. The various types of batteries followed by the operation principle, manufacturing and working of paper batteries are discussed in detail.

BY M. Srikanth | P. Yaswanth Kumar | K. Vijetha "Paper Battery"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29836.pdf  

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/29836/paper-battery/m-srikanth

submit paper online, international journals in engineering, engineering journal

A Comparative Overview on the Horizontal Axis and the Vertical Axis wind Turbines

Wind energy is a renewable and non conventional source of power generation. It is a clean source of energy with a minimum to zero pollution and thus prevents the environment from deteriorating. The wind energy generation is a giant step towards sustainable development and its usage increases day by day due to lack of fossil fuels. Since India is among the fastest growing country in terms of wind energy generation, it is planning for the installation of 175 GW power capacity by financial year 2022. Wind vitality is produced through wind turbines, wind turbines are likewise called as wind vitality convertors and they convert the dynamic vitality of wind into the mechanical vitality that can be utilized for crushing grains, siphoning water, and so fort

h or this active vitality can be changed over into electrical vitality by means of generator. Wind turbines are of two types Vertical axis wind turbines VAWTs and Horizontal axis wind turbines HAWTs . VAWTs are mostly used domestically where power consumption is low and the requirement is of economic rate. HAWTs are more preferably used where power requirement is high and requires high output efficiency. Thus this paper contains a comparison between VAWTs and HAWTs in terms of efficiency, the gearbox mechanism, blade rotation speed, noise, blade rotating space, etc. 

BY Naveen kumar | Syed Fozail Ahmad "A Comparative Overview on the Horizontal Axis and the Vertical Axis wind Turbines"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29697.pdf 

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/29697/a-comparative-overview-on-the-horizontal-axis-and-the-vertical-axis-wind-turbines/naveen-kumar

ugc approved journals for engineering, manuscript submission, paper publication for engineering

Behaviour of Lustrous Carbon Additives in Green Sand Casting

The advent of High Volume, High Density and High Pressure Moulding Lines has changed the logistics of Molding Techniques and selection of additives significantly. Having 4 main ingredients, Base Sand, Bentonite, Lustrous Carbon Additives and Water, the properties of the Sand Mold resulting from this simple mixture to deliver target casting quality is complexly variable. Sand Control is an Art' as any foundry man will willingly emphasize. It is well accepted that no two foundry sand systems are the same. Even a single foundry Unit or foundry group having two or more molding lines, along with separate Sand preparation lines, whether in the same campus or in different locations, sand preparation and sand parameters will normally differ in each sand loop The role of quality in additives has therefore become even more important than when one could feel' the sand and make changes accordingly. Now, additives and ingredients have to be engineered precisely for the application with assured reproducibility in chemistry, grain fineness and other parameters. 

BY Pawan Prakash | Bhasker Shrivastava "Behaviour of Lustrous Carbon Additives in Green Sand Casting"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29807.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/29807/behaviour-of-lustrous-carbon-additives-in-green-sand-casting/pawan-prakash

call for paper engineering, special issue publication, open access journal of engineering

Power Quality Enhancement using DSTATCOM by Immune Feedback Control Algorithm

This paper proposes an immune feedback control algorithm for a three phase distribution static compensator DSTATCOM to mitigate several power quality problems such as harmonics, reactive power, and load unbalancing at distribution level. This control algorithm proposed for DSTATCOM, is validated for maintaining power factor to unity, load balancing, and harmonics reduction of supply currents. In this application, the proposed control algo rithm on a DSTATCOM is implemented for the compensation of nonlinear loads. The simulations were performed in the environment of MATLAB SIMULINK. 

BY P. Thirumala | K. Mahesh "Power Quality Enhancement using DSTATCOM by Immune Feedback Control Algorithm"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29812.pdf

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/29812/power-quality-enhancement-using-dstatcom-by-immune-feedback-control-algorithm/p-thirumala

international journals in engineering, engineering journal, conference issue publication