Artificial Intelligence in Power Station

With increased competitiveness in power generation industries, more resources are directed in optimizing plant operation, including fault detection and diagnosis. One of the most powerful tools in faults detection and diagnosis is artificial intelligence AI . Faults should be detected early so correct mitigation measures can be taken, whilst false alarms should be eschewed to avoid unnecessary interruption and downtime. For the last few decades there has been major interest towards intelligent condition monitoring system ICMS application in power plant especially with AI development particularly in artificial neural network ANN . ANN is based on quite simple principles, but takes advantage of their mathematical nature, non linear iteration to demonstrate powerful problem solving ability. With massive possibility and room for improvement in AI, the inspiration for researching them are apparent, and literally, hundreds of papers have been published, discussing the findings of hybrid AI for condition monitoring purposes. In this paper, the studies of

ANN and fuzzy logic application will be presented.

BY P. Naveen | S. Nikitha | P. Sudeesh | V. Vaishnavi "Artificial Intelligence in Power Station" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29784.pdf  

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/29784/artificial-intelligence-in-power-station/p-naveen

call for paper engineering, special issue publication, open access journal of engineering

Study on Shallow and Deep Bin for a Constant Volume at Same Loading Condition a Review

The bunkers and silos made of reinforced concrete have almost replaced the steel storage structures. Concrete bins possess less maintenance and other architectural qualities greater than steel storage tanks. They are used to store materials like grain, cereals, coal cement etc. They both serve the purpose of bins. 

BY Rahul Patidar | Nitesh Kushwaha "Study on Shallow and Deep Bin for a Constant Volume at Same Loading Condition a Review"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29800.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/29800/study-on-shallow-and-deep-bin-for-a-constant-volume-at-same-loading-condition-a-review/rahul-patidar

submit paper online, international journals in engineering, engineering journal

A Review Study on Comparative Study on Single Web System Truss Tower with Portal System Truss Tower

A transmission tower or power tower alternatively electricity pylon or variations is a tall structure, usually a steel lattice tower, used to support an overhead power line.

BY Ishrat Jahan Siddiqui | Nitesh Kushwaha "A Review Study on Comparative Study on Single Web System Truss Tower with Portal System Truss Tower"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29799.pdf

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/29799/a-review-study-on-comparative-study-on-single-web-system-truss-tower-with-portal-system-truss-tower/ishrat-jahan-siddiqui

ugc approved journals for engineering, manuscript submission, paper publication for engineering

Experimental Investigation of Properties of Concrete with Partial Replacement of Aggregates with Industrial and Construction Waste

Natural resources are depleting worldwide while at the same time the generated wastes from the industry are increasing substantially. The sustainable development for construction involves the use of nonconventional and innovative materials, and recycling of waste materials in order to compensate the lack of natural resources and to find alternative ways conserving the environment. So, this paper presents the results of an experimental investigation carried out to evaluate the mechanical properties of concrete mixtures in which fine aggregate sand was replaced with Copper Slag CS while coarse aggregates was replaced by recycled concrete aggregate RCA from demolished structure. Both the fine and coarse aggregate were replaced with percentages 0 for the control mixture , 10 , 20 , 30 , of Copper Slag by weight. Tests were performed for properties of fresh concrete and hardened Concrete. Slump test was conducted to determine the workability of the various design concrete mix. Compressive strength and split tensile strength were determined at 7, 28 days of curing. The results indicate that workability decreases slightly with increase in Copper Slag percentage, though workability for the sample were within the prescribed limit for M25 concrete. Test results indicate significant improvement in the strength properties of plain concrete by the inclusion of CS alone while a reverse trend in observed for increasing percentage of RCA in the sample. The synergistic effect of CS and RCA on the designed sample concrete revealed that the percentage of CS is the more decisive factors than the percentage of RCA in deciding the performance of the concrete in terms of compressive and tensile strength. The outcomes of this research work showed that Copper slag and recycled concrete aggregate can be effectively used in structural concrete as a replacement of fine aggregate sand and coarse aggregate respectively. Futher, it substantiate towards sustainable construction approach because of its dual advantage of controlling menace of solid waste disposal along with its subsequent environmental pollution and increasing the cost efficiency and carbon efficiency of the product. 

BY Achal Jain | Er Nitin Thakur "Experimental Investigation of Properties of Concrete with Partial Replacement of Aggregates with Industrial and Construction Waste"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29834.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/29834/experimental-investigation-of-properties-of-concrete-with-partial-replacement-of-aggregates-with-industrial-and-construction-waste/achal-jain

call for paper engineering, special issue publication, open access journal of engineering

Brush Less Dc Motor

Permanent Magnet PM Brushless DC BLDC motors have been widely used in industrial drives due to their high performance, high torque density and low acoustic noise. Cogging torque in these motors is caused by the reluctance change between the stator teeth and the rotor magnets. The cogging torque invariably affects the performance of the motor by giving rise to torque ripples, vibration, speed fluctuations and acoustic noise. The main objective of the research work is to explore the design methods to reduce the cogging torque in BLDC motors. This thesis consists of two parts the first part dealing with the reshaping of Rotor Permanent Magnets and the second with the Stator Slot Modifications both for reducing the cogging torque in BLDC motors. All th

e proposed techniques in this thesis have been designed using CAD package MagNet. The Finite Element Analysis FEA is applied to all the proposed design methods and the CAD results are compared for cogging torque reductions.

BY Sd. Salman | T. Rajesh | B. Archana "Brush Less Dc Motor"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29804.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/29804/brush-less-dc-motor/sd-salman

international journals in engineering, engineering journal, conference issue publication

Research into Properties of Spot Welded Steel Sheets

The contribution deals with parameter optimalization of resistance spot welding for hot dip zinc coated steel sheets. The mechanical properties and metallographic observation of welded joints on galvanized steel sheets were performed. Uncoated sheets from the same material were used for comparison of particular properties. The results showed that welding parameter opt

imalization is very important for welding of galvanized steel sheets. 

BY LuboÅ¡ KaÅ¡c¡k | Denis Cmorej "Research into Properties of Spot Welded Steel Sheets" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29773.pdf 

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/29773/research-into-properties-of-spot-welded-steel-sheets/lubo%C5%A1-ka%C5%A1c%C3%A1k

international journals in engineering, engineering journal, conference issue publication

Comparative Study on Analysis and Design of Skew Bridge by STAAD and ETABS Software using Finite Element Method

Skew bridges are required to cross the drains at any angle other than normal. These can be helpful in making straight crossing or utilizing the available land where normal crossing are either impossible or not suitable. The slab bridges are uneconomical for large spans due to excessive design thickness but good for small spans due to its easy execution.Bending Moment result comparison between both software i.e. Staad Pro and Etabs show little variation For Span 15 m on Staad Pro and Etabs is 74.518 kn sq.mm and 68.40kn sq.mm respectively, For Span 17 m on Staad Pro and Etabs is 71.47 kn sq.mm and66.70 kn sq.mm respectively and For Span 19 m on Staa

d Pro and Etabs is 79.73 kn sq.mm and71.95 kn sq.mm respectively. At constant skew angle for varying span length the torsional bending moment gradually shift toward obtuse acute angle. In both the software i.e. STAAD and ETAB the ETAB give more appropriate result in compare to STAAD.

BY Patil Akshay Mukund | Nitesh Kushwaha "Comparative Study on Analysis & Design of Skew Bridge by STAAD and ETABS Software using Finite Element Method"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29788.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/29788/comparative-study-on-analysis-and-design-of-skew-bridge-by-staad-and-etabs-software-using-finite-element-method/patil-akshay-mukund

international journals in engineering, engineering journal, conference issue publication