Design and Construction of GSM Based Fire Alarm System using PIC Microcontroller

A fire alarm system is used our properties safe form fire. It can be designed in many ways in different components. Many expensive building must have their fire alarm systems. In market almost systems are indoor systems. The indoor systems can be known only the person who inside the building. So, this paper focus on the design and implementation of knowing the fire status from remote. This proposed system designed has two sensors. One is the smoke sensor and the other is temperature sensor. If these sensors sense the required amount of temperature and smoke, they send SMS to dedicated mobile use and alarm system to know remote person and indoor persons. 

by Miss Cing Nuam Man | Miss Wai Mar Myint Aung "Design and Construction of GSM Based Fire Alarm System using PIC Microcontroller"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-6, October 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29287.pdf

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/29287/design-and-construction-of-gsm-based-fire-alarm-system-using-pic-microcontroller/miss-cing-nuam-man

call for paper Aerospace Engineering, international journal Chassis Engineering, ugc approved journals for engineering

Foundation and Synchronization of the Dynamic Output Dual Systems

In this paper, the synchronization problem of the dynamic output dual systems is firstly introduced and investigated. Based on the time domain approach, the state variables synchronization of such dual systems can be verified. Meanwhile, the guaranteed exponential convergence rate can be accurately estimated. Finally, some numerical simulations are provided to illustrate the feasibility and effectiveness of the obtained result. 

by Yeong-Jeu Sun "Foundation and Synchronization of the Dynamic Output Dual Systems"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-6, October 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29256.pdf

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/29256/foundation-and-synchronization-of-the-dynamic-output-dual-systems/yeong-jeu-sun

call for paper Structural Engineering, international journal Transport engineering, ugc approved journals for engineering

Review Paper on Study of Black Cotton Soil to Enhancing the Properties of Sub Grade and Base Layer of Pavement

Soil is basic and important element in Civil Engineering field. Stability of every structure depends on the type and characteristics of foundation which in turn depends on the type of soil. Many problems irrupt if expansive soil, Natural soil is to be used in foundation, because of its shrinkage and swelling properties. There are many methods to make natural soil stable for various constructions. Natural soil is comfortable for road work, compared to other types of soil. 

by Abhishek Kumar Thakur | Prof. Nitesh Kushwaha "Review Paper on Study of Black Cotton Soil to Enhancing the Properties of Sub Grade & Base Layer of Pavement"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-6 , October 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29536.pdf

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/29536/review-paper-on-study-of-black-cotton-soil-to-enhancing-the-properties-of-sub-grade-and-base-layer-of-pavement/abhishek-kumar-thakur

call for paper Computer Engineering, international journal Mechanical Engineering, ugc approved journals for engineering

Study of the Effects of Process Parameters on Tool Wear Rate in Electrical Discharge Machining by Taguchi Method

EDM machines are used to cut conductive metals of any hardness or that are difficult or impossible to cut with traditional methods. The problem of arriving at the optimum levels of the operating parameters has attracted the attention of the researchers and practicing engineers for a very long time. This paper introduces the research results of tool wear rate of SKD11 steel after EDM. The influence of the process paramaters to the surface roughness Ra is surveyed and the optimal value Ra Ratoiuu also be established. The process parameters current I, pusle on time ton, pulse off time tof and voltage is used in research on SR in EDM. Taguchi method is used in this study. 

by Minh - Nguyen Duc | Tai - Bui Tien "Study of the Effects of Process Parameters on Tool Wear Rate in Electrical Discharge Machining by Taguchi Method"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-6, October 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29266.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/29266/study-of-the-effects-of-process-parameters-on-tool-wear-rate-in-electrical-discharge-machining-by-taguchi-method/minh---nguyen-duc

call for paper Transport engineering, international journal Agricultural Engineering, ugc approved journals for engineering

Design and Structural Analysis of 3 Axis CNC Milling Machine Table

In the field of Engineering, the solution of many complex problems is great limitless and usually impossible by analytical methods. For high exactness and repeatability, machine tools are used in industrial operation. Normally, several components such as base, knee, saddle, machine table, column and headstock, column are the main parts of the machine tools to get reliable performance. The work piece is held and supported on the machine table. A machine table should be enough rigid and must have good mechanical properties, to obtain a good finished and accurate work piece on a three axis CNC milling machine. A finite element analysis FEA gives a methodical study of failure principle which helps for additional progress of the 3 axis machine tables. In this paper, Static Analysis is performed on machine table to find out stresses generated in table, deformation of the table due to its weight. The finite element analysis is done by making 3D geometry in Solidworks software and analyse by using ANSYS software. The material comparison is shown in table and Grey Cast Iron is more dependable than other materials. 

by Nyein Chan | Than Zaw Oo | Aung Myo San Hlaing "Design and Structural Analysis of 3 Axis CNC Milling Machine Table" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-6, October 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29197.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/29197/design-and-structural-analysis-of-3-axis-cnc-milling-machine-table/nyein-chan

call for paper Civil Engineering, international journal Agricultural Engineering, ugc approved journals for engineering

Design and Analysis of Quantization Based Low Bit Rate Encoding System

The objective of this paper is to develop a low bit rate encoding for VQ problems such as real time image coding.. The decision tree is generated by an offline process.. A new systolic architecture to realize the encoder of full search vector quantization VQ for high speed applications is presented here. Over past decades digital video compression technologies have become an integral part. Therefore the purpose is to improve image quality in Remote cardiac pulse measurement using Adaptive filter. It describes the approach to be used for feature extraction from many images.. This paper presents a real time application of compression of the image processing technique which can be efficiently used for the interfacing with any hardware. Therefore we have used Raspberry Pi in compression of image. We have developed an algorithm that is based on the endoscopic images that consist of the differential pulse code modulation. The compressors consist of a low cost YEF colour space converters and variable length predictive algorithm for lossless compression. 

by Mr. Nilesh Bodne | Dr. Sunil Kumar "Design and Analysis of Quantization Based Low Bit Rate Encoding System"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-6, October 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29289.pdf

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/29289/design-and-analysis-of-quantization-based-low-bit-rate-encoding-system/mr-nilesh-bodne

call for paper Agricultural Engineering, international journal Chemical Engineering, ugc approved journals for engineering

Design of State Estimator for a Class of Generalized Chaotic Systems

In this paper, a class of generalized chaotic systems is considered and the state observation problem of such a system is investigated. Based on the time domain approach with differential inequality, a simple state estimator for such generalized chaotic systems is developed to guarantee the global exponential stability of the resulting error system. Besides, the guaranteed exponential decay rate can be correctly estimated. Finally, several numerical simulations are given to show the effectiveness of the obtained result. 

by Yeong-Jeu Sun "Design of State Estimator for a Class of Generalized Chaotic Systems"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-6, October 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29270.pdf

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/29270/design-of-state-estimator-for-a-class-of-generalized-chaotic-systems/yeong-jeu-sun

call for paper Automotive Engineering, international journal Electrical Engineering, ugc approved journals for engineering