Design and Implementation of Electronic Payment Gateway for Secure Online Payment System

In e commerce, main problem is to be more secure for payment systems and disputation between online merchant and customer. To solve this problem, this paper presents design and implementation of Electronics Payment Gateway for online payment system. In this system, a customer's financial information credit or debit card information is sent directly to a Payment Gateway also called Trusted Third Party, TTP instead of sending it through an online merchant. The Payment Gateway can support more secure for online payment system. In this system, Secure Socket Layer SSL with Rivest Shamir Adleman RSA is used to enhance more secure connection in payment process. In secure online payment system, end to end encryption is required to maintain the integrity of transactions carried out online. RSA is more secure because its factors are large integers and key size is large, which increases the security. The electronic payment gateway provides the confidentiality by using RSA for online payment transactions and trusted third party to recover the disputation between online merchant and customer. 

by Kyaw Zay Oo "Design and Implementation of Electronic Payment Gateway for Secure Online Payment System"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5, August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd26635.pdf 

Paper URL: https://www.ijtsrd.com/engineering/information-technology/26635/design-and-implementation-of-electronic-payment-gateway-for-secure-online-payment-system/kyaw-zay-oo


call for paper Gas Engineering, international journal Geological Engineering, ugc approved journals for engineering

Performance Analysis of Autonomous Hybrid Distributed Generation Based on Typical Control Strategies for Rural Electrification in Myanmar

It is undeniable fact that even though fossil fuels are likely more to fulfill the requirements of energy, the rare of natural resources and their harmful contents for the environment have directed people to search for new energy sources like renewable resources such as hydro power, biomass, wind, solar and other types of clean energy. In order to highlight the proposed methodology, PV Diesel generator DG with battery energy system BESS based on two typical control strategies, load following LF control strategy and cycle charging CC control strategy, have been analyzed by using HOMER Software to supply the Makyiyay village which is located at 22.02 north latitude and 96.56 east longitude in the Naungkhyo Township, Southern Shan State in Myanmar. The yearly average solar radiation of that area is 4.895kWh m2 day and it is very important to prepare a proper load data to meet the current situation of the target village which has 45 household numbers. By calculating the total load demand, the peak demand of that proposed village is 34kW. The fractions of energy production from PV array and diesel generator of the proposed PV Diesel BESS hybrid system using LF control strategy are 60 and 40 to meet the demand. Moreover, the proposed hybrid system based on LF control strategy provides the lowest TNPC, COE and carbon emission than the hybrid system based on CC control strategy according to the evaluation results. In contrast, the analysis of evaluation results shows that the PV Diesel ESS based on LF control choice is more economically possible than that system based on CC control. 

by Phyu Phyu Win | Zin Mar "Performance Analysis of Autonomous Hybrid Distributed Generation Based on Typical Control Strategies for Rural Electrification in Myanmar"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5, August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd26695.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/26695/performance-analysis-of-autonomous-hybrid-distributed-generation-based-on-typical-control-strategies-for-rural-electrification-in-myanmar/phyu-phyu-win

call for paper Food Engineering, international journal Nuclear Engineering, ugc approved journals for engineering

Performance Analysis between H.323 and SIP over VoIP

There are a number of protocols that may be employed in order to provide the Voice over IP VoIP communication services. In VoIP system, H.323 and Session Initiation Protocol SIP are the two major standards. Both of these signaling protocols provide mechanisms for multimedia teleconferencing services. Although the two protocols architecture is quite similar, they have many differences. This system presents Voice Video over IP communication and summarizes the differences and performance of two major VoIP protocols, H.323 and SIP according to the packet delay variation, jitter, packet loss, and Packet end to end delay. It is found that both of them are non interoperable, approaching each other, their focus and applicability is still different. In this paper, the system is designed and configured by Graphical Network Simulator GNS3 and analyzed performance by Opnet Modeler Simulation. 

by Thet Zaw Aye "Performance Analysis between H.323 and SIP over VoIP"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5, August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd26647.pdf 

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/26647/performance-analysis-between-h323-and-sip-over-voip/thet-zaw-aye

call for paper Forestry Engineering, international journal Software Engineering, ugc approved journals for engineering

Strength of Concrete Structure Partial Replacement of Sand by Copper Slag

The main measure of the structural quality of concrete is its compressive strength. This property of concrete is commonly considered in structural design. Depending on the mix and time and quality of the curing, the compressive strength of concrete can be obtained up to 95 MPa or more. Commercial production of concrete with ordinarily aggregate is usually in the 20 to 80 MPa range with the most common ranges for cast in place buildings from 20 to 40 Mpa. On the other hand, precast and pre stressed applications often expect the strengths of 25 55 MPa. Although concrete is not normally designed to resist direct tension, the knowledge of tensile strength is used to estimate the load under which cracking will develop. This is imputable to its influence on the formation of cracks and its propagation to the tension side of the reinforced concrete flexural member. Shear, torsion, and other actions also produce tensile stresses to the particular section of concrete members. In most cases, member behavior changes upon cracking. So the tension strength of concrete is also considered in the proportioning concrete member. This strength is of interest in designing of highway and airfield slabs as shear strength and resistance to cracking are very important to sustain such loading. The tensile strength of concrete is relatively low, about 10 to 15 of the compressive, occasionally 20. 

by Priyatam Kumar | H. L. Yadav "Strength of Concrete Structure Partial Replacement of Sand by Copper Slag"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd26694.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/26694/strength-of-concrete-structure-partial-replacement-of-sand-by-copper-slag/priyatam-kumar

call for paper Environmental Engineering, international journal Food Engineering, ugc approved journals for engineering

Microcontroller Based Temperature Monitoring and Controlling System using XBee Network

Temperature controlling is one of the most important process variables in the process control. In this paper describes the design and implementation of a Wireless Sensor Networks WSN based on XBee technology to monitor the history and current temperature information of remote locations. In this work, the microcontroller is used to compute and compare the value of current temperature and the set point values. LCD is used to display the result data. This result data is also sent to the microcontroller where the operator controls the whole process. Then, the signal passes to the relays to On Off case of the fan for maintaining the correct temperature. 

by Mon Mon Aye | Aye Myat Myat Myo | Zar Chi Soe "Microcontroller Based Temperature Monitoring and Controlling System using XBee Network"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5, August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd27842.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/27842/microcontroller-based-temperature-monitoring-and-controlling-system-using-xbee-network/mon-mon-aye

call for paper Software Engineering, international journal Water Resource Engineering, ugc approved journals for engineering

Structural Behaviors of Reinforced Concrete Dome with Shell System under Various Loading Conditions

There are many different systems constructing dome structure. Among them, the shell system is the most popular in reinforcement concrete structure in these days. Therefore, it is necessary to know the structural behaviours of it. The objectives of this journal is to study the structural behaviours of the reinforced concrete dome structure with shell system under gravity loading and lateral loading in cyclone wind categories and various seismic zones. Seismic loads are considered from zone 1 to zone 4 based on UBC 1997.Wind loads are considered from I to V category as cyclone categories. Structural elements of RC dome structure are designed according to Building Code of American Concrete Institute ACI 318 99. With these member forces obtained from the SAP 2000 analysis, the design for all structural members will be performed according to ACI 318 99. The members of dome structure are designed as an intermediate moment resisting frame. The design of the shell beams is verified by using hand calculations with the output forces under the gravity loading and lateral loading obtained from the SAP2000 analysis. Equivalent static analysis procedure is used in this study. Based on the comparison of analysis results, it can be observed where the maximum deflection occurs along the meridian direction under seismic and wind loading conditions. Then, the axial force of dome structure is significant than any other forces in shell system. From the study of analysis results of both systems, it has been noticed that the bottom ring in shell system is essential to control the forces from the shell area. 

by Khine Zar Aung | Khin Aye Mon | Khin Thanda Htun "Structural Behaviors of Reinforced Concrete Dome with Shell System under Various Loading Conditions"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5, August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd27839.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/27839/structural-behaviors-of-reinforced-concrete-dome-with-shell-system-under-various-loading-conditions/khine-zar-aung

call for paper Biomedical Engineering, international journal Civil Engineering, ugc approved journals for engineering

Accuracy Improvement of PM Measuring Instruments

The PM10 concentration in the underground areas should be monitored to protect the health of the commuters in the underground subway system. The purpose of this work is to study the reliability of the instruments using light scattering method to measure the PM10 concentrations continuously. A linear regression analysis method is used to improve the performance of the instruments using light scattering method. Some experimental results show that a linear regression technique would be very helpful for the performance improvement of light scattering instruments such as Air test PM2500 and HCT 4103. 

by Tae-In Hyon | Gyu-Sik Kim "Accuracy Improvement of PM Measuring Instruments"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd26722.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/26722/accuracy-improvement-of-pm-measuring-instruments/tae-in-hyon

call for paper Software Engineering, international journal Water Resource Engineering, ugc approved journals for engineering