Wednesday, August 14, 2019

Monitoring and Control of Solar Power System using Reliance SCADA

This system presents the monitoring and control of real time data acquisition of a solar power system in reliance SCADA. SCADA supervisory control and data acquisition systems are currently employed in many applications, such as home automation, greenhouse automation, and hybrid power systems. Commercial SCADA systems are costly to set up and maintain therefore those are not used for small renewable energy systems. This system demonstrates applying Reliance SCADA and Arduino Uno on a small photovoltaic PV power system to monitor the current, voltage, of the PV and battery and also control the load from SCADA. The designed system uses low cost sensors, an Arduino Uno microcontroller, and free Reliance SCADA software. The Arduino Uno microcontroller collects data from sensors and communicates with a computer through a USB cable. Uno has been programmed to transmit data to Reliance SCADA on PC. In addition, Modbus library has been uploaded on Arduino to allow communication between the Arduino and our SCADA system by using the MODBUS RTU protocol. The results of the experiments demonstrate that SCADA works in real time and can be effectively used in monitoring a solar energy system. 

by Khin Pyone Ei Aung | Nyan Phyo Aung | Lwin Lwin Htay "Monitoring and Control of Solar Power System using Reliance SCADA"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd26459.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26459/monitoring-and-control-of-solar-power-system-using-reliance-scada/khin-pyone-ei-aung

call for paper Communication Engineering, international journal Civil Engineering, ugc approved journals for engineering

Automatic Monitoring and Controlling System for Vehicles using PIC Microcontroller

This paper is of great importance for monitoring and controlling the distance between the car and obstacles on the road. The objective of this paper was to monitor and control automatically the vehicle and to reduce many accidents. It is sure that this system will be able to save for human. This system mainly consists of the PIC 16F887A, temperature sensor DHT 11 , ultrasonic sensors HC SR04 , gas sensor MQ 2 , 20x4 LCD display, motors DC and motor driver L298N . The ultrasonic sensors are used to sense the distance for vehicle state information, which will continuously track for any obstacle from four sides of the car. The temperature changing from overheat of the car engine is monitored by using the temperature and humidity sensor. This system uses the gas sensor which will detect the smoke released by the heating car engine. The PIC 16F887A is used as a controller to control the direction of car. Moreover, if the vehicle detects the obstacles, this system displayed the distance between the car and obstacles on LCD and the safety alarm system contains by using a buzzer. 

by Lae Yin Mon | Ni Ni San Hlaing "Automatic Monitoring and Controlling System for Vehicles using PIC Microcontroller"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd26499.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26499/automatic-monitoring-and-controlling-system-for-vehicles-using-pic-microcontroller/lae-yin-mon

call for paper Mechanical Engineering, international journal Structural Engineering, ugc approved journals for engineering

Review Report on Cooling System and Control Model for Improved Engine Thermal Management

Advanced thermal management systems for combustion engines will improve fluid temperature regulation and servomotor power consumption to positively impact the pipage emissions, fuel economy, and parasitic losses by better regulating the combustion method with multiple computer controlled parts. Advanced automotive thermal management systems integrate electro mechanical components for improved fluid flow and thermodynamic control action. Progressively, the design of ground vehicle heating and cooling management systems require analytical and empirical models to establish a basis for real time control algorithms. One of the key elements in this computer controlled system is the smart thermostat valve which replaces the traditional wax based unit. This paper gives a review of the cooling system and control model for improved engine thermal management and related work. 

by Ankush Tandel | Amit Kaimkuriya "Review Report on Cooling System and Control Model for Improved Engine Thermal Management"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd25267.pdf 

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/25267/review-report-on-cooling-system-and-control-model-for-improved-engine-thermal-management/ankush-tandel

call for paper Biomedical Engineering, international journal Civil Engineering, ugc approved journals for engineering

Application of Unified Power Flow Controller in Nigeria Power System for Improvement of Voltage Profile

With the increased rate of urbanization and industrialization, the Nigerian electric power system is being put under pressure, high power losses which has led to fluctuation in voltage level. In this work the Nigeria 330Kv network of 42 bus system was considered. Data for the analysis were obtained from Transmission Company of Nigeria National Control Centre, Osogbo TCN and MATLAB PSAT software with newton Raphson's solution method embedded in it was used to carry out the analysis. The results of the analysis showed that many of the bus voltages were outside the voltage limits of ±5 i.e 0.95pu 1.05pu. After compensation with Flexible AC Transmission System devices FACTs namely Unified Power Flow Controller UPFC which can be used to control power flow on a transmission line, the voltage profile almost flat with bus voltages within acceptable voltage limits. It is also evident that the UPFC is device that can used to combat the voltage problem in the Nigerian electric power system. 

by Adikaibe James | Prof. Engr. F. O. Enemuoh | Aghara Jachimma "Application of Unified Power Flow Controller in Nigeria Power System for Improvement of Voltage Profile"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd27838.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/27838/application-of-unified-power-flow-controller-in-nigeria-power-system-for-improvement-of-voltage-profile/adikaibe-james

call for paper Computer Engineering, international journal Mechanical Engineering, ugc approved journals for engineering

Design and Implementation of Automatic Fire Fighting for Building using Peripheral Interface Controller

In this project, we have designed and implemented automatic fire fighting for building using PIC. It intended to prevent accidents and emergency cases of fire. It consists of gas sensor for detecting the fire, temperature sensor for sensing the environmental temperature, relay driver for pump control, alarm system and fire extinguishing system. When the temperature sensor detects a predefined temperature, the LED and buzzer will be turn on. When the smoke detector gas sensor senses a certain amount of smoke, the LED and buzzer will turn on. If both the temperature and smoke reach a predefined level, the alarm will ring and the extinguishing system will also activate, too. The advantage of this project is to reduce the amount of damages done by fire. The weak point of this project is the power supply using AC, so it will not work when electricity is out. 

by Tin Tin Ohn | May Thet Htar | Pyae Phyo Swe "Design and Implementation of Automatic Fire-Fighting for Building using Peripheral Interface Controller"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5, August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd27872.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/27872/design-and-implementation-of-automatic-fire-fighting-for-building-using-peripheral-interface-controller/tin-tin-ohn

call for paper Chemical Engineering, international journal Food Engineering, ugc approved journals for engineering

Brain Tumor Detection System for MRI Image

Today, computer aided system is widely used in various fields. Among them, the brain tumor detection is an important task in medical image processing. Early diagnosis of brain tumors plays an important role in improving treatment possibilities and increases the survival rate of the patients. Manual segmentation of brain tumors for cancer diagnosis, from large amount of Magnetic Resonance Imaging MRI images generated in clinical routine, is a difficult and time consuming task or even generates errors. So, the automatic brain tumor segmentation is needed to segment tumor. 


The purpose of the thesis is to detect the brain tumor quickly and accurately from the MRI brain image. In the system, the average filter is used to remove noise and make smooth an input MRI image and threshold segmentation is applied to segment tumor region from MRI brain images. Region properties method is used to detect the tumor region exactly. And then, the equation of the tumor region in the system is effectively applied in any shape of the tumor region. 

by Moe Moe Aye | Kyaw Kyaw Lin "Brain Tumor Detection System for MRI Image"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5, August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd27864.pdf 

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/27864/brain-tumor-detection-system-for-mri-image/moe-moe-aye

call for paper Electrical Engineeringinternational journal Forestry Engineering, ugc approved journals for engineering

Experimental Study on the Properties of Rice Husk Ash with A.A.A Portland Cement

In the last decades, the use of residue in civil construction, especially in addition to concrete, has been subject of many researches due to reduce the environmental pollution factors, it may lead several improvements of the concrete properties. Myanmar is one of the largest rice producing countries and per capita rice consumption is higher than that in any other countries. Considering that 20 of the grain is husk, and 20 of the husk after combustion is converted into ash. In this study, the chemical composition and physical properties of A.A.A Portland cement are tested. The rice husk ash RHA is obtained from Shwebo. And then, the ingredients of mortar and concrete such as sand and aggregate are tested. In this study, Ayeyarwaddy rivers sand is used. According to the silica content, the replacement percentage of RHA is considered as 0, 5, 10, 15 and 20 by weight of cement. Finally, the compressive and tensile strength of mortar, and compressive strength of concrete are tested with various percentages of RHA. The results were compared to control sample and the viability of adding RHA to concrete is verified. 

by Nyein Nyein Thant | Tin Yadanar Kyaw "Experimental Study on the Properties of Rice Husk Ash with A.A.A Portland Cement"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5, August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd27824.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/27824/experimental-study-on-the-properties-of-rice-husk-ash-with-aaa-portland-cement/nyein-nyein-thant

call for paper Forestry Engineering, international journal Software Engineering, ugc approved journals for engineering