Comparative Study on Construction Sequence Analysis on Steel Structure without and with Floating Columns

This paper presents the construction sequence analysis on the setback steel structure. In this study, the proposed building is eleven storey setback steel structure. The length of the proposed building is 78ft and width is 66ft. The effective height of proposed building is 142ft. This building is located in seismic destructive zone V, Mandalay. The basic wind speed is 80mph. The structure is composed of special moment resisting frame SMRF. Structural elements are designed according to AISC 360 10. Load consideration and stability checking for proposed building are based on ASCE 7 10. The proposed building is analysed and designed with the help of ETABS 2016 version 16.2.1 software. After response spectrum analysis RSA has done for the checking of the stability, then construction sequence analysis CSA is considered. And then the structural analysis results of the proposed building are studied such as axial force, shear force and bending moment of the structural frame elements. The effect of floating columns with CSA on axial force for the selected columns of proposed building is more influence from first to sixth floor level. The value of shear force with CSA is abruptly increased at the floated columns level and the other level are gradually decreased. The value of bending moment at the floated columns level is abruptly increased due to the effect of floating columns with CSA and the other level are gradually decreased. 

by Tin Yadanar Kyaw | Nyein Nyein Thant "Comparative Study on Construction Sequence Analysis on Steel Structure without and with Floating Columns"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5, August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd27996.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/27996/comparative-study-on-construction-sequence-analysis-on-steel-structure-without-and-with-floating-columns/tin-yadanar-kyaw

call for paper Telecommunications, international journal Information Technology, ugc approved journals for engineering

Simulation of 3 Phase, 24 Pulse GTO Converter for Flow Control of Transmission System

Gate Turn off GTO thyristor based power control controller for flow control of transmission system is used to regulate voltage and reactive power improment. GTO thyristor switching devices with high power handling capability and the advancement of the other type of power semiconductor devices such as IGBTs, MOSFETs, Ideal switch and so on have led to the development of fast controllable reactive power source utilizing new electronic switching and converter technology. Nowadays, the development of a large capacity Gate Turn off thyristor has made it possible to manufacture self commutated converter employing GTO thyristor for power applications. At present, most of the research on GTO thyristor has focused on their use in power electronic systems at high switching frequencies. GTO thyristor enable the design of the solid state shunt equipment based upon switching technology. The improved rating of GTOs made possible the use of voltage sourced converter VSC in power system applications. In this paper, GTO based voltage source converter VSC is used in high power Flexible AC Transmission Systems FACTS which are used to control power flow on transmission grids. It can be used to build a model of shunt or series static compensator STATCOM or SSSC or, using two such converters, a combination of shunt and series devices known as Unified Power Flow Controller UPFC. This paper has shown a basic application of MATLAB Sim Power Systems programming for 24 pulse GTO converter STATCOM. 

by Zin Wah Aung | Aye Myo Thant | Hnin Yu Lwin "Simulation of 3-Phase, 24 Pulse GTO Converter for Flow Control of Transmission System"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5, August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd27887.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/27887/simulation-of-3-phase-24-pulse-gto-converter-for-flow-control-of-transmission-system/zin-wah-aung

call for paper Textile Engineering, international journal Software Engineering, ugc approved journals for engineering

A Review on Civil Structural Optimization

Reinforced Concrete RC slab is the key structural component and is used in houses to provide flat surfaces floors and ceilings . Concrete slabs are effective systems where putting columns interrupts the structures Audiences, parking lots, hotels, airports, etc. serviceability to cover the lengthy spans. From the economic point of view the total cost optimization of RC slabs is very important issue and must be the prime concern of structural optimization in near future. In recent past, metaheuristic optimization algorithms have been applied to many structural problems, and RC slabs are no exception as a result a number of articles on RC slabs optimization have been published. This paper presents firstly presents a brief overview of four type of slabs Simply Supported, One end Continuous, Both end Continuous, and Cantilever , then describes the optimization algorithms and finally presents a review of some of the recent literatures related to the RC slab optimization. 

by Dinesh Kumar Suryavanshi | Dr. Saleem Akhtar "A Review on Civil Structural Optimization" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd25232.pdf

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/25232/a-review-on-civil-structural-optimization/dinesh-kumar-suryavanshi

call for paper Automotive Engineering, international journal Electrical Engineering, ugc approved journals for engineering

Design Optimization of Reinforced Concrete Slabs Using Various Optimization Techniques

This paper presents Reinforced Concrete RC slab design optimization technique for finding the best design parameters that satisfy the project requirements both in terms of strength and serviceability criteria while keeping the overall construction cost to a minimum. In this paper four different types of RC slab design named as simply supported slab, one end continuous slab, both end continuous slab and cantilever slab are optimized using three different metaheuristic optimization algorithms named as Genetic Algorithms GA , Particle Swarm Optimization PSO and Gray Wolf Optimization GWO . The slabs with various end conditions are formulated according to the ACI code. The formulated problem contains three optimization variables, the thickness of the slab, steel bar diameter, and bar spacing while objective involves the minimization of overall cost of the structure which includes the cost of concrete, cost of reinforcement and the constraints involves the design requirement and ACI codes limit. The proposed method is developed using MATLAB. Finally, to validate the performance of the proposed algorithm the results are compared with the previously proposed algorithms. The comparison of results shows that the proposed method provides a significant improvement over the previously proposed algorithms. 

by Dinesh Kumar Suryavanshi | Dr. Saleem Akhtar "Design Optimization of Reinforced Concrete Slabs Using Various Optimization Techniques" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd25231.pdf

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/25231/design-optimization-of-reinforced-concrete-slabs-using-various-optimization-techniques/dinesh-kumar-suryavanshi

call for paper Agricultural Engineering, international journal Chemical Engineering, ugc approved journals for engineering

Simulation and Implementation of PLC Based for Detecting Burned Potato Chips and Remove using PLCSIM and HMI

This paper describes about to use the PLC techniques for automation of industrial product manufacturing to achieve high throughput and improved quality and consistency. In this system, PLC is used the heart of the system. Light dependent sensor, push button switch, light source, conveyor and blower is controlled by PLC. The proposed system of operation is devised by ladder diagram. Software implementation is used for demonstrating the ease of operation with this control along with tuning of the entire system is offered. This paper presents a study by simulation and experimental models for proposed system of PLCs. In this paper, consideration was given to the design of an HMI for an automated burn chips removed from conveyor which can be operated automatically by the press of start buttons. The design stages included screen interfacing for the HMI, programming the HMI by assigning tags, integration into Step 7 brand of PLC using Ethernet, simulation of the program using "PLCSIM" and the programming codes of the automated burn chips. The designed HMI will be useful to manufacturing industries having industrial automated systems. 

by Htet Htet Aung | Thu Zar Thein "Simulation and Implementation of PLC Based for Detecting Burned Potato Chips and Remove using PLCSIM and HMI"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5, August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd26724.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26724/simulation-and-implementation-of-plc-based-for-detecting-burned-potato-chips-and-remove-using-plcsim-and-hmi/htet-htet-aung

call for paper Civil Engineering, international journal Agricultural Engineering, ugc approved journals for engineering

Analysis of Soil Stabilization by Utilizing Iron Mineral by Products Steel Slag

The huge measure of modern waste as expanded step by step and transfer turns into an intense issue. it is important to use the steel slag waste. Steel slag is a result gotten from steel industry. It is created as a buildup during the generation of steel. Due to the high transfer cost as a waste material and the general positive highlights of steel slag, it has been pronounced a valuable development material. The measure of age is around 24 lacs mt for every year from various steel ventures in the india. The growing needs for fully furnished highways in the developed countries has led engineers to search for the durable cost effective measure for roadway construction. The basic necessity for suitable base course for roads is an important aspect in construction. The paper aims at utilizing the common waste materials for the improvement of roads. One such material that was analyzed in the paper for the execution of road work is the steel slag which is furnished in tones in the steel factories across the country. The use of the material is found to have improved the sub grade properties of soil to a good extent. 

by Nitesh | Sumesh Jain "Analysis of Soil Stabilization by Utilizing Iron Mineral by Products (Steel Slag)" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd25190.pdf

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/25190/analysis-of-soil-stabilization-by-utilizing-iron-mineral-by-products-steel-slag/nitesh

call for paper Civil Engineering, international journal Agricultural Engineering, ugc approved journals for engineering

Soil Stabilization Study by using Steel Slag

The growing needs for fully furnished highways in the developed countries has led engineers to search for the durable cost effective measure for roadway construction. The basic necessity for suitable base course for roads is an important aspect in construction. The paper aims at utilizing the common waste materials for the improvement of roads. One such material that was analyzed in the paper for the execution of road work is the steel slag which is furnished in tones in the steel factories across the country. The use of the material is found to have improved the sub grade properties of soil to a good extent. 

by Nitesh | Sumesh Jain "Soil Stabilization Study by using Steel Slag" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5, August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd25189.pdf

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/25189/soil-stabilization-study-by-using-steel-slag/nitesh

call for paper Transport engineering, international journal Agricultural Engineering, ugc approved journals for engineering