Authenticated Access of ATM Cards

Due to the rise and rapid growth of E commerce the use ATM cards has drastically increased which caused an explosion in the ATM card frauds. In real life fraudulent transaction are scattered with genuine transactions Hence simple pattern matching techniques, for instance Personal Identification Number PIN are not enough to detect these frauds accurately. Implementation of efficient fraud detection system has become imperative to reduce people loss. Our project aims to prevent the use of ATM cards without the authorization of owner or card holder. At present the card can be accessed if the PIN is known. The amount withdrawn or transferred is notified by the card holder only after complete transaction .Hence the process can't be retrieved. But the project intimates the card owner before the transaction begins even if the PIN is known. This is limited only to card transaction and not to online mode. Hence the verification can be extended to online process. 

Poornima D | Preethi Mariam Oommen P | Nirmala Devi K "Authenticated Access of ATM Cards"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23330.pdf

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23330/authenticated-access-of-atm-cards/poornima-d

call for paper languages, call for paper health science, call for paper social science 

Preparation of Fan Coil Unit using Revit Software

This project “Fan coil unit preparation by using Revit software” deals with the study of air conditioner and water conditioner system in a single unit. The main object behind this project is to supply chilled water through MS pipes based on load calculations by considering the required standards. In this pipe design calculations are done by using the AUTODESK REVIT MEP software to design pipes with proper adjustments and fittings. This fan coil unit system is to be designed only for places where natural ventilation is available. The multifunctional system which can provide cold water, refrigeration effect and air conditioning effect with regular air or space conditioning system. Fan coil unit is based on indirect refrigeration system mostly used as secondary refrigeration system. In this project we have using water as primary refrigerant. Along with this, air and water systems are used primarily for perimeter building spaces with high sensible loads and where close control of humidity is not a primary criterion. These systems work well in the residential buildings, office buildings, hospitals, schools, apartment buildings, and other buildings where their capabilities can meet the project design intent and criteria. In most climates, these systems are designed to provide all of the required heating and cooling needs for perimeter spaces, and simultaneous heating and cooling in different spaces during intermediate seasons. 

BY A. Vijay kumar | O. Ajay kumar | K. Bala Kumar | M. Dinesh kumar "Preparation of Fan Coil Unit using Revit Software" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23376.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23376/preparation-of-fan-coil-unit-using-revit-software/a-vijay-kumar

call for paper life sciences, call for paper languages, call for paper health science

Automated Timer Socket using Arduino

A glace view of our idea is designing a new innovative idea which can monitor the flow of power supply to the existing plug sockets. As in India demand for electricity is increasing day by day, there is a need to implement an idea in order to meet this problem. So not only synthesizing an method to generate the electricity but also a method to save the electricity. Even though there are smart house systems basing on home automation, they only disconnect the electrical or electronic devices form the supply but the power supply to the socket in which the appliance is plugged in can't be stopped. The myth about overcharging your phone is a common one. The amount of charge going into your device shouldnt be an issue as most are smart enough to stop taking a charge once full, just topping up as needed to stay at 100 per cent. The problems occur when the battery overheats, which can cause damage. So.in our paper we are proposing and implementing the automated timer socket using arduino for real time applications. 

BY G. Chakra Mahesh Babu | I. Mahesh Veera Bhadrarao | M. Venkata Balaji | Ch. Sai Praveen "Automated Timer Socket using Arduino"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23157.pdf

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/23157/automated-timer-socket-using-arduino/g-chakra-mahesh-babu

call for paper arts, call for paper medical science, call for paper life sciences

Fabrication of Electric Two Wheeler

The percentage of pollutants in the air from vehicular emission has increased as market constitutes of more fossil fuel powered vehicles than new green technology. Now days demand of the fossil fuel is reduced in the market we are encourage the new technology and green technology that convent electrical energy to mechanical energy with eco friendly. In this project all conventional parts engine, petrol tank of two wheeler replaced with electrical components motor, battery and controller . This project electric drive is given to back wheel same like the IC engine powers the back wheel drive. Thus the project prototype can drive on rechargeable battery as a fuel with the help of the controller and throttle. When throttle is raised according to that motor shaft runs similarly with chain drive and speed varies. As the IC Engine is least efficient at low speed traffic condition , electrical vehicle can give more efficient in this case. The electric drive is not only silent but also low heat dissipation compared to petrol powered two wheeler. The electric vehicle can't travel a long distance, but it can carry heavy loads. Due to these reasons, Electric vehicles are coming into the market with more benefits. 

BY B. Phanindra Kumar | S. Soumya Reddy | R .Sudharshan | P. Vamshi Krishna "Fabrication of Electric Two Wheeler"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23377.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23377/fabrication-of-electric-two-wheeler/b-phanindra-kumar

call for paper medical science, call for paper life sciences, call for paper languages

Sentiment Analysis

Sentiment Analysis SA is an ongoing field of research in text mining field. SA sentiment analysis is the computational treatment of opinions, sentiments and text. This s paper deals in a comprehensive overview of the recent updates in this field. Many recently proposed algorithms amend and various SA applications are investigated and presented briefly in this paper. The related fields to SA transfer learning, emotion detection, and building resources that attracted researchers recently are discussed. The main objective of this paper is to give nearly full image of SA techniques and the related fields with brief details. The main contributions in this paper include the sophisticated categorizations of a large number of recent articles and the illustration of the recent trend of research in the sentiment analysis and its related areas. 

BY Prof. Richa Mehra | Diksha Saxena | Shubham Gupta | Joy Joseph "Sentiment Analysis"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23375.pdf

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/23375/sentiment-analysis/prof-richa-mehra

call for paper commerce, call for paper arts, call for paper medical science

Two Wheel Controlled Spy Robot

Spy robot is a Wi Fi controlled robot. A camera mounted on the robot sends real time video signals on to the user side, which can be seen on a display. Robot movements can be monitored looking at the display. Saving human life and providing security to the same both are two different aspects, but both are essential and instead mandatory. A robot is a sort of human replacement which is controlled by human itself. Areas where human cannot be sent, or life of human is endangered robots can be used in such cases. In various military applications and for security purposes our project can also provide live streaming of various on goings which the robot witness at the site. The more advanced features used in this spy robot is to climb the vertical and inclined surfaces, obstacle detector, night vision camera to detect the objects in darkness. The goal of spy robot is to search interesting stuff from where people are not able to reach. This project has three subsystems Hardware, Software and Mechanical. The project is comprised of basically three modules, which handles all the basic Functionalities of the robot. 

BY B. Phanindra Kumar | . Shiva Kumar | Md. Rafeeq | V. Sai Kumar | T. Navaneetha "Two Wheel Controlled Spy Robot"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23359.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23359/two-wheel-controlled-spy-robot/b-phanindra-kumar

call for paper management, call for paper commerce, call for paper arts

Time Dependent Settlement Response Model of Tested Piles in Coastal Region of Nigeria

Prediction of pile settlement has been a major challenge to geotechnical engineering researchers and professionals, due to the nonlinear behavior of the soil. This paper focuses on developing a predictive model for determining settlement time response of pile load tests from the coastal region of Nigeria. Non parametric statistical analysis was carried out on the load settlement response data of static load test of piles from five locations in Lagos metropolis, Nigeria. Regression analysis was done on the predictive settlement data to determine the required predictive model. The maximum settlement observed was 9.991 mm with a mean value of 7.892 mm. A significant correlation of more than 50 existed for the various settlement data. Consequently, a predictive model was developed for determining settlement time response of static pile load tests. 

BY Akpila S. B. | Jaja G. W. T. "Time Dependent Settlement Response Model of Tested Piles in Coastal Region of Nigeria"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23306.pdf

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/23306/time-dependent-settlement-response-model-of-tested-piles-in-coastal-region-of-nigeria/akpila-s-b

call for paper biological science, call for paper mathematics, call for paper physics