Home Automation Android Based GSM System

The main aim of the project is to develop a system, which uses mobile technology that keep control of the various units of the automobiles, which executes with respect to the signal sent by mobile. In today's time every system is automated in order to face new challenges. Automated system has minimized manual operation, so that the flexibility, reliabilities are found to be highly accurate. Hence every field prefers automated control systems. Specifically in the field of electronics automated systems are proved to be best. Probably the important factor to know about the GSM is that it is an international standard. 

If you travel around the world, global system for mobile communication is only type of cellular service available in present time. Rather than analog service global system for mobile communication GSM was developed as a digital system using TDMA technology. For using devices the unique concept has been about to implement to operate them remotely by using global system for mobile communication , which enables the user to remotely control ON OFF condition of household appliances. 

Only a simple SMS sending to the global system for mobile communication modem at nearer place, the devices can be turned ON OFF and the status of the devices can be sent to the prescribed mobile number registered in the microcontroller. We can control the appliances using mobile. We develop the android app on our mobile. That we can control the any household devices. 

By Miss. Snehal Arun Khulape | Miss. Sakshi Rajendra Malage | Miss. Manasi Sudhir Patil | Miss. Arfa Aslam Bargir | Mr. Sagar V. Chavan "Home Automation Android Based GSM System" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-6 , October 2018, 

URL: http://www.ijtsrd.com/papers/ijtsrd18740.pdf

Direct Link: http://www.ijtsrd.com/engineering/computer-engineering/18740/home-automation-android-based-gsm-system/miss-snehal-arun-khulape

international journals in engineering, paper publication for engineering, conference issue publication

IOT Based Structural Health Monitoring

Structural Health Monitoring is an emerging field of science and technology. The process of implementing a damage detection and characterization strategy for engineering structures is referred to as Structural Health Monitoring SHM . The SHM process involves the observation of a system over time using periodically sampled dynamic response measurements from an array of sensors, the extraction of damage-sensitive features from these measurements, and the statistical analysis of these features to determine the current state of system health. The research paper describes the piezo-vibrational sensor and accelerometer sensors to monitor the prototype of bridge. 

By Junaid Rasool "IOT Based Structural Health Monitoring" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-6 , October 2018, 

URL: http://www.ijtsrd.com/papers/ijtsrd18743.pdf

Direct Link: http://www.ijtsrd.com/engineering/electrical-engineering/18743/iot-based-structural-health-monitoring/junaid-rasool

review papers, ugc approved journals for engineering, special issue publication

Performance Analysis of PV Modules A Review

In this paper literature review of performance analysis of PV modules are supposed to be monitored continuously for their parameters open voltage Voc , short current Isc , temperature, insolation, time etc. In proposed system don't need any person to be present physically on sight, so that the real time monitoring system is used. Home automation unit, sports using wireless sensor network. This monitoring system use for check PV modules performance analysis daily. Different platform like Microcontroller, ASIC, PIC microcontroller and embedded systems are used to design the system based on this performance and in the recent years cloud based systems have emerged. In future using IoT we can develop a system which will help to monitor different PV panel parameters or Faults.

By Trupti L. Chavan "Performance Analysis of PV Modules: A Review"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-6 , October 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd15819.pdf

Direct Link: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/15819/performance-analysis-of-pv-modules-a-review/trupti-l-chavan

manuscript publication, submit paper online, indexed journal

Effect of Quartz sand Grains Diameter on the Mechanical Properties of Mortars

The aim of this study is to evaluate experimentally the influence of quartz dune sand incorporation in the cement matrix by mass substitution at different percentages and diameters, on the mechanical properties of the mortars. Properties of the mortars were determined by flexural traction and compressive strength the results obtained highlight the effect of the sand dune grain diameter on the mechanical properties of the mortars tested. The use of quartz dune sand with a diameter of less than 0.16mm improved the mechanical strength of mortars.

By Azhar Badaoui | Abdeslam Benamara | Mohamed Amine Benaimeche "Effect of Quartz sand Grains Diameter on the Mechanical Properties of Mortars" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-6 , October 2018, 

URL: http://www.ijtsrd.com/papers/ijtsrd18581.pdf

Direct Link: http://www.ijtsrd.com/engineering/civil-engineering/18581/effect-of-quartz-sand-grains-diameter-on-the-mechanical-properties-of-mortars/azhar-badaoui

high impact factor, ugc approved journals for engineering, special issue publication

ZCT Precoding Based SLM Technique for PAPR Reduction

High Peak to Average Power Ratio PAPR is the major drawback of Orthogonal Frequency Division Multiplexing OFDM system. In this paper, we propose Zadoff-Chu matrix Transform ZCT precoding Selected Mapping SLM based OFDM SLM-OFDM system for PAPR reduction. This technique is based on precoding the constellation symbols with ZCT precoder matrix row-wise after the multiplication of phase rotation factor and before the Inverse Fast Fourier Transform IFFT in the SLM based OFDM SLM-OFDM Systems. At the clipping rate of 10-3, simulation results show that our proposed system can reduce the PAPR up to 6.8 dB with N=64 or 256 System subcarriers and V=16 Dissimilar phase sequences for 4QAM modulation. ZCT based SLM-OFDM system can avoid signal degradation in performance when passes through a nonlinear High-Power-Amplifier HPA . 

By A. A. A. Wahab | L. T. Zhan | H. Husin | W. A. F. W. Othman | Syed Sahal Nazli Alhady "ZCT Precoding Based SLM Technique for PAPR Reduction" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-6 , October 2018, 

URL: http://www.ijtsrd.com/papers/ijtsrd18572.pdf

Direct Link: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/18572/zct-precoding-based-slm-technique-for-papr-reduction/a-a-a-wahab

high impact factor, ugc approved journals for engineering, special issue publication

Workflow in Treatment Process

This paper presents an overview of treatment processes. In order to discuss the workflow in a treatment process, treatment activities must be defined and analyzed. This paper describes the number of treatment activities which will be considered for defining the Treatment process. 

By Dr. Sumagna Patnaik | Dr. Towheed Sulatna "Workflow in Treatment Process" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-6 , October 2018, 

URL: http://www.ijtsrd.com/papers/ijtsrd18564.pdf

Direct Link: http://www.ijtsrd.com/engineering/software-engineering/18564/workflow-in-treatment-process/dr-sumagna-patnaik

peer reviewed journals, manuscript submission, call for paper engineering

Review on Recent Advancements in the Field of Reinforced Epoxy Nano Composits

Composite materials especially the polymer matrix materials are well acknowledged for their applications in aerospace, automotive and structural applications. They are considerably light weight and offers high strength weight ratio. Epoxy is one of the widely used matrix material in PMCs Polymer matrix composite due to its exceptional bonding capabilities, it finds applications in the field of coating, adhesives and composite materials. Graphene is a novel material in the field of composite materials it offers high strength, very high electrical conduction and heat transfer. The composites of Epoxy and Graphene hybrids exhibit very high mechanical and thermal properties.

By Sandesh K S | Mahesh V M | Muralidhara B K "Review on Recent Advancements in the Field of Reinforced Epoxy Nano Composits" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-6 , October 2018, 

URL: http://www.ijtsrd.com/papers/ijtsrd17139.pdf

Direct Link: http://www.ijtsrd.com/engineering/mechanical-engineering/17139/review-on-recent-advancements-in-the-field-of-reinforced-epoxy-nano-composits/sandesh-k-s

multidisciplinary journal, submit paper online, indexed journal