Beneficial Usage of Autoclaved Aerated Concrete Block

This paper is about the study of beneficial usage of AAC block production in Mother Industrial Co., Ltd (AAC and APC block factory). Autoclaved Aerated Concrete is one of such green materials. It not only uses the waste material like fly ash but also provides adequate strength to structures. The main aim of this paper is to show the beneficial usage of AAC block instead of the use of conventional brick. 

For that, the beneficial usage of AAC block is showed on many ways. The beneficial usage of AAC block shows the cost saving calculation of AAC block. As the next way, the beneficial usage of AAC block shows the weight saving calculation of AAC block. 

Quality control chart (x bar and R chart) use to prove the benefit of AAC blocks in checking the production process. The other way is the compressive strength calculation between conventional brick and AAC block to show the benefit of AAC block. Finally, the power consumption cost saving calculation of AAC block compared with conventional brick is to show the benefit of AAC block.

By Khin War Oo | Su Nandar Hlaing"Beneficial Usage of Autoclaved Aerated Concrete Block"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-5 , August 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd18207.pdf

Direct URL: http://www.ijtsrd.com/engineering/industrial-engineering/18207/beneficial-usage-of-autoclaved-aerated-concrete-block/khin-war-oo

research papers, paper publication for engineering, conference issue publication

Modeling and Simulation of Bevel Gearboxes in AutoCAD

Designing and developed of aeronautic bevel gearboxes is a complex and time-consuming method. A gear or cogwheel is a rotating machine part having cut like teeth, or cogs, which mesh with another toothed part to transmit torque. Geared devices can change the speed, torque, and direction of a power source. Gears almost always produce a change in torque, creating a mechanical advantage, through their gear ratio, and thus may be considered a simple machine. 

The teeth on the two meshing gears all have the same shape. Two or more meshing gears, working in a sequence, are called a gear train or a transmission. A gear can mesh with a linear toothed part, called a rack, producing translation instead of rotation. This is due to the high class necessities to the aviation industry products and the compound kinematic of the machining process. 

So far, in practice, this procedure has essential a series of study and prototypes testing. The improvement, has been made in the field of Computer Aided Design environment, allows growing use in design method and carries out the required research in the CAD environment. This approach simplifies and accelerates the aeronautic bevel gearboxes design development.

By Potnuru Sandeep | Rajesh C V S"Modeling and Simulation of Bevel Gearboxes in AutoCAD" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-5 , August 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd18200.pdf

Direct URL:http://www.ijtsrd.com/engineering/mechanical-engineering/18200/modeling-and-simulation-of-bevel-gearboxes-in-autocad/potnuru-sandeep

best journal, manuscript submission, call for paper engineering

Analysis of Computer Aided Design Employed in Landscape Design

This research aims at making a thorough analysis on the computer aided design (CAD) employed in landscape design in an attempt to make computer play a better role in landscaped design and improve the quality of the design. This essay firstly gives a picture of the current development of CAD employed in landscape design, then points out the problems and provides relative solutions. 

Then it comes to the application of CAD. Judging from the process of CAD landscape design and common CAD software programs, this essay introduces several commonly used software programs and explains the advantages and shortcomings of these programs to allow users to choose according to their needs. Finally, since virtual reality is the latest computer technology, this essay also gives detailed analysis of virtual reality' application to practical use. 

It explains the process of modeling of virtual reality and gives further demonstration of CAD' advantages in landscape design. Although there is still a lot to be advanced, the trends of CAD are promising. CAD and traditional landscape design are complementary to each other and will make great progress. 

By Uppada Komali | Rajesh CVS"Analysis of Computer Aided Design Employed in Landscape Design" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-5 , August 2018, 

URL: http://www.ijtsrd.com/papers/ijtsrd18230.pdf

Direct URL: http://www.ijtsrd.com/engineering/mechanical-engineering/18230/analysis-of-computer-aided-design-employed-in-landscape-design/uppada-komali

manuscript publication, submit paper online, indexed journal

The Shunt Active Power Filter to Compensate Reactive Power and Harmonics with optimized PI controller in a 3 Phase 3 Wire Distribution System

In this paper is to study the denomination Power quality and large refers to maintaining a proximal sinusoidal power distribution bus voltage at rated magnitude and frequency. This is mainly affected by the generation of harmonics. Even though electronic and non-linear devices are flexible, economical and energy efficient, they may degrade power quality by creating harmonic currents and consuming excessive reactive power.

This paper shows the method of improving the power quality using shunt active power filter with proposed optimized PI. The proposed topic comprises of PI controller, filter hysteresis current control loop, dc link capacitor. The switching signal generation for filter is from hysteresis current controller techniques. With the all these element shunt active power filter reduce the total harmonic distortion. 

Its source current, compensating current and THD values are studied, then PI control strategy is applied then the differences in THD are compared. The PI feedback compensation design starts with the small signal system' transfer function. Then an optimum constant of PI for a Shunt-APF is proposed and implemented to enhance its response to compensation of harmonics of linear and non-linear loads.

The obtained results have demonstrated the ability to compensate the current harmonics effectively under distorted source conditions. The fluctuation in the dc bus voltage of the filter depends on the compensation speed of the outer loop that regulates the dc bus voltage. The proposed shunt active filter model uses balanced linear and non-linear load works successfully lowers the THD within IEEE norms and satisfactorily works to compensate current harmonics. The model is made in MATLAB SIMULINK and successfully reduces the harmonic in the source current.

By Mr. Amit Kumar Rajan | Dr. E Vijay Kumar"The Shunt Active Power Filter to Compensate Reactive Power and Harmonics with optimized PI controller in a 3 Phase 3 Wire Distribution System"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-5 , August 2018, 

URL: http://www.ijtsrd.com/papers/ijtsrd18196.pdf

Direct URL:http://www.ijtsrd.com/engineering/electrical-engineering/18196/the-shunt-active-power-filter-to-compensate-reactive-power-and-harmonics-with-optimized-pi-controller-in-a-3-phase-3-wire-distribution-system/mr-amit-kumar-rajan

high impact factor, ugc approved journals for engineering, special issue publication

Comparison of Two Compensation Control Strategies for Shunt Active Power Filter in three Systems

Use of nonlinear loads has been increased in large extent in industries now-a-days which injects harmonic currents in supply system. These harmonics creates power quality issue. Shunt Active Power Filter (SAPF) is the popular and efficient solution to reduce these harmonics. SAPF can overcome voltage sag, eliminate harmonics and improves power factor. 

SAPF reduces total harmonic distortion (THD) to acceptable level. Reference current generation is the heart of APF. Reference current generation using instantaneous reactive power (IRP) theory is presented in this paper. IRP theory is widely used to control active power filters (APFs). Modeling of this technique is implemented in MATLABsimulink. The system is experimentally implemented using DS1104 card of d SPACE system.

By Mr. Amit Kumar Rajan | Dr. E Vijay Kumar "Comparison of Two Compensation Control Strategies for Shunt Active Power Filter in three Systems"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-5 , August 2018, 

URL: http://www.ijtsrd.com/papers/ijtsrd18198.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/18198/comparison-of-two-compensation-control-strategies-for-shunt-active-power-filter-in-three-systems/mr-amit-kumar-rajan

international peer reviewed journal, paper publication for engineering, conference issue publication

The Shunt Active Power Filter to Compensate Reactive Power and optimized THD with Improved Power by PI controller in a 3 Phase 3 Wire Distribution Network

Three phase induction motors are the most common and frequently encountered machines in industry. This type of machines has simple in design and easy to maintain. This project deals with study and analysis of performance of induction motor and study and implementation of various possible controllers using vector control scheme. The PI and PID controller has been discussed and literature survey has been carried out. On the basis of literature survey PI and PID control system are developed here.

By Mr. Swapnil S. Managule | Dr. E Vijay Kumar "The Shunt Active Power Filter to Compensate Reactive Power and optimized THD with Improved Power by PI controller in a 3 Phase 3 Wire Distribution Network"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-5 , August 2018, 

URL: http://www.ijtsrd.com/papers/ijtsrd18197.pdf

Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/18197/the-shunt-active-power-filter-to-compensate-reactive-power-and-optimized-thd-with-improved-power-by-pi-controller-in-a-3-phase-3-wire-distribution-network/mr-swapnil-s-managule

international peer reviewed journal, paper publication for engineering, conference issue publication

SMS Alarm System for Weather Station using Arduino and GSM Module

Nowadays, the monitoring of weather is utilized to make many important decisions on a daily routine. So, by using one of the technologies, this alarm system is designed for real-time weather station using Arduino and GSM module. This real-time weather station is to send the LCD display and the alert to the user via short message sending (SMS) in the wake of a critically of an event which is predefined by the user. One of the important applications of the system is to send the alarm message to the defined mobile phone number. This system is to be convenient for monitoring the weather conditions without manual efforts.

By Ma May Zin Oo | Dr. Nay Win Zaw | Daw Khin San Win"SMS Alarm System for Weather Station using Arduino and GSM Module"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-5 , August 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd18186.pdf

Direct URL: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/18186/sms-alarm-system-for-weather-station-using-arduino-and-gsm-module/ma-may-zin-oo

peer reviewed journals, manuscript submission, call for paper engineering