Monday, June 18, 2018

FPGA Implementation of Real Time Video Edge Detection by Using Different Filter

As another innovation created based on picture and video handling, moving item following and perceiving is one of the essential research subjects in application fields, for example, PC vision, mechanical autonomy and video data preparing. It has discovered broad applications in video data preparing.It has discovered broad applications in video pressure, target acknowledgment, keen observing, video recovery human PC cooperation and bio prescription, and so forth .The system of moving article following is to choose whether there exist objects moving in video and to position the objective fundamentally and remember it .the exactness rate of protest moving in video and to position the objective essentially. Composed calculations are effectively arranged, incorporated and actualized on Field Programmable Gate Array FPGA . Ponkarthick.

By V | Dr. Kala. S "FPGA Implementation of Real Time Video Edge Detection by Using Different Filter"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Special Issue | Active Galaxy , June 2018, 

Direct Link: http://www.ijtsrd.com/papers/ijtsrd14324.pdf

URl: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/14324/fpga-implementation-of-real-time-video-edge-detection-by-using-different-filter/ponkarthick-v

international journals in engineering, paper publication for engineering, conference issue publication

Tuesday, June 5, 2018

Behaviour of Interlocking Hollow Concrete Blocks


India is one of the highly populated countries of the world. It ranks the second in population next to China. Besides this, major section of the people live below poverty line. Due to over population, poverty, high land value & house deficit, major cities like Delhi & Mumbai are covered by slums. These slums not only make our country aesthetically bad but also the people living in such slums are deprived from basic facilities like proper sanitation, health care, and proper housing. 


The provision of affordable housing for these poor people needs to be facilitated by certain provisions. This can be possible only by introducing such technologies and materials that can be beneficial for building low-cost houses. Researchers worldwide have made significant efforts to find sustainable and affordable technologies to arrest the situation. Appropriate solution for affordable housing will vary from one location to another. Some general rules, however, apply to construction methods and housing systems. 

This project aims for developing a technology called dry stacking or mortar less buildings made from interlocking blocks. Mortarless brick construction, usually employing interlocking bricks, is growing in popularity round the world, indicative of acceptability. Mortarless techniques demonstrate the following advantages: increase of construction productivity, reduction in construction duration and labor and reduced construction cost. Because of its technological simplicity and local resource dependence, mortarless-block construction is more appropriate to many local communities than conventional mortared-brick techniques. 

By Mohammad Vekas Wani | Mr. Chitranjan Kumar"Behaviour of Interlocking Hollow Concrete Blocks"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-4 , June 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd14173.pdf 

Direct URL: http://www.ijtsrd.com/engineering/civil-engineering/14173/behaviour-of-interlocking-hollow-concrete-blocks/mohammad-vekas-wani

high impact factor, ugc approved journals for engineering, special issue publication

Design of Systolic Architecture Using Evolutionary Computation


This work presents a new concept for finding the optimal values for the entire three fundamental design vectors namely: scheduling, projection and processor so that not only architecture design could be feasible along with that maximum hardware utilizing efficiency could be achieved. This Approach also having the focus to minimize the total delay involved with systolic architecture design. Evolutionary programming has applied to find the optimal solution. 


Presented work and result will provide facility to designer without any involvement to find out best suited architecture for a particular application. The Proposed method having capability to find the large number of optimal vectors for any algorithm which can be implemented in systolic architecture. The increasing demands of speed and performance in modern signal and image processing applications necessitate a revolutionary super '“computing technology. The proposed method is coded in MATLAB editor and simulation environment. 

By Shilpa V | Suma V Shetty"Design of Systolic Architecture Using Evolutionary Computation"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-4 , June 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd15776.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/15776/design-of-systolic-architecture-using-evolutionary-computation/shilpa-v

international peer reviewed journal, paper publication for engineering, conference issue publication

Evaluation of Dispersion Potential for Some Problem Soils in Central Myanmar


Dispersive soils which occur in central region of Myanmar are easily erodible and serious problem of stability of embankments, earth dams, earths and earth retaining structures. These soils are found in regions where the annual rainfall is less than 800 mm. Dispersive soil is structurally unstable and the presence of dispersive soil is indicated by occurrence of erosion gullies, sink holes, spew holes and piping. 


In some parts of the central Myanmar, dispersive soils have to be used for construction purpose since no other soil material is available. Dispersion only occurs in non-saline or rain water. If dispersive soils have been used in the construction of earth-dams and embankments, serious piping and failures are occurred. In Myanmar, some problems are found in central region of Myanmar. 

The study soil is investigated by emersion test in field and then physical tests are done in Yangon Technological University and chemical tests are done in Irrigation and Management of Water Utilization Department in Myanmar. According to these tests results, most of the study soils are dispersive. 

This paper presents the results of study soils, soil structural problems along Yangon-Mandalay Express Way, dispersive potential rating for the study soils and the correlation between Exchangeable sodium percentage (ESP) and Atterberg's limits. 

By Khin Win Nwe | Nyan Myint Kyaw"Evaluation of Dispersion Potential for Some Problem Soils in Central Myanmar"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-4 , June 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd15694.pdf 

Direct URL: http://www.ijtsrd.com/engineering/civil-engineering/15694/evaluation-of-dispersion-potential-for-some-problem-soils-in-central-myanmar/khin-win-nwe

peer reviewed journals, manuscript submission, call for paper engineering

Single Image Super-Resolution Using Analytical Solution for L2-L2 Algorithm


This paper addresses a unified work for achieving single image super-resolution, which consists of improving a high resolution from blurred, decimated and noisy version. Single image super-resolution is also known as image enhancement or image scaling up. In this paper mainly four steps are used for enhancement of single image resolution: input image, low sampling the image, an analytical solution and L2 regularization. This proposes to deal with the decimation and blurring operators by their particular properties in the frequency domain, which leads to a fast super-resolution approach. 


And an analytical solution obtained and implemented for the L2-regularization i.e. L2-L2 optimized algorithm. This aims to reduce the computational cost of the existing methods by the proposed method. Simulation results taken on different images and different priors with an advance machine learning technique and conducted results compared with the existing method. 

By Varsha Patil | Meharunnisa SP"Single Image Super-Resolution Using Analytical Solution for L2-L2 Algorithm"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-4 , June 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd15635.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/15635/single-image-super-resolution-using-analytical-solution-for-l2-l2-algorithm/varsha-patil

multidisciplinary journal, submit paper online, indexed journal

An Image Quality Assessment of Multi-Exposure Image Fusion by Improving SSIM


Multi-exposure image fusion (MEF) is viewed as a viable quality upgrade system generally received in purchaser hardware, A solitary caught picture of a genuine scene is normally lacking to uncover every one of the points of interest due to under-or over-uncovered locales. In this paper a multi-presentation picture fusion(MEF) calculation by streamlining a target quality measure in particular the MEF auxiliary similitude list (MEF-SSIM). 


In particular, first develop the MEF-SSIM list by enhancing and growing the application extent of the current MEF-SSIM calculation. The last superb picture has little reliance on introductory picture. Trial comes about exhibit the predominance of the proposed technique as far as subjective and target assessment. 

By Sushmitha CM | Meharunnisa SP"An Image Quality Assessment of Multi-Exposure Image Fusion by Improving SSIM"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-4 , June 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd15634.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/15634/an-image-quality-assessment-of-multi-exposure-image-fusion-by-improving-ssim/sushmitha-cm

research publication, ugc approved journals for engineering, special issue publication

Analysis of Power Transfer Capability of a Long Transmission Line Using FACTS Devices


power transfer capability by analyzing and comparing several FACTS devices such as Static Var Compensator (SVC), Static Synchronous Compensator (STATCOM) and Unified Power Flow Controller (UPFC) in long transmission line. These devices have been used in different locations such as sending end, middle and receiving end of transmission line. The suitable location and performance of each model has been analyzed. Firstly, real and reactive power profiles have been studied for uncompensated system and subsequent results are produced. 


Then these results are compared with the results obtained after compensating the system using afore mentioned FACTS devices. Overall analysis indicates that better power (i.e. 87.24% power) has been transferred when SVC is connected at the middle of the transmission line. All simulations have been done in MATLAB/SIMULINK. 

By K. Suneel Goutham | M. Bhaskar Rao | T. Jaganmohan Rao"Analysis of Power Transfer Capability of a Long Transmission Line Using FACTS Devices"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-4 , June 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd15615.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/15615/analysis-of-power-transfer-capability-of-a-long-transmission--line-using-facts-devices/k-suneel-goutham

paper publication for student, paper publication for engineering, conference issue publication