Integrated Renewable Energy System with the use of Battery Energy Storage

Renewable sources like solar, wind, hydro are green resources of energy. They are environment friendly, freely available and promising power generating sources due to their availability and topological advantages for local power generation. This paper will review the status of power generation through renewable sources, government involvement and study of various battery energy storage technologies. technologies. This paper will try to find performance characteristics of battery storage technologies using Simulink. 

By Deepika Dhakad | Abhishek Maurya | Raksha Goyal"Integrated Renewable Energy System with the use of Battery Energy Storage"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11289.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/11289/integrated-renewable-energy-system-with-the-use-of-battery-energy-storage/deepika-dhakad

best journal, manuscript submission, call for paper engineering

Fault Analysis Using Stft and Travelling Wave Method

Current power supplies must give dependable, fantastic power. In this manner, it is vital that a transmission line blame be recognized precisely, dependably and rectified at the earliest opportunity. A strategy for arranging flaw compose in view of brief time Fourier change (STFT) is given in this paper. STFT is a methods for flag preparing in which a Fourier change (FT) is performed by setting a window work with a consistent size. This change is utilized to break down drifters in the power framework. 

This paper breaks down qualities of STFT by utilizing reproduction comes about because of MATLAB and characterizes line blames by blame kind. Precise and quick acknowledgment of transmission line blame area is of incredible criticalness to control framework security. Keeping in mind the end goal to settle the T compose transmission line blame area issue, the wave mode change and wavelet change are utilized to get the wavelet modulus maxima, and after that decide line overvoltage wave entry time, finally figure the blame area as per the blame area equation. 

This paper depicted the guideline of transmission line blame area in light of voyaging waves. The vulnerability of wave speed conveys blunder to blame area in light of voyaging waves. The main heartbeat wave of blame likewise gives numerous trademark data of the disappointment which was utilized to distinguish the sort of disappointments to advantageous the laborers making focused on surge repair. 

By Rajesh Saini | Dr. Deepika Chauhan | Mr. Brijraj Singh"Fault Analysis Using Stft and Travelling Wave Method"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11277.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/11277/fault-analysis-using-stft-and-travelling-wave-method/rajesh-saini

research papers, paper publication for engineering, conference issue publication

Design and Fabrication of Turning Fixture and Drilling Jig for Exhaust Manifold

The successful running of any mass production depends upon the interchangeability to facilitate easy assembly and reduction of unit cost. Mass production methods demand a fast and easy method of positioning work for accurate operations on it. Jigs and fixtures are production tools used to accurately manufacture duplicate and interchangeable parts. Jigs and fixtures are specially designed so that large numbers of components can be machined or assembled identically, and to ensure interchangeability of components. To eliminate marking, punching, positioning, alignments etc. 

It will make easy, quick and consistently accurate locating, supporting and clamping the blank in alignment of the cutting tool. Guidance to the cutting tool like drill, reamer etc. Increase in productivity and maintain product quality consistently. It will reduce operator's labour and skill '“ requirement, Also reduce measurement and its cost .Enhancing technological capacity of the machine tools. Reduction of overall machining cost and also increases in interchangeability. 

By Dr. S. G. Bhatwadekar | Mr. Aditya Arvind Yadav | Mr. Akshay Vilas Arekar | Mr. Sushant Subhash Chougule | Mr. Shrinath Yallapa Shirage | Mr. Yogesh Rajendra Ghodake"Design and Fabrication of Turning Fixture and Drilling Jig for Exhaust Manifold"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd10891.pdf 

Direct URL: http://www.ijtsrd.com/engineering/mechanical-engineering/10891/design-and-fabrication-of-turning-fixture-and-drilling-jig-for-exhaust-manifold/dr-s-g-bhatwadekar

review papers, ugc approved journals for engineering, special issue publication

Current Trends in Smart grid Technology

The draining fuel assets, falling apart natural conditions and regularly expanding power requests make unavoidable the modernization of the power transmission also, dispersion systems. In this paper a short presentation of different parts of smart grid design is given. Understanding the developing significance of Smart Grid advances in the Indian power division, as of late Ministry of Power. Smart Grid pilot extends that are intended to be executed in control circulation area in India 

By Ashok | Praveen Agarwal"Current Trends in Smart grid Technology" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11249.pdf

Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/11249/current-trends-in-smart-grid-technology/ashok

review papers, ugc approved journals for engineering, special issue publication

Extraction of Struvite from Wastewater

The increase in human population need for food production is also increasing day by day. In order to produce healthy organic food depends on the natural fertilizer, so the availability of source for the natural fertilizer production has been decreased. In order to solve the problem without affecting the environment, an eco-friendly and cost-effective fertilizer is in need to be produced. In our project the natural fertilizer can be precipitated from wastewater. 

Nitrogen and Phosphorous in wastewaters are a burning environmental issue of the present world. Wastewater which contains a high amount of phosphorous and nitrogen would be a good source for production of fertilizer. Our project deals with the production of natural fertilizer called Struvite (Magnesium, Ammonium, Phosphorous). Addition of a source of Mg is essential to maintain the favourable condition of PO_4 and Mg crystallization. Struvite is a phosphate-based fertilizer although it contains a significant amount of magnesium and nitrogen, and it is an effective alternative source of rock phosphate to maintain the agricultural food production system. 

This project deals with the extraction of struvite from the wastewater by Electrolysis. Also it consumes less energy and produce considerable amount of struvite which will be helpful in the production of phosphate fertilizer and also reduces the problems dealt with struvite in wastewater treatment plants pipes. The slower nutrient leaching loss and its fertilizer quality make struvite an eco-friendly fertilizer. It is possible to overcome the acute shortage of rock phosphate if all the municipal and livestock wastewaters are connected with the wastewater treatment plants. 

By M. Kamal Nath | G.Karthik | S. Muhaideen Kani | S. Anu Prathap"Extraction of Struvite from Wastewater"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11234.pdf 

Direct URL: http://www.ijtsrd.com/engineering/civil-engineering/11234/extraction-of-struvite-from-wastewater/m-kamal-nath

best journal, manuscript submission, call for paper engineering

Alzheimer Patient Tracking and Alert System

Locating and securing an Alzheimer's patient who is outdoors and in wandering is crucial to an Alzheimer patient safety. Although advances in geo tracking and mobile technology have made locating patients instantly possible, reaching them while in wandering state may take time. However, a social network of caregivers may help shorten the time that it takes to reach and secure a wandering AD patient. This study proposes a new type of intervention based on novel mobile application architecture to form and direct a social support network of caregivers for locating and securing wandering patients as soon as possible. 

System employs, aside from the conventional tracking mechanism, a wandering detection mechanism, both of which operates through a tracking device installed a Subscriber Identity Module for Global System for Mobile Communications Network (GSM). Keywords: Alzheimer Disease (AD), Global System for Mobile Communication (GSM), Global Positioning System (GPS), Mild Cognitive Impairment (MCI), Electronic Geo- Tracking (EGT), Short Message Service (SMS), Radio Frequency Identification (RFID), Secure Digital Card (SD Card), Digital-to-Analog Converter (DAC), Active-Radio Frequency Identification Localization System (ARFIDLS), General Packet Radio Service (GPRS), Real-time Locating Systems (RTLS). 

By Haroon Dar | Shreyansh Jain | Jyoti Shukla | V. M. Sardeshmukh"Alzheimer Patient Tracking and Alert System"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11218.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/11218/alzheimer-patient-tracking-and-alert-system/haroon-dar

research papers, paper publication for engineering, conference issue publication

Security and Privacy Enhancement Framework for Mobile Devices using Active Authentication

The techniques we used to develop and to ensure the separation of enterprise content and personal data on an end-user's device. Although the enterprise manages the environment in which work-related activities are conducted, referred to as a work persons third-party applications installed on the mobile devices may make the enterprise content vulnerable to misuse or exfiltration.An application restriction policy is configured through our Application Restriction Manager (ARM) Policy Manager that allows one to set different restrictions for each installed application. 

Our approach, that we refer to as DroidARM, focuses on post-installation application restriction policies. Such policies dynamically restrict the capabilities of mobile applications at run-time. An application restriction policy is configured through our Application Restriction Manager (ARM) Policy Manager that allows one to set different restrictions for each installed application. 

Adhering to the policy, our ARM system limits the capabilities of an application by restricting access to data and system resources contained within the work persona. Data shadowing is a data and system resource protection technique we have chosen to leverage. We have implemented DroidARM and integrated it into the Android operating system. Our experimental results show that our approach is efficient and effective. 

By S Udith Narayanan | P Vignesh | T Manigandan"Security and Privacy Enhancement Framework for Mobile Devices using Active Authentication"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11175.pdf 

Direct URL: http://www.ijtsrd.com/engineering/computer-engineering/11175/security-and-privacy-enhancement-framework-for-mobile-devices-using-active-authentication/s-udith-narayanan

review papers, ugc approved journals for engineering, special issue publication