Automatic Headlight Control with Central Locking System

Headlights aren't the most complicated tech, even in newer cars with fancy systems like adaptive headlights, but there are a handful of different points of failure that could result in the situation that it describing. The easiest way to keep the battery from dying is to straight up disconnect it. If it never done that before, then it'll just want to make sure that it disconnect the negative cable (typically black) instead of the positive cable (typically red) to avoid even the possibility of a short circuit. 

Once the battery is disconnected, the headlights will turn off, and the battery won't die. The other way to shut the headlights off is to remove the appropriate fuse or relay. This is a little more complicated than disconnecting the battery since you will have to locate the correct fuse panel and then figure out which fuse or relay to pull. It will prevent a loss of power to the computer and radio, though, so you won't have to deal with any fallout later on. 

By Dr. S Senthil Kumar | Sathiyaprakash K | Vijay R | Sudharsan D"Automatic Headlight Control with Central Locking System"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-2 , February 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd8217.pdf  

Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/8217/automatic-headlight-control-with-central-locking-system/dr-s-senthil-kumar

research papers, paper publication for engineering, conference issue publication

Analog CMOS Image Sensor-based Radon Counter

Radon is an invisible, odorless, and chemically inactive radioactive gas produced by the decay of uranium ore. Various types of equipment and components have been proposed for use in effective radon detection. In this paper, we describe a radon detector that uses an analog CMOS image sensor module. Based on our studies, we believe that this system would be helpful in protecting many people from the dangers associated with radon exposure. 

By Chungyong Kim | Gyu-Sik Kim"Analog CMOS Image Sensor-based Radon Counter"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-2 , February 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd8330.pdf  

Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/8330/analog-cmos-image-sensor-based-radon-counter/chungyong-kim

best journal, manuscript submission, call for paper engineering

Effect of Deep Cryogenic Treatment on the Tensile Behavior of AISI 8620 Gear Steel

Life expectancy of mechanical systems is always dependent on the most critical component of the system. Gears represent the most highly stressed parts of a heavy vehicle; these are typically made of AISI 8620 steel. This paper investigates the influence of cryogenic treatment on the tensile properties of hardened tempered AISI 8620 steel. In the current research study, specimens of gear steel (AISI 8620) were hardened at 1193K, tempered at 473K and then cryogenically treated at 88K followed by soft tempering in the oven at 373K for 1hr to relieve cooling stresses. A comparative study on the effects of deep cryogenic treatment (DCT) on hardened tempered specimens and conventional heat treated specimens was made by means of tension testing. 

This test was conducted as per ASTM standard E 8M. The present results confirms that the tensile behavior is marginally reduced after cryogenic treatment for AISI 8620 steel when compared with conventional hardened tempered steel. Stereographic image analysis of the fracture surface indicates the presence of dimples and flat regions are more common in DCT '“ processed material. 

By Prasenjit Ghosh"Effect of Deep Cryogenic Treatment on the Tensile Behavior of AISI 8620 Gear Steel"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-2 , February 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd8303.pdf  

Direct URL: http://www.ijtsrd.com/engineering/mineral-and-metallurgical-engineering/8303/effect-of-deep-cryogenic-treatment-on-the--tensile-behavior-of-aisi-8620-gear-steel/prasenjit-ghosh

review papers, ugc approved journals for engineering, special issue publication

Security System for Car using CAN Protocol

The design consist of a central "Airbag control unit"(ACU) controls a number of related sensors within the vehicle like accelerometers, impact sensors, wheel speed sensors, gyroscopes, brake pressure sensors, and seat occupancy sensors. When the requisite 'threshold' has been reached or exceeded, the airbag control unit will trigger the ignition of a gas generator propellant to rapidly inflate a nylon fabric bag. 

The inflated airbag reduces the deceleration experienced by the passenger during the crash through the process of venting gas out of small vent holes in a controlled manner absorbing the energy of the occupant impacting the bag. CAN is a serial communication protocol. The CAN bus may be used in vehicles to connect engine control unit and transmission , or (on a different bus) to connect the door locks , climate control , seat control. 

By Poonam Bedarkar | Atul Halmare"Security System for Car using CAN Protocol"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-2 , February 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd8272.pdf  

Direct URL: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/8272/security-system-for-car-using-can-protocol/poonam-bedarkar

high impact factor, ugc approved journals for engineering, special issue publication

Occupancy-based Surveillance with Wireless Camera Network for Public Safety: Creating Safe Places with Internet of Things to Live in Urban

The monitoring of public areas with video cameras is becoming increasingly important due to the security concern around the world. Real-time surveillance of people and their activities in urban environments is becoming increasingly important in the context of public safety. The advance of wireless technologies has expanded the scope and capabilities of camera networks, which now can be used as intelligent platforms to provide public safety. This paper aims to present an occupancy-based surveillance system at the intersection of Internet of Things and wireless camera networks. 

By Hakki Soy | Yüksel Çelik"Occupancy-based Surveillance with Wireless Camera Network for Public Safety: Creating Safe Places with Internet of Things to Live in Urban"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd8302.pdf  

Direct URL: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/8302/occupancy-based-surveillance-with-wireless-camera-network-for-public-safety-creating-safe-places-with-internet-of-things-to-live-in-urban/hakki-soy

international peer reviewed journal, paper publication for engineering, conference issue publication

Real time ECG Monitoring: A Review

Day by day the scope & use of the electronics concepts in bio-medical field is increasing step by step. In this paper the review of newly developed concepts is done for the monitoring of the ECG signal. This paper also reviews a power and area efficient electrocardiogram (ECG) acquisition and signal processing application sensor node. Further the study of IoT frame work for ECG monitoring has been carried out. 

By Ms. Dhanashri Yamagekar | Dr. Pradip Bhaskar"Real time ECG Monitoring: A Review"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd7065.pdf  

Direct URL: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/7065/real-time-ecg-monitoring-a-review/ms-dhanashri-yamagekar

high impact factor, ugc approved journals for engineering, special issue publication

A Review on System-on-Chip (SoC) Designs for Real-Time Industrial Application

Now-a-days System-on-a-chip (SoC) technology is used in small, increasingly complex consumer electronic devices. A system-on-a-chip (SoC) is a microchip with all the necessary electronic circuits and parts for a given system, such as a Smartphone or wearable computer, on a single integrated circuit (IC). Day by day the scope & use of the electronics concepts in industrial field is increasing step by step. In this paper the review of newly developed concepts is done for the SoC design for real time industrial application. 

This paper also reviews a power and area efficient for industrial application. Further the study of SoC designs for real time industrial application has been carried out. 

By Mr. Abhijit Patil | Mr. A. A. Shirolkar"A Review on System-on-Chip (SoC) Designs for Real-Time Industrial Application"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd7077.pdf  

Direct URL: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/7077/a-review-on-system-on-chip-soc-designs-for--real-time-industrial-application/mr-abhijit-patil

manuscript publication, submit paper online, indexed journal