Experimental Study of a Wi-Fi Module for Radon Data Communication

Radon is an invisible, odorless, and chemically inactive radioactive gas produced by the decay of uranium ore. Various types of equipment and components have been proposed for use in effective radon detection. In this paper, we describe a radon detector that uses a PIN photodiode radon-sensor module and a Wi-Fi-based radon monitoring system. Based on our studies, we believe that this system would be helpful in protecting many people from the dangers associated with radon exposure. 

By Chungyong Kim | Gyu-Sik Kim"Experimental Study of a Wi-Fi Module for Radon Data Communication"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd8277.pdf  

Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/8277/experimental-study-of-a-wi-fi-module--for-radon-data-communication/chungyong-kim

review papers, ugc approved journals for engineering, special issue publication

Vehicle Safety Speed Controller under Driver Fatigue Using Eye Blink Sensor

Accidents occurred at night time are mainly due to carelessness of human being such as sleepiness. To avoid that we design and develop a control system based on intelligent electronically controlled automotive braking system. It consists of IR transmitter and receiver circuit, control unit, pneumatic breaking system. The IR sensor is used to monitor the eye blink movement. If the eye blink movement varies beyond the normal condition set (3 sec); the IR sends the control signal to the breaking system through electronic control unit (ECU). Thus the pneumatic breaking system is used to break the system and alerts the driver to not sleep. From this accidents can prevent before it occurs. 

By Chandra Mohan M | Arivazhagan. A"Vehicle Safety Speed Controller under Driver Fatigue Using Eye Blink Sensor"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd7130.pdf  

Direct URL: http://www.ijtsrd.com/engineering/computer-engineering/7130/vehicle-safety-speed-controller-under--driver-fatigue-using-eye-blink-sensor/chandra-mohan-m

high impact factor, ugc approved journals for engineering, special issue publication

IOT based Smart Home Automation for Car Theft Prevention using Image Processing

This paper introduces car theft prevention using Face recognition in IoT base Home automation. Internet of things is of connecting of all the devices such as sensors actuators and other embedded devices through communication protocol. Iot is used in Home Automation for controlling Home appliances such as controlling home door, getting information about room temperature gas leakage and fire alarm notification in home from anywhere in the world. 

Nowadays car theft prevention is important to keep our Car secure and safe in Home this paper uses automatic gate open lock system to secure the car in home using controllers and RFID Transmitter and Receiver. Face Recognition System is used to get the accuracy in images of a person check the person entering in home and the person trying to drive a car is authorized or unauthorized. 

By R. Tharani | Dr. M. Newlin Rajkumar | P. R. Harshani | S. Rajalakshmi"IOT based Smart Home Automation for Car Theft Prevention using Image Processing"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd8259.pdf  

Direct URL: http://www.ijtsrd.com/engineering/computer-engineering/8259/iot-based-smart-home-automation-for-car-theft--prevention-using-image-processing/r-tharani

peer reviewed journals, manuscript submission, call for paper engineering

A Review on Implementation of Parallel Prefix Adders using FPGA'S

The paper mainly used in the implementation of parallel prefix adders using FPGA'S. The carry-tree adders constitute spanning tree adder, sparse Kogge-Stone & Kogge-Stone adder. It also presents a representation of the carry skip adder. The best resolution of the VLSI system is obtained by the Prefix adders. Thus the implementation of the block diagram is difficult so the FPGA technology is used instead. They produce the high efficiency of the layout using the FPGA analysis. 

Better delay and performance of the RCA design in the 128 bits in the use of the fast-chain array. Xilinx Spartan 3E is used in the implementation of the design. RCA is most commonly used in the implementation of the full adder and half adder. RCA is a serial which can perform many number of the addition but due to some situation delay occurs. Xilinx ISE is used in the simulation of the design. 

S. Lakshmipriya"A Review on Implementation of Parallel Prefix Adders using FPGA'S"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd7165.pdf  

Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/7165/a-review-on-implementation-of-parallel-prefix-adders-using-fpga's/s-lakshmipriya

paper publication, submit paper online, indexed journal

Smart Fruit Classification using Neural Networks

The objective of this project is to develop a system that helps the food industry to classify fruits based on specific quality features. Our system will give best performance when used to sort some brand of fruits. The fruit industry plays a vital role in a country's economic growth. They account for a fraction of the agricultural output produced by a country. It forms a part of the food processing industry. Fruits are a major source of energy, vitamins, minerals, fiber and other nutrients. They contribute to an essential part of our diet. Fruits come in varying shapes, color and sizes. Some of them are exported, thereby yielding profit to the industry. 

By K. Sandhiya | M. Vidhya | M. Shivaranjani | S. Saranya"Smart Fruit Classification using Neural Networks"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd6986.pdf  

Direct URL: http://www.ijtsrd.com/engineering/computer-engineering/6986/smart-fruit-classification-using-neural-networks/k-sandhiya

open access journal of engineering, ugc approved journals for engineering, special issue publication

Chaos Suppression and Practical Stabilization of Uncertain Generalized Duffing-Holmes Control Systems with Unknown Actuator Nonlinearity

In this paper, the concept of practical stabilization for nonlinear systems is introduced and the practical stabilization of uncertain generalized Duffing-Holmes control systems with unknown actuator nonlinearity is explored. Based on the time-domain approach with differential inequalities, a single control is presented such that the practical stabilization for a class of uncertain generalized Duffing-Holmes systems with unknown actuator nonlinearity can be achieved. 

Moreover, both of the guaranteed exponential convergence rate and convergence radius can be correctly calculated Finally, some numerical simulations are given to demonstrate the feasibility and effectiveness of the obtained results. 

By Yeong-Jeu Sun"Chaos Suppression and Practical Stabilization of Uncertain Generalized Duffing-Holmes Control Systems with Unknown Actuator Nonlinearity"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd8220.pdf  

Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/8220/chaos-suppression-and-practical-stabilization-of-uncertain-generalized-duffing-holmes-control-systems-with-unknown-actuator-nonlinearity/yeong-jeu-sun

international journals in engineering, paper publication for engineering, conference issue publication

Runoff Prediction of Gharni River Catchment of Maharashtra by Regressional Analysis and Ann Tool Box

The present study deals with the prediction of runoff of a river catchment of maharastra by using linear regressional analysis and self organizing maps by handling numerical data. The prediction is done by using past data record. A mathematical model has been developed for rainfall runoff correlation. 

By Warish Khan | Adil Masood | Najib Hasan"Runoff Prediction of Gharni River Catchment of Maharashtra by Regressional Analysis and Ann Tool Box" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd7025.pdf  

Direct URL: http://www.ijtsrd.com/engineering/civil-engineering/7025/runoff-prediction-of-gharni-river-catchment-of-maharashtra-by-regressional-analysis-and-ann-tool-box/warish-khan

review papers, ugc approved journals for engineering, special issue publication