IOT based Smart Home Automation for Car Theft Prevention using Image Processing

This paper introduces car theft prevention using Face recognition in IoT base Home automation. Internet of things is of connecting of all the devices such as sensors actuators and other embedded devices through communication protocol. Iot is used in Home Automation for controlling Home appliances such as controlling home door, getting information about room temperature gas leakage and fire alarm notification in home from anywhere in the world. 

Nowadays car theft prevention is important to keep our Car secure and safe in Home this paper uses automatic gate open lock system to secure the car in home using controllers and RFID Transmitter and Receiver. Face Recognition System is used to get the accuracy in images of a person check the person entering in home and the person trying to drive a car is authorized or unauthorized. 

By R. Tharani | Dr. M. Newlin Rajkumar | P. R. Harshani | S. Rajalakshmi"IOT based Smart Home Automation for Car Theft Prevention using Image Processing"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd8259.pdf  

Direct URL: http://www.ijtsrd.com/engineering/computer-engineering/8259/iot-based-smart-home-automation-for-car-theft--prevention-using-image-processing/r-tharani

peer reviewed journals, manuscript submission, call for paper engineering

A Review on Implementation of Parallel Prefix Adders using FPGA'S

The paper mainly used in the implementation of parallel prefix adders using FPGA'S. The carry-tree adders constitute spanning tree adder, sparse Kogge-Stone & Kogge-Stone adder. It also presents a representation of the carry skip adder. The best resolution of the VLSI system is obtained by the Prefix adders. Thus the implementation of the block diagram is difficult so the FPGA technology is used instead. They produce the high efficiency of the layout using the FPGA analysis. 

Better delay and performance of the RCA design in the 128 bits in the use of the fast-chain array. Xilinx Spartan 3E is used in the implementation of the design. RCA is most commonly used in the implementation of the full adder and half adder. RCA is a serial which can perform many number of the addition but due to some situation delay occurs. Xilinx ISE is used in the simulation of the design. 

S. Lakshmipriya"A Review on Implementation of Parallel Prefix Adders using FPGA'S"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd7165.pdf  

Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/7165/a-review-on-implementation-of-parallel-prefix-adders-using-fpga's/s-lakshmipriya

paper publication, submit paper online, indexed journal

Smart Fruit Classification using Neural Networks

The objective of this project is to develop a system that helps the food industry to classify fruits based on specific quality features. Our system will give best performance when used to sort some brand of fruits. The fruit industry plays a vital role in a country's economic growth. They account for a fraction of the agricultural output produced by a country. It forms a part of the food processing industry. Fruits are a major source of energy, vitamins, minerals, fiber and other nutrients. They contribute to an essential part of our diet. Fruits come in varying shapes, color and sizes. Some of them are exported, thereby yielding profit to the industry. 

By K. Sandhiya | M. Vidhya | M. Shivaranjani | S. Saranya"Smart Fruit Classification using Neural Networks"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd6986.pdf  

Direct URL: http://www.ijtsrd.com/engineering/computer-engineering/6986/smart-fruit-classification-using-neural-networks/k-sandhiya

open access journal of engineering, ugc approved journals for engineering, special issue publication

Chaos Suppression and Practical Stabilization of Uncertain Generalized Duffing-Holmes Control Systems with Unknown Actuator Nonlinearity

In this paper, the concept of practical stabilization for nonlinear systems is introduced and the practical stabilization of uncertain generalized Duffing-Holmes control systems with unknown actuator nonlinearity is explored. Based on the time-domain approach with differential inequalities, a single control is presented such that the practical stabilization for a class of uncertain generalized Duffing-Holmes systems with unknown actuator nonlinearity can be achieved. 

Moreover, both of the guaranteed exponential convergence rate and convergence radius can be correctly calculated Finally, some numerical simulations are given to demonstrate the feasibility and effectiveness of the obtained results. 

By Yeong-Jeu Sun"Chaos Suppression and Practical Stabilization of Uncertain Generalized Duffing-Holmes Control Systems with Unknown Actuator Nonlinearity"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd8220.pdf  

Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/8220/chaos-suppression-and-practical-stabilization-of-uncertain-generalized-duffing-holmes-control-systems-with-unknown-actuator-nonlinearity/yeong-jeu-sun

international journals in engineering, paper publication for engineering, conference issue publication

Runoff Prediction of Gharni River Catchment of Maharashtra by Regressional Analysis and Ann Tool Box

The present study deals with the prediction of runoff of a river catchment of maharastra by using linear regressional analysis and self organizing maps by handling numerical data. The prediction is done by using past data record. A mathematical model has been developed for rainfall runoff correlation. 

By Warish Khan | Adil Masood | Najib Hasan"Runoff Prediction of Gharni River Catchment of Maharashtra by Regressional Analysis and Ann Tool Box" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd7025.pdf  

Direct URL: http://www.ijtsrd.com/engineering/civil-engineering/7025/runoff-prediction-of-gharni-river-catchment-of-maharashtra-by-regressional-analysis-and-ann-tool-box/warish-khan

review papers, ugc approved journals for engineering, special issue publication

A Review on use of Damping Materials to Reduce Vibrations during Turning in Lathe Machine

Vibration in metal cutting is familiar to every machine tool operator. This phenomenon is recognized in operations such as internal turning, threading, grooving, milling, boring and drilling, to which there are several reasons why this problem occurs. Some are related to the machine tool itself, to the clamping of the tool, the length and diameter of the tool holder and the cutting data to be used. More of this will be discussed later. There will be several different actions to consider when solving this problem. Reducing the process parameters is one such consideration, however, this could have a negative effect on productivity. Our focus, therefore, will be easy hands on recommendations for productive solutions and easy to use products. 

This strategy will be emphasized throughout this guide, which will also contain useful information relating to the tool holder e.g. clamping methods, extensions and the types of inserts that can be used. The aim, with this paper on hand, is to study the role packing materials below the tool shank in reducing vibrations produced during turning process. The paper studies and reviews various techniques proposed for vibration reduction and further proposes a methodology to carry out an experiment in this regard. 

By Mr. Taware Sachin B. | Prof. Mundhe Vyankatesh L."A Review on use of Damping Materials to Reduce Vibrations during Turning in Lathe Machine"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd8218.pdf  

Direct URL: http://www.ijtsrd.com/engineering/mechanical-engineering/8218/a-review-on-use-of-damping-materials-to-reduce-vibrations-during-turning-in-lathe-machine/mr-taware-sachin-b

research papers, paper publication for engineering, conference issue publication

Experimental Study on Voided Biaxial Slab and its Application

Slab is largest member which consumes concrete. If the load acting on the slab is large or clear span between columns is more, the thickness of slab increases. It leads to consume more material such as concrete and steel due to this, self-weight of slab is increased. To avoid these disadvantages voided slab system is used. Reinforced concrete slab with plastic voids is a new and innovative type of construction. 

It is developed to allow for lighter self-weight of the structure while maintaining similar load carrying capacity of a solid slab. High density polyethylene (HDPE) hollow spheres replace the ineffective concrete from the centre of the slab and decrease the dead load. The advantages are less energy consumption both in production and transport, less emission of exhaust gases from production and transport, especially CO2 and reduce the material, the load, lower the cost and it is also a Green Technology. The Bubble deck slab floor system can be used for storey, roof and ground floor slabs. The effect is to decrease the overall weight by as much as 35% when compared to a solid slab of the same bearing capacity. 

By Snehal Kitture | Nakul Kabra | Hemant Ahire | Jayesh Burad | Swapnil Kate"Experimental Study on Voided Biaxial Slab and its Application"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd7153.pdf  

Direct URL: http://www.ijtsrd.com/engineering/civil-engineering/7153/experimental-study-on-voided-biaxial-slab-and-its-application/snehal-kitture

best journal, manuscript submission, call for paper engineering