Saturday, November 25, 2017

Role of Panchayats in planning and implementation of Right to Work: A study of MGNREGA in District Budgam in Jammu & Kashmir

The Act known as National Rural Employment Guarantee Act (NREGA) created a justifiable 'Å“Right to work' for all households in rural India. This Act renamed as the Mahatma Gandhi National Rural Employment Guarantee Scheme (MGNREGS) is an unprecedented intervention by the Government in reforming and reenergizing the (rural) labour market both by way of correcting the prevailing anomalies and in providing livelihood security to millions of rural poor.

In conflict-ridden Kashmir's rural areas that are caught in widespread poverty, vulnerability and lack of basic infrastructure, the launching of the NREGA brought a lot of hope and optimism. As in Kashmir society most of the rural poor are largely dependent on the prospects of agriculture sector which is facing the problems of productivity in absolute and relative terms in contemporary times because of climatic and other environmental and socio-cultural concerns. Thus the promised 100 days of guaranteed wage employment per household per annum at the stipulated minimum wages has not only reduced the rampant under and unemployment in Kashmir's rural areas, but also impacted the stagnant wage structure for the rural unskilled workers. MGNREGA is also a glaring example which has ensured community participation in planning, implementation, monitoring and evaluation (Social Audit).

It also aims at enabling the local bodies to move towards good governance through the transparency, accountability and participatory mechanisms. Even the efficacy of the institutional performance and active participation of the community determine the overall effectiveness of NREGS. However, after more than half a decade of policy implementation the only major available information source about the state '“ the 'Å“Government official figures' '“ do not show a healthy picture when compared to other parts of India and generate a lot of questions and ambiguity, addressing the dearth of ground level literature, which could have explained the myths and realities behind the fluctuating and comparatively low performing official estimates. This paper is a modest attempt in this direction to highlight the feasibility and contextual dilemmas of the MGNREGA in Kashmir with an empirical study of one of the most backward Districts of the Valley i.e. District Budgam.

It also analyses the official figures and their limitations and provides field reflections on some of the limitations in the proper implementation of the scheme. In addition to this it highlights the issues and challenges in the smooth functioning of the Panchayat Raj Institutions in the proper implementation of the scheme. The study has been carried out with a proper scientific methodology, and to elicit the relevant information the researchers have employed non participant observation and interviews with the stakeholders as key research methods. In summation from this study policy conclusions can be drawn based on a general analysis of the set-up, past experience and the findings from the field study

By Dr. Gazala Firdoss"Role of Panchayats in planning and implementation of Right to Work: A study of MGNREGA in District Budgam in Jammu & Kashmir"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd7058.pdf  

Direct URL: http://www.ijtsrd.com/engineering/chassis-engineering/7058/role-of-panchayats-in-planning-and-implementation-of-right-to-work--a-study-of-mgnrega-in-district-budgam-in-jammu-and-kashmir/dr-gazala-firdoss

review papers, ugc approved journals for engineering, special issue publication

Calibration of Environmental Sensor Data Using a Linear Regression Technique


The linear regression is a linear approach for modeling the relationship between a scalar dependent variable y and one or more explanatory variables denoted X. A linear regression analysis method is used to improve the performance of the instruments using light scattering method. The data measured by these instruments have to be converted to actual PM10 concentrations using some factors. These findings propose that the instruments using light scattering method can be used to measure and control the PM10 concentrations of the underground subway stations. 

In this study, the reliability of the instrument for PM measurement using light scattering method was improved with the help of a linear regression analysis technique to continuously measure the PM10 concentrations in the subway stations. In addition, the linear regression analysis technique was also applied to calibrate a radon counter with the help of an expensive radon measuring apparatus. 


By Chungyong Kim | Gyu-Sik Kim"Calibration of Environmental Sensor Data Using a Linear Regression Technique"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd7060.pdf  

Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/7060/calibration-of-environmental-sensor-data-using-a-linear-regression-technique/chungyong-kim

research papers, paper publication for engineering, conference issue publication

Serial Manipulator Design for an AG-Robot

At present observation all the industries are looking at Robotization, to increase productivity and quality. The industrial robots of today may not look the least bit like a human being although all the research is directed to provide more and more anthropomorphic and humanlike features and super-human capabilities. in these Robots can perform desired tasks in unstructured environments without continuous human guidance. Many kinds of robots are autonomous to some degree. In this paper explains about pick and Place Robot design with agriculture application which runs on human guidance. For this two servo motors are used to control the robot.

Micro Control of the robotic arm has been achieved successfully by using servo motors or dc motors. The microcontrollers implement inverse kinematics algorithms and implement position control on the motors.

By Mr.K. Rajesh"Serial Manipulator Design for an AG-Robot"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd6979.pdf  

Direct URL: http://www.ijtsrd.com/engineering/mechanical-engineering/6979/serial-manipulator-design-for-an-ag-robot/mrk-rajesh

review papers, ugc approved journals for engineering, special issue publication

Improving the Performance of PEM Fuel Cell by Varying the Number of Flow Channels

A fuel cell is a device that converts chemical energy into electrical energy, water, and heat through electrochemical reactions. The water formation cause major problem and it affects performance of fuel cell. In PEM fuel cell excess and least amount of water level may reduces the performance and the efficiency of the fuel cell. The performance of PEM fuel cell mainly depends on flow parameters and design parameters. In this project, the number of pass of serpentine type flow channel was varied and their performances were calculated. 

The complete model of PEM fuel cell with single, two & three pass serpentine type flow channels were modeled using SOLID WORKS & AUTOCAD software packages, the surface meshing was done using ANSA software, volume meshing was done using TGRID software and analysis was done using ANSYS FLUENT 13.0 software. From the analysis, it was found that the three pass serpentine type flow channel gave better performance, when compared to single pass and two pass flow channels. 

By M. Saravanan | R. Girimurugan"Improving the Performance of PEM Fuel Cell by Varying the Number of Flow Channels"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd5975.pdf  

Direct URL: http://www.ijtsrd.com/engineering/mechanical-engineering/5975/improving-the-performance-of-pem-fuel-cell-by--varying-the-number-of-flow-channels/m-saravanan

research papers, paper publication for engineering, conference issue publication

Performance Test on the C.I Engine by using Different Biofuels

On the face of the upcoming energy crisis, vegetable oils have come up as a promising source of fuel. They are being studied widely because of their abundant availability, renewable nature and better performance when used in engines. Many vegetable oils have been investigated in compression ignition engine by fuel modification or engine modification. The vegetable oils have very high density and viscosity, so we have used the methyl ester of the oil to overcome these problems. Their use in form of methyl esters in non-modified engines has given encouraging results.Coconut oil (copra), Waste vegetable oil, Karanja oil (Pongamia Pinnata) is available abundantly in India.

An experimental investigation was made to evaluate the performance characteristics and overall emissions of a diesel engine using different blends of these three methyl esters with mineral diesel. Methyl esters of these three oils were blended with diesel in proportions of 20% and 40% by mass and studied under various load conditions in a compression ignition (diesel) engine. The performance parameters were found to be very close to that of mineral diesel.

The brake thermal efficiency and mechanical efficiency were better than mineral diesel for some specific blending ratios under certain loads. The emission characteristics were also studied and levels of carbon dioxide, carbon monoxide, nitric oxide and hydrocarbons were found to be higher than pure diesel.

By T. Pratheep Reddy | P. Charan Theja | B. Eswaraiah | J. Narendra Kumar"Performance Test on the C.I Engine by using Different Biofuels"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd7044.pdf  

Direct URL: http://www.ijtsrd.com/engineering/mechanical-engineering/7044/performance-test-on-the-ci-engine-by-using--different-biofuels/t-pratheep-reddy

manuscript publication, submit paper online, indexed journal

Emerging Trends in Electoral System: Revolutionary Transformation through the Information Technology

70 Years Independent India's largest democracy operate through the Periodic elections. In this paper explaining electoral reforms through the information technology (IT) and Transformation of electoral management in India. This paper mainly analyses the entire IT role in the election system and the main intervention of revolutionary transformation of free and fair elections.

Moreover, the paper explaining role of 21st century Indians electoral system in citizen and voters services, electoral management, transparency and political party's participation. Information Communication Technology (ICT) developed many applications in electoral management. In addictions this paper analyse these Applications and Its Working Style.

This paper explaining the importance of electronic voting machines (EVM) and the transformation of EVM system. In addition, paper explaining the emerging trends in EVM machines recent proposal of VVPATs. Analysing advantages and significances the Revolution implication of NOTA. Information Technology will soon be seeking free and fair elections of the Indian electoral system.

By Kolapuri Chandrashekar"Emerging Trends in Electoral System: Revolutionary Transformation through the Information Technology"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd5968.pdf  

Direct URL: http://www.ijtsrd.com/engineering/chassis-engineering/5968/emerging-trends-in-electoral-system-revolutionary--transformation-through-the-information-technology/kolapuri-chandrashekar

high impact factor, ugc approved journals for engineering, special issue publication

A Study of Reducing Harmonic Instability and Reasonable Problems in PMSG based Wind Forms

Unlike conventional power systems where harmonic resonances are coming from passive inductive and capacitive elements, large-scale power electronic systems like wind farms present a more complex system, where the fast dynamics of the power electronic converters may present an inductive or capacitive behavior. Therefore, the interactions between the fast controllers of the power converters and the passive elements may lead to harmonic instability and new resonances at various frequencies.

This paper presents an optimum design technique for the Wind Turbine (WT) inner controllers in a PMSG based wind farm in order to reduce the number of resonances and to mitigate harmonic instability. In the approach, a PMSG based wind farm is modeled as a Multi-Input Multi-Output (MIMO) dynamic system by modeling the high bandwidth control loops of the power converters.

Resonance frequencies and oscillatory modes of the wind farm are identified based on the MIMO matrix. Afterwards, a multi-objective optimization procedure based on Genetic Algorithm (GA) is proposed to put the oscillatory modes of the wind farm in suitable locations in order to minimize the number of the resonances and to guarantee a stable operation of the wind farm. A 400-MW wind farm is studied in the PSCAD/EMTDC software environment to confirm the validity of the proposed optimum design technique.

By Gangadhara Swamy | Molugu Shruthi"A Study of Reducing Harmonic Instability and Reasonable Problems in PMSG based Wind Forms"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

URL: http://www.ijtsrd.com/papers/ijtsrd7028.pdf  

Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/7028/a-study-of-reducing-harmonic-instability-and-reasonable--problems-in-pmsg-based-wind-forms/gangadhara-swamy

international peer reviewed journal, paper publication for engineering, conference issue publication