Ways of Utilization of Dust from Cement Plants

The article discusses the properties of crushed stone lime asphalt concrete and the conditions for obtaining a high quality road surface during its application. The results of the study of replacing mineral powder in crushed stone asphalt concrete with dust, dust from cement plants and dust from pyrite slag, as well as a study of the stability of the quality of bitumen in time to normal and high temperatures are described. However, the selected areas of using cement plant dust cannot be considered particularly promising, since in the above methods, cement plant dust is easily replaced by chalk and limestone. In this regard, it is more promising to use dust from cement plants to obtain nitrogen calcium fertilizers, mainly containing calcium nitrate. 

by Xidirova Yulduz Xo’janazarovna | Rosilov Mansur Sirgievich | Badalova N "Ways of Utilization of Dust from Cement Plants" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd40001.pdf 

Paper URL: https://www.ijtsrd.com/engineering/chemical-engineering/40001/ways-of-utilization-of-dust-from-cement-plants/xidirova-yulduz-xo’janazarovna

callforpapertechnology, technologyjournal

Review on Design and Analysis of Front Bumper

Proper design of front bumper is essential in safeguarding engine bay during low impact collisions. The energy absorption characteristics of bumpers should be good enough to absorb impact energy without causing any damage to internal parts. The current research studies the various analysis conducted on front bumper using numerical and experimental techniques to determine the effect of various composite materials, high strength sheet moulding compounds and reinforced rib on improving energy absorption characteristics of bumper. 

by J Chakravarthi | Dr. Alok Sharma "Review on Design & Analysis of Front Bumper" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd39989.pdf 

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/39989/review-on-design-and-analysis-of-front-bumper/j-chakravarthi

callforpaperarts, artsjournal, peerreviewedjournal 

Analysis and Simulation of Solar PV Connected with Grid Accomplished with Boost Converter and PWM Based Inverter

This paper deals with a solar PV array connected with grid system. This system consists of PV cells with 30 KW system, Boost converter, three phase inverter with suitable control system and three phase load. This paper gives analysis of each components of the system. The output voltage from the solar PV cells are variable according to radiation intensity and temperature so in order to connect with grid the output voltage should be fixed and converted to AC voltage and this job will be done by an inverter. A very effective control system has been developed for the inverter based on pulse width modulation. This paper presents an intensive performance and dynamic behavior of a grid related PV energy conversion system. The PV system is developed and simulated with the help of MATLAB Simulink software environment. 

by Abhishek Verma | Dr. Anup Mishra | Brahma Nand Thakur "Analysis and Simulation of Solar PV Connected with Grid Accomplished with Boost Converter and PWM Based Inverter" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd40056.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/40056/analysis-and-simulation-of-solar-pv-connected-with-grid-accomplished-with-boost-converter-and-pwm-based-inverter/abhishek-verma

callforpaperpapersinjournals, multidisciplinaryjournal

Design, Development, Fabrication and Testing of Small Vertical Axis Wind Turbinev

An experimental investigation has been carried has been carried out on a design, Development, Fabrication, and Testing of small Vertical axis wind turbine. An extremely simple design, of a vertical axis wind rotor using two flat vertical Vanes, swinging vanes has been fabricated and tested to obtain its performance. The torque and power coefficient have been obtained and presented in this paper the result are highly encouraging and indicate the usefulness of the swinging vane rotor at low wind regions. This paper is presented on the basis of technology two blade vertical axis wind turbine system. 

by Dr. Mukesh Kumar Lalji "Design, Development, Fabrication and Testing of Small Vertical Axis Wind Turbinev" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd39817.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/39817/design-development-fabrication-and-testing-of-small-vertical-axis-wind-turbinev/dr-mukesh-kumar-lalji

callforpapereconomics, economicsjournal