Experimental Study on Performance of Gap Graded Concrete using Partial Replacement of Titanium Dioxide and Msand

This paper reports an experimental investigation on the development of Gap graded concrete providing the optimal combination of strength and water permeability using M sand and admixtures. In this study, the Gap graded concrete is obtained by removing the fine aggregate wholly 0 , 5 , 10 and 15 of replacing coarse aggregate with M sand. The titanium dioxide is used as partial replacement to cement to study its behavior on mechanical properties of Gap graded concrete. 

Gap graded concrete trial mixes with different size of aggregate, with and without fine aggregates. Tested for its mechanical properties such as compressive strength, water permeability, and porosity. Gap graded concrete is a porous concrete which allows water and air to pass through it. The Gap graded concrete specimen of cube size of 150mm x 150mm x 150mm and they were cured in water for the period of 7, 14, 28 days. The compressive strength test and permeability is done in laboratory after curing. Then the compressive strength of Gap graded concrete is compared to the compressive strength of M20grade of concrete. 

By Angel Benish M | Uma Nambi J "Experimental Study on Performance of Gap Graded Concrete using Partial Replacement of Titanium Dioxide and Msand"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-2 , February 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd21515.pdf

Pepar URL: https://www.ijtsrd.com/engineering/civil-engineering/21515/experimental-study-on-performance-of-gap-graded-concrete-using-partial-replacement-of-titanium-dioxide-and-msand/angel-benish-m

ugc approved engineerig journal, engineering journal, technology journal