Design Development and Analytical Process of Small Vertical Axis Wind Turbine

The speed of wind in meter per second. Sensor plays an important role in censoring the velocity of wind. The design and fabrication operations, we evaluate the performance of machine through the show experimental setup. Experimental setup consists assembly of various component and equipment already described at initial phase. Blower, Anemometer and sensor are other equipment for facilitation of procedure. When we start the blower, the wind velocity strikes the blades of rotor, which start rotating due to its effect. 

by Dr. Mukesh Kumar Lalji "Design Development & Analytical Process of Small Vertical Axis Wind Turbine" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd39873.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/39873/design-development-and-analytical-process-of-small-vertical-axis-wind-turbine/dr-mukesh-kumar-lalji

ugcapprovedjournalswithlowpublicationfees

Modelling and Analysis of High Rise Structure Using Different Shapes of RC Shear Wall for High Seismic Zone Using Flat Slab

RCC walls including shear walls are the usual multi Storied Buildings requirements. In past researches high rise structure without RC Shear Wall is not safe for earthquake force. No comparative analysis of structures on seismic behavior of high rise structure by using of RC Shear wall with flat slab. Present work is comparative study of the behaviour of high rise 16 Storey buildings with and without RC Shear wall using flat slab. Modelling and Analysis of high rise structure using STAAD PRO V8i Software. STAAD PRO software which is based on the application of Finite Element Method. This software is a widely used in the field of structural design and analysis. Now a day this software is very much friendly for the analysis of different type of structures and to calculate the result at every node and element wise. Here three cases are consider for study 16 Storey buildings and analysis displacement, shear force and bending moments generated in structure with and without RC Shear wall using flat slab. 

by Aakanksha Vaman Chaudhari | Nitesh Kushwaha | Prof. Afzal Khan "Modelling and Analysis of High Rise Structure Using Different Shapes of RC Shear Wall for High Seismic Zone Using Flat Slab" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd41121.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/41121/modelling-and-analysis-of-high-rise-structure-using-different-shapes-of-rc-shear-wall-for-high-seismic-zone-using-flat-slab/aakanksha-vaman-chaudhari

callforpaperinternationaljournal, ugclistofjournals, bestinternationaljournal 

Security Enhancement and Eminent Verification Measures of Global Distinctive E Passport

Electronic Passport is one of the results of the electronic revolution in The World since the passport is the document of the person in terms of identity and nationality and is the property of the country. One of the most important Challenges is to protect this document from forgery. The common forgery for the Passport is replacing its holder photo. The proposed system concentrates on the Security part of the e passport. It consists of two parts the first part is hiding of the security code by using steganography and storing the same code in the issuing Country of the e passport. The other part will be operated at the control point of the destination country to make sure of the e passport validity by checking the Hidden code using NFC and verify it with the one. If the two values are equal, then the system will compute a key using Diffie Hellman Key Exchange. This Key will be used to read the secret information. The project designed is an Authentication system where the Passport holder is authorized through Technology. Electronic passports include contactless chip which stores personal Data of the passport holder, information about the passport and the issuing Institution. In its simplest form an electronic passport contains just a collection of Read only files, more advanced variants can include sophisticated cryptographic Mechanisms protecting security of the document and or privacy of the passport Holder. 

by Dr. R. Mohana Priya | V. Bharanitharan | S. Clementinbaraj | R. Kirubaharan "Security Enhancement and Eminent Verification Measures of Global Distinctive E-Passport" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd41101.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/41101/security-enhancement-and-eminent-verification-measures-of-global-distinctive-epassport/dr-r-mohana-priya

internationaljournalsofcomputerscience, callforpapercomputerscience, ugcapprovedjournalsforcomputerscience

An Analysis of Mechanical Properties and Flexural Behavior of Concrete Slabs Reinforced with H.F.R.P Reinforcements

In the era of concrete, concrete is exposed to chemical, such as carbonation and chloride adulteration break down the alkaline barrier in the cement. Subsequently, steel in the concrete becomes corrosive. Such phenomena lead to erosion of concrete at the reinforcement level, cracking and spelling of concrete due to volume increase of steel reinforcement. Different methods were investigated to overcome corrosion by numerous researchers.According to A.S.T.M D792 13 standards the density of H.F.R.P bars have been evaluated the experimental value with 0.1mg precision. As per the standards, the H.F.R.P bars are weighed. Then, the H.F.R.P bar is immersed in distilled water at 230C and the wet weight of the bar is noted. The weight of the Sinker in immersed condition is also noted.The laboratory tests carried out to evaluate the physical and mechanical properties of the newly developed H.F.R.P bars and are compared with that of conventional bars. The bond properties of H.F.R.P bars with concrete is also determined. Finally, it explains the experimental investigations on the flexural behavior of concrete one way slabs reinforced with H.F.R.P reinforcements under static loading and are compared with conventional ones. The stress strain performance of the sand coated H.F.R.P bar is linear, lacking yield point up to the failure transverse shear strength is 3 times lesser than the tensile strength of the H.F.R.P bars. Thermal properties of fibers are substantially different in the longitudinal and transverse direction. Therefore the thermal characteristics vary between products according to the fiber, matrix and the fiber volume ratio. In this study the longitudinal Coefficient of linear thermal expansion is 7.5 x 10 6 oC to 9x 10 6 oC. Whereas the transverse Coefficient of linear thermal expansion is between 15 x 10 6 oC to 20 x 10 6 oC. Load deflection graphs drawn exhibits the accordance between experimental and FEM ANSYS observations. The reduced deflection of FEM is due to the rigidness of meshing. The results also confer about the effect of tension stiffening and the bond slip. From the comparison it has been observed that experimental deflections vary from 1.03 to 1.37 times higher than the FEM deflections. 

by Prerna Vaidya | Prof. Nitesh Kushwaha | Prof. Afzal Khan "An Analysis of Mechanical Properties and Flexural Behavior of Concrete Slabs Reinforced wi

th H.F.R.P Reinforcements" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd38691.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/38691/an-analysis-of-mechanical-properties-and-flexural-behavior-of-concrete-slabs-reinforced-with-hfrp-reinforcements/prerna-vaidya

ugcapprovedmanagementjournal, openaccessjournalofmanagement, paperpublicationinmanagement

Implementation of Medical Image Analysis using Image Processing Techniques

 Clinical imaging is playing a fundamental limit in assessment and patching of affliction and discovering tumors and finding of threatening cells in less than ideal stage. As a standard system for perceiving bone features, is minute pictures were used. These photos are secured by using small radiography, where it expected to reiterated, drawn out and work raised measure. This method cant recognize the destructive cells because of the presence of uproar in the photos. Hence there is a necessity for automated and strong strategies to finish the image planning examination. As a first stage, the most fundamental piece of picture planning is to denoising without barging in on the diagnostics information during the clearing of commotion. The past collaboration disposes of the uproar and present fog in the image. To get precise picture getting ready, we have executed fragile and hard breaking point with various coefficients and to check the edge Visu wither was used. It was found that the Wavelet deionsing gadget was a helpful resource for picture improvement. In the gathering, our proposed work was connected with pre planning methodology to wipe out the noise and to get smooth pictures. This collaboration will help with improving the idea of the image and besides take out the fake areas. To recognize the presence of bone illness and to choose its stage, K infers estimation was used and thusly to get smooth picture, edge division measure was performed. 

by Miss. Kode Keerthi | Mr. Parasurama N "Implementation of Medical Image Analysis using Image Processing Techniques" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd39893.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/39893/implementation-of-medical-image-analysis-using-image-processing-techniques/miss-kode-keerthi

internationaljournalofmanagement, callforpapermanagement, managementjournal 

Development of 3D Website Along with VFX and Animation

This paper focuses on the development of 3D web application by designing dynamic 3D model with the help of VFX and animation. 3D Modeling can create the static exposure of product but VFX and animation adds dynamic effects for real time rendering of product. Real time rendering and interactive roaming gives a detailed view of the 3D objects created. Firstly, Blender software was used to design a raw 3D model of a swiss knife and, VFX and animation were applied to add dynamics and interactive features to this model. Verge3D online application was used to define functions that HTML can perform on different parts of the model designed. Lastly, Google web designer was employed to develop an HTML page where we have placed HTML embedded 3D model retrieved from Verge3D. In addition to this, different buttons were placed and linked in the website to allow user to perform different functions defined in Verge3D. 

by Surya Prakash Uniyal | Shivam Amoli | Vipul Kumar Singh | Prashant Chaudhary "Development of 3D Website Along with VFX and Animation" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Special Issue | International Conference on Advances in Engineering, Science and Technology - 2021 , May 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd42459.pdf 

Paper URL : https://www.ijtsrd.com/engineering/computer-engineering/42459/development-of-3d-website-along-with-vfx-and-animation/surya-prakash-uniyal

callforpaperarts, artsjournal, peerreviewedjournal

Agricultural Waste Materials as Potential Adsorbent for Treating Industrial Waste Water

Nowadays, the people suffer a lot due to water pollution and it becomes a serious problem. Therefore, it is very important to minimize the water pollution and utilize the treated waste water for domestic purpose. The principle objective of waste water treatment is to use the water for the domestic purpose without causing any damage to the human health and environment. The waste water from dyeing industries is treated by using agricultural waste such as Saccharum Officinarum leaves, Curcuma Longa leaves, CocosNucifera shell, Rice husk and Saw dust and compares the physical properties of this treated water with the distilled water and drinking water. The agro waste added as 10g, 20g and 30g to the 1000 ml wastewater and leaves it for a period of 1day, 3days, 5days, 7days and 9days and then tested. As a result, addition of 20g of CocosNucifera shell powder in 1000 ml waste water reduces pH and concentrations greatly than other agricultural waste used. Then the color of wastewater can be removed by using coconut shell ash within a period of 2 to 3 days. This study is conducted for the purpose of knowing how efficiently the wastewater could be treated and utilized for domestic purpose using low cost adsorbent such as agricultural waste. 

by S. Shanmathi | Dr. M. Gunasekaran | A. K. Arunagiri Murugan | Dr. S. Christian Johnson "Agricultural Waste Materials as Potential Adsorbent for Treating Industrial Waste Water" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, 

URL: https://www.ijtsrd.com/papers/ijtsrd39995.pdf 

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/39995/agricultural-waste-materials-as-potential-adsorbent-for-treating-industrial-waste-water/s-shanmathi

ugcjournallist, listofugcapprovedjournals, researchpublication