A Review on Effect of Nano Particle Blended with Diesel Fuel in the Compression Ignition Engine

Diesel engine play important role in the field of commercial transportation and agricultural machinery on account of its superior fuel efficiency. Due to shortage of diesel fuel and its increasing cost as well as hazardous emission emitted by diesel engine, the use of biodiesel and its blends has gained importance over the past two decades due to its environmental and economic benefits. Many countries are evaluating a variety of alternative fuels for use in motor vehicles in an attempt to reduce greenhouse emissions, global warming and to improve the energy security of the nations.

Blended fuel is a replacement for the diesel fuel in CI engines due to its significant environmental benefits. The use of blended fuel leads to reduction in particulate matter, hydrocarbon and carbon monoxide emissions that decrease in fuel consumption and the nitrous oxide emission on diesel engine without any modification. The addition of Nano particles with blended diesel fuel increases the efficiency and decreases the emissions.

Metal oxides such as alumina, titanium oxide, cerium oxide in the form of nano particles can be used to increase the efficiency as well as to decrease emission. In this review paper work has been done to demonstrate the effect of various nanoparticles added diesel and biodiesel on performance and emission characteristics of CI engine.

By Abinesh. R | Abihnav. S | Jayamurugan. M | Dr. P. T. Saravana kumar"A Review on Effect of Nano Particle Blended with Diesel Fuel in the Compression Ignition Engine"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

Paper URL: http://www.ijtsrd.com/papers/ijtsrd5869.pdf 

Direct URL: http://www.ijtsrd.com/engineering/mechanical-engineering/5869/a-review-on-effect-of-nano-particle-blended-with-diesel-fuel-in-the-compression-ignition-engine/abinesh-r

Call For Paper, Engineering Journal

Simulation of 16 bit ALU using Verilog-hdl

In many digital circuits ALU is a basic building block. It can be used in integer arithmetic computations and as Complex operation. This research paper is based on the simulation of 16 bit ALU using VHDL. The design was implemented using VHDL Xilinx Synthesis tool ISE and targeted for Spartan device. An ALU performs following operations '“ Addition, subtraction, multiplication, Not, logical shift right, logical shift left, rotate right, rotate left, OR, AND, XOR, NAND, NOR, XNOR and comparison between two signals.

By Mayank Mittal"Simulation of 16 bit ALU using Verilog-hdl"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

Paper URL: http://www.ijtsrd.com/papers/ijtsrd5876.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/5876/simulation-of-16-bit-alu-using-verilog-hdl/mayank-mittal

UGC Approved Journal, Engineering Journal

Video Retrieval Systems Methods, Techniques, Trends and Challenges

Video Retrieval (VR) has been increasingly accustomed describe the method of retrieving desired videos from an oversized assortment on the premise of options that are extracted from the videos. The extracted options are accustomed index, classify and retrieve desired and relevant videos whereas filtering out unwanted ones. Videos are often pictured by their audio, texts, faces and objects in their frames. An individual video possesses distinctive motion options, color histograms, motion histograms, text options, audio options, features extracted from faces and objects existing in its frames.

Videos containing helpful info and occupying significant house within the databases are under-utilized unless VR systems capable of retrieving desired videos by sharply choosing relevant whereas filtering out unwanted videos exist. Results have shown performance improvement (higher precision and recall values) once options appropriate to particular kinds of videos are used with wisdom. Various combinations of those options also can be accustomed reach desired performance.

During this paper a fancy and wide space of VR and VR systems has been bestowed in a very comprehensive and easy approach. Processes at completely different stages in VR systems are represented in a very systematic approach. Types of options, their mixtures and their utilization ways, techniques and algorithms are shown. Numerous querying methods, a number of the options get similarity like Kullback-Leibler distance method and relevancy Feedback technique are mentione dlike

By Rahul S Patel | Gajanan P Khapre | R. M. Mulajkr"Video Retrieval Systems Methods, Techniques, Trends and Challenges"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

Paper URL: http://www.ijtsrd.com/papers/ijtsrd5862.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/5862/video-retrieval-systems--methods-techniques-trends-and-challenges/rahul-s-patel

Open Access Journal, Engineering Journal

A Novel Technique of Power Extraction from a Conventional Fluorescent Lamp

Fluorescent lamps are commonly used in our homes as a source of light. The conventional lamps use a choke and a starter arrangement for starting discharge in the tube. Under normal working conditions an appreciable potential drop occurs across the choke. The circuit being inductive the power factor is also low. Now is there any way of utilizing this voltage drop? Experiments were carried out with a view to using this potential drop to provide energy at low wattage without hampering the normal operation of the tube light.

Interesting results were obtained. The power factor was also found to improve. In this paper a method of utilizing the voltage drop across the choke of a fluorescent lamp as a source of energy has been elaborated.

Parantap Nandi"A Novel Technique of Power Extraction from a Conventional Fluorescent Lamp"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

Paper URL: http://www.ijtsrd.com/papers/ijtsrd5776.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/5776/a-novel-technique-of-power-extraction-from-a-conventional-fluorescent-lamp/parantap-nandi

Open Access Journal, Engineering Journal

Charaterization of Coatings on Tool: A review

Improvement in performance of cutting tool for high-speed machining of hard and difficult-to-cut material has remained a problem for quality and economy of production. Hard coatings are well known to improve the performance of cutting tools in machining applications. Physical and chemical vapour deposition techniques have found increasingly wider use in such applications in recent years. To improve the lifetime of a tool for which it functions properly, the cutting tool has to be protected, often by coatings that are specifically designed to prevent certain damage modes that occur in particular applications. In fact, over 90% of all cemented carbide inserts are currently coated using chemical vapor deposition, CVD, physical vapor deposition, PVD, or their combination. This paper will present coatings that are specially designed to protect the cutting tool and extend its functionality (lifetime).

By Harinder Singh | Rutash Mittal"Charaterization of Coatings on Tool: A review"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

Paper URL: http://www.ijtsrd.com/papers/ijtsrd5842.pdf 

Direct URL: http://www.ijtsrd.com/engineering/mechanical-engineering/5842/charaterization-of-coatings-on-tool-a-review/harinder-singh

Paper Publication, Engineering Journal

Water Quality Measuring and Monitoring: A Survey

Water is important resource in our life. It plays vital role in our human life, animals and eco system.But, Now-a-days water had polluted due to human activities. For that purpose, it is important to measure and monitor the quality of water. This survey describes, what the techniques available to measure are and monitor quality of water.

By T. Umamaheswari | Dr. M. Newlin Rajkumar | R. Tharani | S.Rajalakshmi"Water Quality Measuring and Monitoring: A Survey"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

Paper URL: http://www.ijtsrd.com/papers/ijtsrd5833.pdf 

Direct URL: http://www.ijtsrd.com/engineering/computer-engineering/5833/water-quality-measuring-and-monitoring-a-survey/t-umamaheswari

International Journal, Engineering Journal

Scheduling Algorithms in Cloud Computing - An Extensive Survey

In any computing environment, the availability of resources is finite, so effective utilization of resources is very important. To achieve effective management of the available resources in a scalable environment optimal mechanism is required. In order to do this, choosing of scheduling algorithm is important. The scheduling techniques should beselected in such a way that the various user demands are satisfied. In this paper, an overview of different scheduling techniques like cost and energy aware scheduling, cloud based workflow scheduling, an improved ant colony algorithm in cloud computing environment are analysed.

By S. Saranya Devi | V. Venkatesa Kumar | M. Newlin Rajkumar"Scheduling Algorithms in Cloud Computing - An Extensive Survey"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-1 , December 2017,

Paper URL: http://www.ijtsrd.com/papers/ijtsrd5840.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/5840/scheduling-algorithms-in-cloud-computing---an-extensive-survey/s-saranya-devi

Indexed Journal, Engineering Journal