Engineering Journal

Sunday, June 13, 2021

Adulteration of Natural Fibers

This experimental study mainly focuses on increasing Mechanical properties of the composite by Adulteration of natural fibres Coir and Hemp. Different combinations of the fibres within the optimum level are tested, evaluated and compared such that to obtain best combination that enhances the mechanical properties like flexural, tensile and impact properties. For Fabrication of composite, Hand layup method is used. The tests on the specimen are carried according to the ASTM Standards. SEM Scanning Electron Microscope is used to carry out the INTERFACIAL ANALYSIS such that to study micro structural behaviour and to find out the causes of failure NOMENCLATURE The detailed view about the ADULTERATION OF NATURAL FIBERS and it’s working principles.

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-4 , June 2021,

URL: https://www.ijtsrd.compapers/ijtsrd42542.pdf

Paper URL: https://www.ijtsrd.comengineering/mechanical-engineering/42542/adulteration-of-natural-fibers/b-dhananjaneya

internationaljournalofscience, openaccessjournalofscience, ugcapprovedjournalsforscience

Design and Fabrication of Automated Solar Insect Trap

Insect control is the biggest challenge in agriculture. It is a common practice to use a deadly chemical pesticide to protect the crop from pest damage. There are many side effects of using a chemical. Use of more pesticide results in financial burden to the farmers. Moreover, the food becomes contaminated. In organic and integrated farming by using environment friendly automated solar powered insect trap, pest can be brought under control effectively. Solar trap is very simple in construction and use. On the four legged stand about five foot height , the solar lamp strips are mounted powered by battery. A basin is placed below the lamp to collect the insects. The basin can be tilted with the help of motor driven by battery. To refill the basin with the water the solar trap is fitted with a pump. During the evening when the harmful pests hovers the crop fields, the solar lamp will switch on automatically and attracts the insects that may destroy the crops. Attracted insects end up in a water filled basin. Water can be mixed with soap oil or shampoo to prevent the insects escaping from the basin. Every day, basin full of insects can be trapped. Farmers job is to switch on the motor that tilt the basin to empty the trapped insects and refill the water to basin with the help of pump every day. One Solar Trap is enough for one acre farming field. Another specialty of the machine is that it can be shipped anywhere without much difficulty. The Solar Trap can be used in various crops fields such as vegetables, pomegranates, grapes, cucumber, nut, coconut, paddy, sugarcane etc.

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-4 , June 2021,

URL: https://www.ijtsrd.compapers/ijtsrd42545.pdf

Paper URL: https://www.ijtsrd.comengineering/mechanical-engineering/42545/design-and-fabrication-of-automated-solar-insect-trap/k-sathya-sai

ugcapprovedmanagementjournal, openaccessjournalofmanagement, paperpublicationinmanagement

Adversarial Multi Scale Features Learning for Person Re Identification

Person re identification Re ID is the task of matching a target person across different cameras, which has drawn extensive attention in computer vision and has become an essential component in the video surveillance system. Pried can be considered as a problem of image retrieval. Existing person re identification methods depend mostly on single scale appearance information. In this work, to address issues, we demonstrate the benefits of a deep model with Multi scale Feature Representation Learning MFRL using Convolutional Neural Networks CNN and Random Batch Feature Mask RBFM is proposed for pre id in this study. The RBFM is enlightened by the drop block and Batch Drop Block BDB dropout based approaches. However, great challenges are being faced in the pre id task. First, in different scenarios, appearance of the same pedestrian changes dramatically by reason of the body misalignment frequently, various background clutters, large variations of camera views and occlusion. Second, in a public space, different pedestrians wear the same or similar clothes. Therefore, the distinctions between different pedestrian images are subtle. These make the topic of pre id a huge challenge. The proposed methods are only performed in the training phase and discarded in the testing phase, thus, enhancing the effectiveness of the model. Our model achieves the state of the art on the popular benchmark datasets including Market 1501, duke mtmc re id and CUHK03. Besides, we conduct a set of ablation experiments to verify the effectiveness of the proposed methods.

by Mrs. D. Radhika | D. Harini | N. Kirujha | Dr. M. Duraipandiyan | M. Kavya "Adversarial Multi-Scale Features Learning for Person Re-Identification"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-4 , June 2021,

URL: https://www.ijtsrd.compapers/ijtsrd42562.pdf

Paper URL: https://www.ijtsrd.comengineering/computer-engineering/42562/adversarial-multiscale-features-learning-for-person-reidentification/mrs-d-radhika

peerreviewedjournals, reviewpapers

Experimental Assessment of the Effect of Paper Waste on Improvement of Concrete Behavior

India is facing a significant challenge in disposing the waste in landfills throughout the country. The landfill disposal is leading to high disposal costs and potential environmental problems. If the current trend continues, waste production will grow by 5 each year, which will ultimately result in a saturated capacity of landfills by 2020. The use of paper industry waste in concrete formulations was investigated as an alternate to landfill disposal. The cement has been replaced by paper sludge accordingly within the range of fifty to fifteen by weight for the M 20 mix. By using an adequate amount of paper and water, concrete mixtures were produced and compared in terms of slump and strength with the traditional concrete. The concrete specimens were tested for compressive strength. These tests were administered to judge the mechanical properties for up to twenty eight days. As a result, the compressive increased up to 5 addition of paper waste and further increased in waste paper reduces the strengths gradually. The research on the use of paper waste can be further carried out in concrete manufacturing as a new recycled material.

by V. S. Sherekar | S. K. Patil | G. S. Patil "Experimental Assessment of the Effect of Paper Waste on Improvement of Concrete Behavior"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-4 , June 2021,

URL: https://www.ijtsrd.compapers/ijtsrd42532.pdf

Paper URL: https://www.ijtsrd.comengineering/civil-engineering/42532/experimental-assessment-of-the-effect-of-paper-waste-on-improvement-of-concrete-behavior/v-s-sherekar

ugclistedjournals, paperpublication

A Review Paper on AWS Product and Services

AWS is a cloud service provider that manages and maintains the technology infrastructure in a secure environment so the customer can access the cloud resources. The AWS service is provided by the Amazon that uses distributed IT infrastructure to provide different IT resources available on demand. It provides different services such as infrastructure as a service IaaS , platform as a service PaaS and packaged software as a service SaaS . It is a cloud computing platform which is globally available. A large enterprise spread across the globe can utilize the AWS to deliver the training to the distributed workforce. APN is a global partner program that helps partners use the AWS to build their businesses.

by Riddhi Sanjay Shinde | Prof Pratibha Adkar "A Review Paper on AWS Product and Services"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-4 , June 2021,

URL: https://www.ijtsrd.compapers/ijtsrd42528.pdf

Paper URL: https://www.ijtsrd.comengineering/computer-engineering/42528/a-review-paper-on-aws-product-and-services/riddhi-sanjay-shinde

callforpapercommerce, ugcapprovedjournalsincommerce, commercejournal

Study on Recycled Aggregate Concrete

In the last decade, the volume of construction waste has risen significantly and social and environmental issues around waste recycling have also been increased. Many analysts contend that recycled concrete aggregates RCAs are mainly useful for non structural concrete purposes. However, this study reveals that the recycled aggregates obtained from concrete collections have good quality concrete. Baton waste from the collapsing structure has been treated and a vast variety of various concentrations are used for the preparation of fresh concrete. Recycled and renewable buildings Waste has long been known to recover manufacturing renewable energy and energy. Among some, gross output is missing. The usage of recycled aggregates decreases the quality of recycled aggregate concrete, which limits its use. Various surface treatment methods were tested to improve the quality of the recycled gross aggregate, such as the purification of the recycled aggregates by water and diluted acid. The pressure characteristics of the refined and untreated field aggregate is contrasted. The results revealed that the tensile strength of the recycled aggregate was compressive, bent and crack less than the natural aggregate.

by Rajat Saini | Ajay Singh | Swati Dhiman "Study on Recycled Aggregate Concrete"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-4 , June 2021,

URL: https://www.ijtsrd.compapers/ijtsrd42499.pdf

Paper URL: https://www.ijtsrd.comengineering/civil-engineering/42499/study-on-recycled-aggregate-concrete/rajat-saini

callforpaperphysics, physicsjournal

Methods of Plant Propagation Sexual and Vegetative

The fruit plants are propagated by two main methods, namely, sexual method and asexual method. Most of the fruit plants do not produce seedlings true to type. Using the asexual method of propagation the fruit plants produce true to type clones of the parent plant. Moreover, these plants also produce uniform yield, fruit size and quality. Although seedling plants produce heavy crop, the fruit size and quality is inferior and do not fetch good return in market. The seedling plants for several fruit crops have long juvenile period and have more vigorous growth habit, which creates difficulty in taking plant protection measures and harvesting of fruits. The fruits of seedling plants do not mature in one stroke and hence, affect the marketing. The asexual methods of plant propagation are of the four types, Cutting, Layering, Budding and Grafting. In this communication we present review on the Sexual method of propagation Seed along with all the asexual or vegetative methods like, Cutting, Layering, Budding and Grafting methods of plant propagation. The cutting method includes root, stem, scion and leaf cutting methods of vegetative propagation. The layering method category encompasses the Natural, Simple, Tip, Compound or Serpentine, Trench, Mound and Air layering methods. The budding method of the asexual propagation includes, T Shield, Inverted T Shield, Chip, I, Patch, Forkert, Flute and Ring Annular Budding methods.