Fabrication and Study of the Mechanical Properties of AA7129 Alloy Reinforced with B4C andTiC

In the present work Al7129 metal matrix reinforced with Titanium carbide TiC and Boron carbide B4C powder is fabricated through stir casting route. Metal matrix composites were manufactured by altering percent weight fraction 5 to 25 wt. in steps of 5 weight with average particle size. The importance of composites as engineering materials is considered by the fact that out of over 1600 engineering materials available in the market today consists of 200 composites. These composites initially to many experiments and the wear behavior of these composites were traversed to a maximum extent and were reported by number of research scholars for the past 25 years. In the present study based on the literature review, the effect Carbide on Stir Cast Aluminum Metal Matrix Composites is discussed. aluminum hybrid composites are a new generation of metal matrix composites that have the potentials of satisfying the demands of advanced engineering applications such as in used in the aircraft manufacturing sector, aerospace, automobile, space, underwater and transportation applications. This is mainly due to upgraded mechanical and tribological properties like stiff, strong, abrasion and impact resistant and is not easily corroded. This paper attempts to review the different combination and configuration of reinforcing materials used in processing of hybrid aluminum matrix composites and how it effects the mechanical, corrosion and wear performance of the materials. 

by M. Rajesh | Dr. G. Naga Malleswara Rao | Dr. B. Chandra Mohana Reddy "Fabrication and Study of the Mechanical Properties of AA7129 Alloy Reinforced with B4C &TiC"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd31626.pdf

Paper Url :https://www.ijtsrd.com/engineering/mechanical-engineering/31626/fabrication-and-study-of-the-mechanical-properties-of-aa7129-alloy-reinforced-with-b4c-andtic/m-rajesh

ugcapprovedmanagementjournal, openaccessjournalofmanagement, paperpublicationinmanagement

Design and Analysis of Universal Reaper Machine

In today's scenario, many research's are been done in the agriculture field and there is also a wide scope for more advancement in the technology. So therefore our objective is to design and fabricate agricultural reaper machine which would be used for cutting various crops like wheat, rice, etc. The reaper machine is being designed to compensate the increasing demand of workers for harvesting of crops. The machine would cover a large area and will require a person for handling. The CAD model is being prepared in SOLIDWORKS 2018 considering AA 6063 tubes. In this machine 4 wheels are been used. And considering various loads and forces the analysis of the machine has been done. The FEA has been done on SOLIDWORKS

2018 Software.

by Sachin Kumar Sharma | Gautam Kumar | Saurabh Awasthi | Prashant | Vivek Tyagi | Vineet Pal | Saurabh "Design and Analysis of Universal Reaper Machine"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd31590.pdf

Paper Url :https://www.ijtsrd.com/engineering/mechanical-engineering/31590/design-and-analysis-of-universal-reaper-machine/sachin-kumar-sharma

internationaljournalsofcomputerscience, callforpapercomputerscience, ugcapprovedjournalsforcomputerscience 

Home Power Saving using Heartbeat

This System consists of the heartbeat sensor which detects a person heartbeat and according to the heartbeat turn on or off the appliances. I have designed this project with respect to a student and feeded the system with the heartbeat of a normal student. I also know that with age, heartbeat of a person decreases and in different condition and different way of sleeping the heartbeat differs. But in my project, I have only assumed a student or a normal person of age limit from 20 to 30 years. By comparing the standard heartbeat with the present heartbeat, the appliances are controlled according to the heartbeat of a person the AC appliances bulb light start or stop working as follows if heartbeat count is greater than 70 lights remain on. if heartbeat count is less than 70 lights turn off. But, in the real implementation, logic used is according to the fact that whenever a healthy person falls asleep, his heartbeat decreases by 15 beatsper minute. So, programming the Microcontroller with a threshold of around 60 beats per minute will turn off the appliances except fan or AC may be whenever the heartbeat sensor senses the threshold falling to 60. 

by Himanshu Sharma "Home Power Saving using Heartbeat"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd31592.pdf

Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/31592/home-power-saving-using-heartbeat/himanshu-sharma

ugcjournallist, listofugcapprovedjournals, researchpublication

Real Time Facial Expression Recognition and Imitation

he object of this paper was Real Time Facial Expression Recognition FER has become main area of interest due to its wide applications. Automatic Facial expression recognition has drawn the attention of researchers as it has many applications. Facial Expression Recognition gives important information about emotions of a human being. Many feature selection methods have been developed for identification of expressions from still images and real time videos. This work gives a detailed review of research works done in the field of facial expression identification and various methodologies implemented for facial expression recognition. 

by Varsha Kushwah | Madhuri Diwakar | Tej Kumar | Dushyant Singh "Real Time Facial Expression Recognition and Imitation"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd31584.pdf

Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/31584/real-time-facial-expression-recognition-and-imitation/varsha-kushwah

callforpaperpapersconference, highimpactfactor, manuscriptpublication

Agrithozhan - Development of Android Application for Smart Farming

The main objective of this project is to develop a Farm Field Monitoring System which will measure soil pH and suggest suitable as well as Demand crop to get better yield. This system will also predict the weather and intimate soil moisture levels to help the farmers to cultivate the proper crop and monitor their own Land. This project will give the whole data about the farm cultivation. With help of this project farmers gets much relief in farm cultivation and the growth of crops will be monitored continuously. With the sensed pH value best Suitable Crops for the corresponding farm field are predicted using predefined dataset and Demand crop will be sorted from those crops and with the sensed temperature and humidity values Weather in the farm field is also Intimated in three levels as "Normal Weather", "Chances of Rain" and "Too hot". Soil Moisture Level is also measured with moisture sensor and converted into three levels as Low, Medium and High. The validated data are sent to the cloud using IOT Internet of Things module and Intimated to the farmer using customized Android Application, including the time at when it was performed. If the soil Moisture level is indicated as Low or High, using Customized android application the Pumping Motor connected to the system can be turned ON or OFF from anywhere in the world using Internet. 

by Dr. S. Suvitha | V. Divakar | S. Naveen | T. K. Gokul Raj "Agrithozhan - Development of Android Application for Smart Farming"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd31610.pdf

Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/31610/agrithozhan-%E2%80%93-development-of-android-application-for-smart-farming/dr-s-suvitha

callforpaperpapersinjournals, specialissuepublication, multidisciplinaryjournal

Design and Simulation of Smart Antenna for D2D Communication

Device to Device D2D communication allows user devices to directly communicate with each other. D2D using smart antenna will reduce the interference and also reduce the power with respect to distance between the devices. This D2D communication generates directional signal transmission between D2D pairs and reduces the interference between other users. This study also proposes the study of 4x4 MIMO microstrip patch antenna for 5G cellular network. This antenna operates at the frequency of 3.3 4.2 GHZ and its resonant frequency is 3.75GHZ. Rogers RO4350B lossy with thickness of 0.101mm and dielectric constant has been used as the antenna substrate. The simulations results shows that the proposed antenna design and it explains about the beam forming concepts that provides the need of D2D communication for 5G application. The antenna is steered to particular direction with the help of beam forming algorithm. This shows that such scheme improves the system capacity compared to the traditional one by focusing it in a desired direction. This method will provide security to the data, increases the network efficiency, consume less power and traffic made by the signals is reduced. 

by Dr. Arunachalaperumal | B. S. Aparna | R. Renugadevi "Design and Simulation of Smart Antenna for D2D Communication"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd31609.pdf 

Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/31609/design-and-simulation-of-smart-antenna-for-d2d-communication/dr-arunachalaperumal

callforpaperlanguages, languagesjournal, bestjournal

Alleviation of Piping of Soil using Human Hair Fibres

Piping is a subsurface type of disintegration which includes the expulsion of subsurface soils in pipe like channels to a break exit. It principally happens in generally loose soils with high porousness. Henceforth, successful countermeasures are required and soil reinforcements as support strategy is valuable in this application. Past examinations have reasoned that piping resistance of soil increments, when blending short fibres to successfully confine soil particle movement. In this venture an exertion is made to utilize bountifully accessible, characteristic waste Human Hair Fibers HHF as soil fortifications and the impact of the same when discretely and randomly distributed on the piping conduct of soil are inspected. The experimental tests for piping using human hair fibres were carried out for different fiber contents 0.

5, 1.0, and 1.5 and fiber lengths 2,3,4,and 5 cm . The critical hydraulic gradient and piping resistance for each soil sample were calculated and compared to find the most effective combination of fibre length and content.

by Noureen Mohamed Rafy | Jyothi Lekshmi R "Alleviation of Piping of Soil using Human Hair Fibres"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd31488.pdf

Paper Url :https://www.ijtsrd.com/engineering/civil-engineering/31488/alleviation-of-piping-of-soil-using-human-hair-fibres/noureen-mohamed-rafy

callforpapercommerce, ugcapprovedjournalsincommerce, commercejournal