Wireless Power Transmission to Multiple Devices

This project work deals with wireless energy subject. Wireless power transfer or wireless energy transmission is the transmission of electrical power from a power source to a consuming device without using discrete manmade conductors. It is a generic term that refers to a number of different power transmission technologies that use time varying electro magnetic field. Wireless transmission is useful to power electrical devices in cases where interconnecting wires are inconvenient, hazardous, or are not possible. In wireless power transfer, a transmitter device connected to a power source, such as the mains power line, transmits power by electromagnetic fields across the space to one or more receiver devices, where it is converted back to electric power and utilized. In general, the efficiency of wireless power system will be very poor because of generating huge electro magnetic field. To generate such a huge field, lot of current must be pumped in to the energy transmitting coil, where as power receiving coil may not receive all the energy that is induced in the power transmitting coil. Depending up on the distance between the two coils, some of its energy will be received by the secondary coil. If the secondary coil is kept very close to the primary coil, more than 70 energy can be captured by the secondary coil. As the distance is increased, accordingly power losses also will be increased. So here the wireless power transmission concept is designed to operate multiple devices individually. The devices connected here for demonstration purpose are mobile charging, LED light and a DC motor. As the concept is designed a proto type module, the wireless power is not sufficient to operate all the devices at a time. So the loads are demonstrated to operate one at a time individually. If there's one bit of transformational technology in the mobile world today, it is wireless charging. Just as the world got a hang of using micro USB to charge everything and anything excluding Apple, the next best thing came along which is the wireless charging. Wireless energy works on the principle of electromagnetic induction. Coils of wire in the transmitter coil create a magnetic field as the current passes through. This field can induce an electrical current in an adjacent coil of wire without actually touching it. If this wire is part of a battery charging circuit, then you have wireless charging or it can be connected to any device to operate it directly. 

by P. Sai Kumar Reddy | P. Vikas | G. Prabhuteja | B. Pulla Rao "Wireless Power Transmission to Multiple Devices"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd31363.pdf

Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/31363/wireless-power-transmission-to-multiple-devices/p-sai-kumar-reddy

callforpaperinternationaljournal, ugclistofjournals, bestinternationaljournal 

Arduino Based Smart Light Management System for Smart Cities

Automatic gismo system mistreatment Arduino and PIR Passive Infrared device will be wont to activate and OFF the lighting system of home mechanically by detective work the presence of human. this technique will be employed in garages, classrooms, staircases, bathrooms, etc. wherever theres no would like of continuous lightweight however only if theres somebodys. Also, theres no got to worry concerning electricity bills because the lights get OFF once theres no human and thus one got to pay the bills as per use. This paper projected as concerning automatic gismo system that mechanically management the area lights mistreatment Arduino and PIR device. the most elements employed in this technique square measure Arduino Uno, PIR device and Relay Module. Out of those elements, the operation of system chiefly depends on PIR device that helps in detective work human presence. Experimental results show that a minimum of five hundredth of power will be saved by mistreatment the projected system.

by Gopinath. V | Arunkumar .V | Bhavan. S | Aswin. M. D | Kishorekumar. A "Arduino Based Smart Light Management System for Smart
Cities"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd31350.pdf

Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/31350/arduino-based-smart-light-management-system-for-smart-cities/gopinath-v

internationaljournalofmanagement, callforpapermanagement, managementjournal 

Experimental Investigation of Magnesium Phosphate Cement Based Concrete

This project shows the results of an experimental study on the Magnesium phosphate cement for repair work in concrete mixed with coarse aggregate and fine aggregate. The percentage of Magnesium phosphate cement used in concrete and cement was replaced with 0 , 5 and 10 . The effects of curing for 7, 14 and 28 days on strength of concrete were studied. Experimental results indicate that the increase in the proportions of Mineral Admixtures resulted in an increase or decrease in the strength of concrete. The overall test performance revealed that Magnesium phosphate cement can be utilized as a partial replacement of cement in high strength concrete. The Mix Design for concrete M60 grade is being done as per the Indian Standard Code IS 10262 2009. 

by S. Priyadarshika | M. Rajkannan "Experimental Investigation of Magnesium Phosphate Cement Based Concrete" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020, 

URL: https://www.ijtsrd.com/papers/ijtsrd31361.pdf 

Paper Url :https://www.ijtsrd.com/engineering/civil-engineering/31361/experimental-investigation-of-magnesium-phosphate-cement-based-concrete/s-priyadarshika

openaccessjournalofengineering, engineeringjournal, paperpublicationforengineering

A Review Paper on Design of Generator in Vapour Absorption Refrigeration System

In vapour absorbtion refrigeration system an absorber, a pump, a generator and a pressure reducing valve replace the compressor. We can also operate the generator with low thermal energy by exhaust heat of IC engine. The fossil fuel remain main source of energy but contribute a tremendous amount of pollutants in the environment leading to global warming ,so for the purpose of refrigerator and air conditioning a vapour absorption refrigeration system could be used. this system utilizes the wasteful heat from heavy vehicle exhaust and work on VARS which provides the cooling and reducing various costs like fuel and maintenance. The research has been done in order to recover maximum waste heat and then analyzing the system performance. Through this system the researchers has tried to find out the maximum COP. It has been found by research that generator temperature has the most effect on the release of the system.

by Alok Kumar Gupta | Laraib Ahamad | Prabhat Kumar Yadav | Paurush Pandit "A Review Paper on Design of Generator in Vapour Absorption Refrigeration System"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd31321.pdf

Paper Url :https://www.ijtsrd.com/engineering/mechanical-engineering/31321/a-review-paper-on-design-of-generator-in-vapour-absorption-refrigeration-system/alok-kumar-gupta

callforpaperchemistry, chemistryjournal, openaccessjournalofchemistry 

Effect of Compaction Moisture Content on Strength Parameters of Unsaturated Clay using Triaxial Test

Soil compaction is a process of mechanical densification of soil by pressing the soil particles close to each other and removing the air between them. It is of utmost importance in the broad science of Geotechnical engineering playing a significant role in all types of Geotechnical investigations. The principle soil properties affected by compaction include the shearing resistance. The constitutive equations for volume change, shear strength and flow for unsaturated soil have been generally accepted in Geotechnical engineering Fredlund and Rahardjo, 1993a . The shear strength of an unsaturated clayey soil and soil water characteristic curve depend on the soil structure or the aggregation which in turn depends on the initial water content and the method of compaction. The aim of this research work is to determine the cohesion, angle of internal friction of the clay soil based on the moisture content. For this clay soils classified as CH, CI are used. Soil samples are chosen on the basis of soil type and clay content more than 25 . Maximum dry density and Optimum moisture content is are determined after 24 hour soaking, using light compaction. The hydrometer test are carried out for the grain size distribution. For the present work six different type of clayey soils are consider. The sample are taken from Dahej 02 , Surat 02 and Bhavnagar 01 . All the sample were tested at OMC and MDD as obtain from standard proctor test. The compaction was done at 0.95,1.00 and 1.05 times of OMC. Each sample were tested for triaxial test as well as direct shear at the strain rate of 0.625 mm min and 1.25 mm min. direct shear test and triaxial test are conducted for unconsolidated undrained UU condition. 

by Vedwala Khushbu M | Priyank H. Patel | Vishal N. Patel "Effect of Compaction Moisture Content on Strength Parameters of Unsaturated Clay using Triaxial Test"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd31250.pdf

Paper Url :https://www.ijtsrd.com/engineering/civil-engineering/31250/effect-of-compaction-moisture-content-on-strength-parameters-of-unsaturated-clay-using-triaxial-test/vedwala-khushbu-m

ugcapprovedjournalswithlowpublicationfees, conferenceissuepublication

Design and Fabrication of IoT Enabled Wheelchair cum Stretcher with Home Automation and Patient Monitoring System

The proposed project was aimed at designing and fabricating a wheelchair cum stretcher that can overcome the shortcomings of a conventional wheelchair, with focus on cost effectiveness and utility. This project will eliminate the use of a separate wheelchair and stretcher in hospitals. The proposed idea describes the wheelchair, which can transform itself into a semi chair and stretcher and the mobility of the wheelchair positions are made with the help of knob without any assistance. In addition to it, the proposed project has the IoT enabled home automation to control the household devices and patient monitoring system for regularly monitoring the health of patients at home. 

by Dr. G. Kavya | Janani R | Keerthana T R S | Reena Joseline A "Design and Fabrication of IoT Enabled Wheelchair cum Stretcher with Home Automation and Patient Monitoring System"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd31324.pdf

Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/31324/design-and-fabrication-of-iot-enabled-wheelchair-cum-stretcher-with-home-automation-and-patient-monitoring-system/dr-g-kavya

ugcapprovedjournalswithlowpublicationfees, conferenceissuepublication

Partial Replacement of Natural Sand by Microfines for Cement Concrete

The purpose of this study was to investigate the PARTIAL REPLACEMENT OF NATURAL SAND BY MICROFINES FOR CEMENT CONCRETE. The suitability of crushed stone dust waste as a fine aggregate for concrete has been assessed by comparing its basic properties with that of conventional concrete. Two basic mixes were chosen for natural sand to achieve M25 and M30 grade concrete. The equivalent mixes were obtained by replacing natural sand by stone dust partially and fully. The test results indicate the crushed stone dust waste can be used effectively to replace natural sand in concrete. In the experimental study of strength characteristics of concrete using crushed stone dust as fine aggregate it is found that there is increase in compressive strength, flexural strength and tensile strength of concrete. 

by Bharath V B | Kuldeep Singh Solanki | Muhammad Nasir Ibrahim "Partial Replacement of Natural Sand by Microfines for Cement Concrete"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd31240.pdf

Paper Url :https://www.ijtsrd.com/engineering/civil-engineering/31240/partial-replacement-of-natural-sand-by-microfines-for-cement-concrete/bharath-v-b

callforpapersocialscience, ugcapprovedjournalsforsocialscience, socialsciencejournal