Key Aspect for Approach of Smart Grid Design System

With development of smart grid technology, power generation and distribution network acts as new brain in this field. In this technology, the network will not only get going to integrated and set communicable all over the country but its demand will be tracked by the control centers in different aspect and at high time the usage of power is going to cost higher than the actual rate with intimation given to the customer through notification via sms or email. Through this research, the designing for Smart Grids was inspected from a logical aspect, monitoring its behavioral, and physical, and must observe the optimal integration of entire system. From the conventional distribution system, we can see the designed for the control of all the constituents as observe to be autonomous with each other. Thus, centralization in control and consolidated functionality are the main challenges discover by the distribution system. To minimize these matter of concern, the term ""distribution system and its responsibilities"" came into effect by using information and communications technology ICT to power the resolution in circulating distribution system. For preparing the outline in this aspect, this paper aims to present a layout in initiating smart grid technology and responsibilities. In contrast we argue to design an interest in the field of Smart Grid. 

by Ashish Gangwar | Sadaf Qasim ""Key Aspect for Approach of Smart Grid Design System""

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd29840.pdf

Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/29840/key-aspect-for-approach-of-smart-grid-design-system/ashish-gangwar

callforpapermedicalscience, medicalsciencejournal, manuscriptsubmission

Control of Stand Alone PV System using Single Voltage Sensor Based MPPT

This paper proposes to model a voltage sensor based MPPT with voltage reference control technique with a PI controller for the SEPIC converter. The PI controller will minimize the error between the reference voltage VRef generated by the MPPT controller and the panel voltage VPV . Thus, it is an adaptive solution, as if VPV is far from MPP, error will be large and so it will automatically produce large step size D and vice versa. Thus, the MPPT with voltage reference control technique with the association of PI controller can effectively improve the performance of the PV system. The simulations were performed in the environment of MATLAB SIMULINK.

by Giri Babu | A. Raja Babu ""Control of Stand Alone PV System using Single Voltage Sensor Based MPPT""

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd29810.pdf

Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/29810/control-of-stand-alone-pv-system-using-single-voltage-sensor-based-mppt/giri-babu

callforpaperarts, artsjournal, peerreviewedjournal

A Review Tribological analysis of Cast Iron by Advanced Coating

In our engineering system, friction, wear and tribology are not phenomena that most peoples are considering on daily basis. Wear tribological process occurs when two surfaces are in contact and both one are moving relative to each other. The cast iron is widely used in industrial sector. It have high rate of friction. To reduce the friction the various types of coating is analyzed as well as with lubrication the rate of wear decreases. 

by Prof. Matin A. Shaikh | Prof. Ajij A. Shaikh | Prof. Mrs. G. V. Patil ""A Review: Tribological analysis of Cast Iron by Advanced Coating""

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd29871.pdf

Paper Url : https://www.ijtsrd.com/engineering/mechanical-engineering/29871/a-review-tribological-analysis-of-cast-iron-by-advanced-coating/prof-matin-a-shaikh

callforpapercommerce, ugcapprovedjournalsincommerce, commercejournal

In this paper, two types of one dimensional discrete time systems are firstly proposed and the chaos behaviors are numerically discussed. Based on the time domain approach, an invariant set and equilibrium points of such discrete time systems are presented. Besides, the stability of equilibrium points will be analyzed in detail. Finally, Lyapunov exponent plots as well as state response and Fourier amplitudes of the proposed discrete time systems are given to verify and demonstrate the chaos behaviors.

by Yeong-Jeu Sun ""Two Types of Novel Discrete-Time Chaotic Systems""

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020,

URL: https://www.ijtsrd.com/papers/ijtsrd29853.pdf

Paper Url : https://www.ijtsrd.com/engineering/electrical-engineering/29853/two-types-of-novel-discrete-time-chaotic-systems/yeong-jeu-sun

callforpaperchemistry, chemistryjournal, openaccessjournalofchemistry

A Novel Geometry of Multiband Planar Antenna for Wireless Applications

The compact multiband antenna is of practical interest for the fast growing modern communication industry. In this regard radiation performance of modified rectangular multiband antenna, designed on FR 4 substrate is proposed in this paper. The geometry is operating at three different frequencies in the considered range of 4 6 GHz and offers exc ellent matching with the feedline for each resonant frequency. 

by Parul Pathak | P. K. Singhal "A Novel Geometry of Multiband Planar Antenna for Wireless Applications"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29797.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/29797/a-novel-geometry-of-multiband-planar-antenna-for-wireless-applications/parul-pathak

call for paper engineering, special issue publication, open access journal of engineering

Influence of Elastic Deformations on the Adhesion of the ZRN Coating on the Clinching Tool

Clinching is a mechanical joining method. Is it utilized in automobile industry as an alternative method to resistance spot welding. Considering that various types of materials are joined in car body production, PVD coatings are used to increase the lifetime of the clinching tools. Hot dip galvanized steel sheets were used for joining by clinching method. The zirconium nitride ZrN PVD coating was deposited on the surfaces of clinching tool. The loss of cohesion properties of coating was observed at punch´s R0.2 radius after 300 clinched joints. FEM analysis was used to show the punch´s critical part when the tool is under load. 

by LuboÅ¡ KaÅ¡c¡k | Renâ Kub­k "Influence of Elastic Deformations on the Adhesion of the ZRN Coating on the Clinching Tool"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29856.pdf 

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/29856/influence-of-elastic-deformations-on-the-adhesion-of-the-zrn-coating-on-the-clinching-tool/lubo%C5%A1-ka%C5%A1c%C3%A1k

ugc approved journals for engineering, manuscript submission, paper publication for engineering

Effect of Fadama III Community Infrastructure on Farm Profitability of Members of Fadama user Groups (Fugs) in Anambra State, Nigeria

The study evaluateD the effect of FADAMA III community infrastructure on farm profitability of members of FADAMA User Groups FUGs in Anambra state, Nigeria. Specifically, the study determined the effect of rural markets on farm profitability of FUG members effect of rural borehole on farm profitability of FUG members, and effect of processing facilities on farm profitability of FUG members. These objectives were achieved through analysis of cross sectional data which were collected by employing multi stage sampling technique in the four Agricultural zones in Anambra, Awka, Aguata and Onitsha to select 375 respondents out of population of 6,125. Research outcome shows that that provision of rural markets has significant effect on farm profitability of FUG members F ratio = 60.634 significant @ 0.01 provision of water boreholes has significant effect on farm profitability of FUG members F ratio = 34.737 significant @ 0.01 level and provision of cassava processing facilities has significant effect on farm profitability of FUG members F ratio = 27.082 significant @ 0.01 level . The researchers recommended among others provision of agricultural support services such as fertilizer, seedlings, credit and extension services by FADAMA III project managers, so as to boost farming activities and income of FUG members. 

by Ogechukwu C. Nweke | Obianuju E. Agbasi "Effect of Fadama III Community Infrastructure on Farm Profitability of Members of Fadama user Groups (Fugs) in Anambra State, Nigeria"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29880.pdf 

Paper URL: https://www.ijtsrd.com/engineering/agricultural-engineering/29880/effect-of-fadama-iii-community-infrastructure-on-farm-profitability-of-members-of-fadama-user-groups-fugs-in-anambra-state-nigeria/ogechukwu-c-nweke

international journals in engineering, engineering journal, conference issue publication