A Review on Performance of Toll Plaza by using Queuing Theory

One of the key problems in the study of any stream of traffic system is the analysis of delay. Delay is a more delicate concept. It may be well defined as the difference between the actual travel time on a given section and some ideal travel time of that section. This raises the question as what is the ideal travel time. In practice, the ideal travel time chosen will depend on the situation. There are two particular travel times that seem best suited as benchmarks for assessment with the actual performance of the system. These are the travel times under free flow conditions and travel time at capacity. Most recent research has found that for highway systems, there is reasonably little difference between these two speeds. The analysis of delay normally focuses on the delay when demand exceeds its capacity. Such delay is known as queuing delay, and may be studied by means of queuing theory. This theory involves the analysis which is known as a queuing system, which is composed of a server, a stream of customers who demand service, and a queue or line of customers waiting to be served. 

by A. N. V. Ravindra | Mr. S. Siva Gowri Prasad "A Review on Performance of Toll Plaza by using Queuing Theory"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-6, October 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd28068.pdf

Paper URL: https://www.ijtsrd.com/engineering/transport-engineering/28068/a-review-on-performance-of-toll-plaza-by-using-queuing-theory/a-n-v-ravindra

call for paper Communication Engineering, international journal Civil Engineering, ugc approved journals for engineering

Structural System in Resisting the Effect of Lateral Load in High Rise Building

In the structural systems of high rise buildings there are a multitude of structural systems forms, such as twisted, tilted, tapered and free forms. The article describes the characteristics of the diagrid system and its applicability in the construction of tall buildings in relation to other modern construction systems braced tube. This is an attempt to evaluate the effectiveness of this system for G 30 Steel structure. The characteristics of buildings with very complex geometry and that use the diagrid system are presented. 

by Varun S P | B. S. Sureshchandra "Structural System in Resisting the Effect of Lateral Load in High Rise Building"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-6, October 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd28024.pdf

Paper URL: https://www.ijtsrd.com/engineering/structural-engineering/28024/structural-system-in-resisting-the-effect-of-lateral-load-in-high-rise-building/varun-s-p

call for paper Biomedical Engineering, Biomechanical & Biomedical Engineering, ugc approved journals for engineering

A Theoretical Study on Green Concrete Construction

Concrete which are taken from the demolished structures or from concrete waste which are considered to be eco friendly and using it for the purpose of another building construction is called as green concrete construction. This helps to make the future construction eco friendly and also reduce the emission of CO2. Now a days global warming is the major drawback of whole world which is directly or indirectly caused by the civil engineering field. The world consumes concrete more next to water. So it is the duty of every civil engineer to go along the disadvantages of green house gas emission and to reduce their effects in environment. This can be sought by using the eco friendly materials and also the eco friendly waste concrete available in earth. This journal paper would provide the ideas of green construction and also helps to induce the engineers choice of construction. 

by P K Ponsangari "A Theoretical Study on Green Concrete Construction"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-6, October 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29376.pdf

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/29376/a-theoretical-study-on-green-concrete-construction/p-k-ponsangari

call for paper Transport engineering, international journal Agricultural Engineering, ugc approved journals for engineering

Effect of Grafted Silane on Fly Ash Pha Lai - Vietnam to Properties of Polymer Composite Materials Based on Bisphenol A Type Epoxy Resin

Recently, there has been much research on fly ash and its use as a filler in polymer composite materials. However, interfacial adhesion of fly ash with polymer matrix is weak. So, fly ash must be treated to improve interfacial adhesion. This paper reports effect of surface treatments of fly ash particles to mechanical, thermal properties and structure of polymer composites based on DER 331 epoxy resin matrix. The fly ash was treated by silane coupling agent GF 80 and GF 82. The results showed that the mechanical properties of silane GF 80 and GF 82 treated fly ash epoxy resin composites were higher than that of untreated fly ash epoxy resin composites. Specially at FASGF80, tensile strength, flexural strength, compressive strength and impact strength was maximum tensile strength 42.3 MPa increase 21.74 compressive strength 164 MPa increase 18.29 flexural strength 77.8 increase 6.4 and impact strength 7.2 KJ m2 increase 20.83 compare with untreated fly ash composites. 

by Bach Trong Phuc | Nguyen Thanh Liem | Pham Thi Huong "Effect of Grafted Silane on Fly Ash (Pha Lai - Vietnam) to Properties of Polymer Composite Materials Based on Bisphenol A-Type Epoxy Resin"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-6 , October 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29357.pdf

Paper URL: https://www.ijtsrd.com/engineering/chemical-engineering/29357/effect-of-grafted-silane-on-fly-ash-pha-lai---vietnam-to-properties-of-polymer-composite-materials-based-on-bisphenol-a-type-epoxy-resin/bach-trong-phuc

call for paper Civil Engineering, international journal Agricultural Engineering, ugc approved journals for engineering

Cellular Computing

Cellular computing is a discipline that deals with the analysis and modelling of real cellular processes for the purpose of computation. It essentially uses engineering principles to study and manipulate cells. This paper provides a short introduction to cellular computing. We also highlight underlying challenges and avenues of implementations of cellular computing. 

by Matthew N. O. Sadiku | Nana K. Ampah | Sarhan M. Musa "Cellular Computing"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-6 , October 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23385.pdf

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/23385/cellular-computing/matthew-n-o-sadiku

call for paper Manufacturing engineering, international journal Petroleum Engineering, ugc approved journals for engineering

Effect of Copper Slag on Steel Fiber Reinforced Concrete and Conventional Concrete

Because of Rapid growth of technology and population in India, there is a huge demand for construction material mostly for natural sand, of late excessive consumption of sand caused ecological economical imbalance. To overcome these effects large modifications are being carried out in construction industry, i.e. usage of by products as a replacement of fine aggregate. In the present study COPPER SLAG which is a byproduct obtained during production of copper by smelting is used as a replacement of F.A. And also to increase the mechanical properties of concrete different types of fibers are added to the concrete mix. The HOOKED END STEEL FIBRES are added to the concrete to improve the mechanical properties. As several researchers has introduced Steel fiber reinforced concrete SFRC for its inherent superiority over normal plain and reinforced concrete for its higher flexural strength, better tensile strength and modulus of rupture, better ductility and fatigue resistance, crack resistance. This comparative study is carried out on strength properties between SFRC and conventional concrete due to replacement of F.A with copper slag. An experimental investigation was carried out to evaluate the mechanical properties of Steel fiber reinforced concrete by replacement of sand F.A with copper slag for different grades M30, M40. Tests are conducted with 1 addition of hooked end steel fibers having aspect ratio 60 and replacement of copper slag by 0, 10. with an interval of 10 where optimum strength is attained at 50, 40. 

by Shaik Ashraffur Rahaman | K. Srinivas "Effect of Copper Slag on Steel Fiber Reinforced Concrete and Conventional Concrete"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-6, October 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd28038.pdf

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/28038/effect-of-copper-slag-on-steel-fiber-reinforced-concrete-and-conventional-concrete/shaik-ashraffur-rahaman

call for paper Computer Engineering, international journal Mechanical Engineering, ugc approved journals for engineering

Experimental Investigation of U Bolt used in Leaf Spring of an Automobile for Various Loads

Threaded fastener such as U bolts are probably the best choice to apply a desired clamp load to assemble a joint or connection. The main characteristic of holding U bolt of automobile wheel is being under cyclic load which are applied by bumpy rods. So it is necessary to prevent the failure of U bolt under different condition. To do experimental testing for every new design of bolted connection. 

by Hitesh Patil | Dr. S. I. Kolhe "Experimental Investigation of U Bolt used in Leaf Spring of an Automobile for Various Loads"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-6, October 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd29140.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/29140/experimental-investigation-of-u-bolt-used-in-leaf-spring-of-an-automobile-for-various-loads/hitesh-patil

call for paper Industrial Engineering, international journal Nuclear Engineering, ugc approved journals for engineering