FPGA Based Digital Logic Circuits Operation for Beginners

This paper presents the operations of digital circuits based on FPGA. The long term of FPGA is field programmable gate array. FPGA is an integrated circuit designed to be configured by a customer or a designer after manufacturing  hence field programmable . The operations of logic circuits such as logic gates, flip flop and 7 segment are tested using quartus II software and DE2 115 and DE1 FPGA development kits in this paper. Particularly, there are three main portions such as implementation of schematic diagram, designing of the vhdl program, the connection of the control panel and displaying the result of logic circuits on FPGA kit. The operations of combinational circuits are tested by designing the VHDL programs. And then the operations of sequential circuits are observed and displayed the results of them by illustrating the schematic diagrams. 

by San San Naing | Ni Ni San Hlaing | Cho Thet Nwe "FPGA Based Digital Logic Circuits Operation for Beginners"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd26372.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26372/fpga-based-digital-logic-circuits-operation-for-beginners/san-san-naing

call for paper Structural Engineering,  international journal Transport engineering, ugc approved journals for engineering

A Research Article on Synthesis of Metal Nano Particles by Chemical Reduction Method

Nanotechnology is an experimental and engineering technology manipulate at the nanoscale, such as in the field of different compound fabric synthesizing, food processing agriculture processing and as well as in medicinal application. Due to their physical and chemical applications the metal nanoparticles have a great interest in research. A variety of physical, chemical and biological method that can be used for the synthesis of the metal nanoparticle. All the methods have positive advantages as well as some obstruction. In this following review we try to explain recent research on the synthesis and various application of metal nanoparticle. We summarized the different chemical reduction method and briefly explain their application. 

by Vijay Aithekar | Dr. Sangeeta Gautam "A Research Article on Synthesis of Metal Nano Particles by Chemical Reduction Method"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd26371.pdf 

Paper URL: https://www.ijtsrd.com/physics/nanotechnology/26371/a-research-article-on-synthesis-of-metal-nano-particles-by-chemical-reduction-method/vijay-aithekar


call for paper Environmental Engineering, international journal Food Engineering, ugc approved journals for engineering

Knowledge Discovery in Classification and Distribution of Butterfly Species From Dagon University Campus, Myanmar by Rule Induction CN2 Algorithm

Rule induction is an area of machine learning in which formal rules are extracted from a set of observations. The CN2 induction algorithm is a learning algorithm for rule induction. In this research, "The Fauna of British India, Ceylon and Burma. Butterflies. Vol. I and Vol. II" written by C.T Bingham are used as the required knowledge for the resource. This research applies the CN2 algorithm to discover the knowledge of butterfly species rules for classification from Dagon University campus and a system has also developed. In this system, 29 butterflies as a zoological dataset, MS Visual Studio 2012 as a programming tool and MS SQL Server as for database development are used. 

by Su Myo Swe | Khin Myo Sett "Knowledge Discovery in Classification and Distribution of Butterfly Species From Dagon University Campus, Myanmar by Rule Induction: CN2 Algorithm"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd26380.pdf 

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/26380/knowledge-discovery-in-classification-and-distribution-of-butterfly-species-from-dagon-university-campus-myanmar-by-rule-induction-cn2-algorithm/su-myo-swe

call for paper Food Engineering, international journal Nuclear Engineering, ugc approved journals for engineering

Real Time Eye Blinking and Yawning Detection

Detecting eye blink and yawning is important, for example in systems that monitor the vigilance of the human operator, eg Driver's drowsiness. Driver fatigue is one of the leading causes of the worlds deadliest road accidents. This shows that in the transport sector in particular, where a driver of heavy vehicles is often open to hours of monotonous driving which causes fatigue without frequent rest periods. It is therefore essential to design a road accident prevention system that can detect the drivers drowsiness, determine the drivers level of carelessness and warn when an imminent danger occurs. In this article, we propose a real time system that uses eye detection techniques, blinking and yawning. The system is designed as a non intrusive real time monitoring system. The priority is to improve driver safety without being intrusive. In this work, the blink of an eye and the drivers yawn are detected. If the drivers eyes remain closed for more than a certain time and the drivers mouth is open to yawning, the driver is said to be fatigue. 

by Ohnmar Win "Real Time Eye Blinking and Yawning Detection"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5, August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd28004.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/28004/real-time-eye-blinking-and-yawning-detection/ohnmar-win

call for paper Environment Engineering, international journal Industrial Engineering, ugc approved journals for engineering

Design and Calculation of Solar Power Plant in Myanmar

PV technology is the most famous among the several renewable energy technologies that was adopted globally. According to Myanmar weather condition, solar power plants are the best renewable energy source to provide electricity for both urban and rural areas. The case study is selected Tat Thit Kyun where is situated Latitude 18°44N and Longitude 95°11E 5.6 mile away from Padaung Township. 312 kWh demand is needed for 387 numbers of household. Data is obtained from Meteorological data of the village and NASA. 

by Dr. Zarchi San | Dr. Than Zaw Htwe | Daw Thidar Win Ngwe "Design and Calculation of Solar Power Plant in Myanmar"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5, August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd27999.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/27999/design-and-calculation-of-solar-power-plant-in-myanmar/dr-zarchi-san

call for paper Industrial Engineering, international journal Nuclear Engineering, ugc approved journals for engineering

Implementation of Lower Leg Bone Fracture Detection from X Ray Images

A methodology and various techniques are presented for development of fracture detection system using digital image processing. This paper presents an implementation of bone fracture detection using medical X ray image. The goal of this paper is to generate a quick and diagnosis can save time, effort and cost as well as reduce errors. The main objective of this research is to classify the lower leg bone fracture using X ray image because this type of bone are the most commonly occur in bone. This paper classifies the two types of fracture Non fracture and fracture or Transverse fracture by using SVM classifier. The proposed system has basically five steps, namely, image acquisition, image pre processing, image segmentation, feature extraction and image classification. 

by San Myint | Khaing Thinzar "Implementation of Lower Leg Bone Fracture Detection from X-Ray Images"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5, August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd27957.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/27957/implementation-of-lower-leg-bone-fracture-detection-from-x-ray-images/san-myint

call for paper Electrical Engineering, international journal Forestry Engineering, ugc approved journals for engineering

Microstructural and Mechanical Properties Analysis of Plasma ARC Welded 316L Austenitic Stainless Steel Joints without Addition of Filler Material

Plasma Arc Welding PAW is one of the important arc welding process commonly using as aerospace, medical, power plants, and automobile industry. Especially stainless steel 316L SS316L has been successfully utilized in many sectors because of its excellent corrosion resistance, self healing property, and biocompatibility, high fatigue life and creep resistance. The paper focuses on weld quality characteristics like weld bead geometry, grain size, hardness and ultimate tensile strength of PAW welded joints of austenitic stainless steels AISI 316L. From the analysis carried out it is noticed that AISI 316L has achieved sound weld bead geometry, good tensile strength and hardness. Welding of Low Nickel Chrome manganese Austenitic is an emerging area of research. Due to nickel price volatility, there was been increased interest in no nickel or low nickel economical grades of stainless steel. Chrome manganese austenitic "standard 200 series" and ferritic stainless steel "standard 300 series" grades with well defined technical properties have proved acceptable materials for specific applications for many years. This increase in the use and production of these low nickel grades is not currently matched by a proper level of user knowledge. So there is a risk that they may be used in unsuitable applications. It is very important to cultivate the method of fabrication like welding. This paper looks at the behaviour of low nickel chrome manganese austenitic stainless steel in terms of microstructure and sensitization effects upon welding by PAW process. In this project, we performed 5 mm thick AISI 316L bead on and joint using PAW. Further study the geometric analysis, microstructure, micro hardness, tensile strength, SEM analysis and TAGUCHI analysis of the welded work pieces and analyzed the benefits and shortcoming methods. 

by Arka Ghosh | Mr. T. K. Bhattachraya | Mr. N. V. Deshpande | Dr. Sushovan Basak "Microstructural and Mechanical Properties Analysis of Plasma ARC Welded 316L Austenitic Stainless Steel Joints without Addition of Filler Material"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd26478.pdf 

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/26478/microstructural-and-mechanical-properties-analysis-of-plasma-arc-welded-316l-austenitic-stainless-steel-joints-without-addition-of-filler-material/arka-ghosh

call for paper Automotive Engineering, international journal Electrical Engineering, ugc approved journals for engineering