Arduino Based Automatic Car Washing System

In this modern era automation helps us to save time, cost as well as manpower. Vehicles are used extensively for transportation. To clean these vehicles there is a need of a proper washing system. The most common problems often encountered while cleaning these vehicles are consumption of water, manpower and time. The easy and effective systems for maintaining the vehicles cleanliness become high demand. Therefore, this paper focuses on car washing system using ARDUINO. The exterior of the car will be washed by detecting the car on conveyor belt and the processes are controlled by ARDUINO. The sensors are placed on conveyor belt at different places for car detection, washing, cleaning and drying. This system can be applied in car manufacturing companies after final assembly of car, service stations, car replacing and maintaining stations, and car body building industry. 

by Kyaw Kyaw Lin "Arduino Based Automatic Car Washing System"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5, August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd27817.pdf 

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/27817/arduino-based-automatic-car-washing-system/kyaw-kyaw-lin

call for paper Environment Engineering, international journal Industrial Engineering, ugc approved journals for engineering

3G Drive Test Analysis for Long Call in University Campus

Mobile communication is developing very rapidly with passage of time, new technologies are being introduced to facilitate the mobile user more from the technology. The past technologies are replaced by new ones and needs are growing for the new technologies to be developed. Just within a decade, an evolution of wireless service people used every day can be completely dumb founded from the roots of analog based first generation service 1G to today's truly broadband ready fourth generation networks. Drive Test is conducted for checking coverage criteria of a cell site with RF Drive Test tool. The data collected by Drive Test tool as log files is analyzed to evaluate various RF parameters of the network. And it's very important things for mobile service provider. This paper is to study about the analysis of long call Drive Test for third generation 3G networks to evaluate the performance of QoS Quality of Service using TEMS Investigation 16.3.3 software and TEMS Discovery 10.0.6 software. 

by Aye Myat Myat Myo | Zar Chi Soe "3G Drive Test Analysis for Long Call in University Campus"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5, August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd26777.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26777/3g-drive-test-analysis-for-long-call-in-university-campus/aye-myat-myat-myo

call for paper Food Engineering, international journal Nuclear Engineering, ugc approved journals for engineering

A Result on Novel Approach for Load Balancing in Cloud Computing

Cloud computing is a large pool of system in which private or public networks are interconnected in order to provide the scalable infrastructure to application, data and file storage. It is considered as the computer archetype in which large amount of information is stored. It helps in the significant reduction of the cost of computation, application hosting, content storage and delivery. In order to experience direct cost benefits, cloud computing is considered as a practical approach and it can possibly transform a data center from a capital intensive set up to a variable priced environment. It provides the feasibility to its customers that they can access their information from anywhere they want. Therefore, cloud overcomes the limitation of the location constraint. As compared to traditional concepts, cloud computing coveys the concept of the grid computing, distributed computing, utility computing or autonomic computing. When any virtual machine gets overloaded, fault may occur in the cloud environment. With the help of BFO algorithm, technique of adaptive task scheduling is proposed. Using this method, it becomes easy to transfer the task to the most reliable virtual machine. On the basis of calculated weight at virtual machine, the reliability of the virtual machine is calculated. The proposed and existing algorithms have been implemented in CloudSim. On the basis of the simulation results, it is concluded that the proposed method shows the reduction in the execution time as compared to existing technique. 

by Sukhdeep Kaur | Preeti Sondhi "A Result on Novel Approach for Load Balancing in Cloud Computing"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd26362.pdf 

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/26362/a-result-on-novel-approach-for-load-balancing-in-cloud-computing/sukhdeep-kaur

call for paper Computer Engineering, international journal Mechanical Engineering, ugc approved journals for engineering

Study on Physical and Mechanical Properties of Historical Timber Building in Myanmar A Case Study of Pyay Hostel in Yangon University Campus

The assessment of existing timber structures requires the determination of the physical and mechanical properties of the individual timber members, which is often obtained by visual grading combined with information of small clear wood specimens. This study aims to investigate the properties of timber members for the seismic safety assessment and evaluation of existing timber building, Pyay Hostel situated in Yangon University. Because this building has been established in 1924, its life time is near 100 years and has some circumstances such as alteration of uses and detection of deterioration. The physical and mechanical properties of existing timber members such as moisture content, specific gravity, static bending, compression parallel to grain, compression perpendicular to grain, tension parallel to grain and shear parallel to grain are determined by experiment in the Structural Laboratory, Civil Engineering Department, YTU. According to the experimental results, it is found that the physical properties of teak and pyingado used in this building are 10 and 14 of moisture content, and 0.56 and 0.8 for specific gravity. In the mechanical properties of timber members, the modulus of elasticity values for Teak and Pyingado are obtained 2.79x106 psi and 3.88x106 psi, and the modulus of rupture values of Teak and Pyingado are 1.94x104 psi and 2.81x104 psi respectively. On the other hand, it is found that the compressive strength of Teak and Pyingado are 636.69 psi and 1210.75 psi respectively. This investigation results are reasonable and applicable to use seismic safety assessment and evaluation of existing timber building. 

by Kyaw Kyaw | Wai Yan Soe "Study on Physical and Mechanical Properties of Historical Timber Building in Myanmar: (A Case Study of Pyay Hostel in Yangon University Campus)"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5, August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd27959.pdf 

Paper URL: https://www.ijtsrd.com/engineering/structural-engineering/27959/study-on-physical-and-mechanical-properties-of-historical-timber-building-in-myanmar-a-case-study-of-pyay-hostel-in-yangon-university-campus/kyaw-kyaw

call for paper Environmental Engineering, international journal Food Engineering, ugc approved journals for engineering

To Study the Effect of Use of Geosynthetics Fibres in Sub grade Soil

Reinforcements and separation are the two functions of Geosynthetics in which pavement system is used in geogrids. The apertures are used in the products of geogrids. These products are mostly in large size and due to this,they are not used for getting separation of different materials. Gradation has main function to separate two different materials. Still, in theoretically geogrids can also give some separation mathods, but in a limited amount. In pavements, geogrids used separation method which is a secondary function or we can say it is use for some sepration of different materials and in reinforcement, geogrids used the primary function in pavements and geogrid used to improve the mechanically properties of engineering like M25 Grade Concrete. The reinforcement mechanisms associated with geogrids. 

by Er. Kapil Soni | Er. Sunil Kumar | Er. Vikram "To Study the Effect of Use of Geosynthetics Fibres in Sub grade Soil"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd26479.pdf

Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/26479/to-study-the-effect-of-use-of-geosynthetics-fibres-in-sub-grade-soil/er-kapil-soni

call for paper Industrial Engineering, international journal Nuclear Engineering, ugc approved journals for engineering

Design and Analysis of Pelton Wheel

This paper describes the design and analyzes the Pelton wheel for generating power of 400 Watt. A Pelton wheel is considered as an impulse turbine, a turbine that converts pressure head into velocity head. This thesis is to calculate the input power, output power, buckets and speed ratio, length of belt and efficiency of the turbine. The turbine with a jet diameter of 0.0254 m has been designed for the operational conditions of the Pelton wheel installed at the Mone Ta Wa Cave, Ayetharyar. The diameter of the runner is 0.254 m and the width of a bucket is 0.1143 m. The turbine has undergone efficiency testing and visual inspection during operation at a gross head of 20 m. The hydraulic efficiency is 96.35 and the output power is 400 Watt. 

by Ma Myat Win Khaing | Ma Yi Yi Khin | Mg Than Zaw Oo "Design and Analysis of Pelton Wheel"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5, August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd26477.pdf 

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/26477/design-and-analysis-of-pelton-wheel/ma-myat-win-khaing

call for paper Biomedical Engineering, international journal Nanotechnology, ugc approved journals for engineering

Folded Shorted Patch Antenna with Slots for RF Energy Harvesting in Wireless Sensor Network

There are various types of microstrip antenna that can be used for many applications in communication systems. This paper presents the design of a folded shorted patch antenna FSPA for the application of Radio Frequency RF energy harvesting system capable of receiving radio frequency of GSM 900 band 860MHz to 960MHz. The antenna is designed using microstrip technology on an FR 4 substrate with a dielectric constant of 4.4 and a thickness of 1.6. The antenna was designed and simulated using FEKO, the Electromagnetic solver software. One slot is incorporated into the upper patch of the FSPA. Simulated results show that this antenna can attain an impedance bandwidth of 32MHz from 884MHz to 916MHz at the center frequency of 900MHz with the slot. The results also reveal the good unidirectional radiation pattern and the stable gain over the operating frequency. This antenna is well compatible with using RF energy harvesting to receive the signal of the GSM 900 band. 

by Aye Thet Mon | Chaw Myat Nwe "Folded Shorted Patch Antenna with Slots for RF Energy Harvesting in Wireless Sensor Network"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd26476.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26476/folded-shorted-patch-antenna-with-slots-for-rf-energy-harvesting-in-wireless-sensor-network/aye-thet-mon

call for paper Communication Engineering, international journal Chassis Engineering, ugc approved journals for engineering