Monitoring Section of IoTs Smart Garbage System

Nowadays certain actions are taken to improve the level of cleanliness in the country. The proposed system introduces the design and development of smart green environment of garbage monitoring system by measuring the garbage level in real time and to alert the municipality where the bin is full based on the types of garbage. Thus, Smart Garbage bin was built which is interfaced with Ultrasonic sensor, GPS module and Wi Fi module Node MCUs .In this system, we will put a sensor on top of the garbage bin which will detect the total level of garbage inside it according to the total size of the bin. Once the trash increases the threshold level, the notification will pop up in Blynk server. The real time status of how waste collection is being done could be monitored the bins where GPS is shown. Then, the employees can take further actions to empty bins. It is expected that this system can create greener environment by monitoring the collection of garbage smartly through Internet of Things. 

by Thandar Hein | Chaw Myat Nwe "Monitoring Section of IoTs Smart Garbage System" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd25284.pdf

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/25284/monitoring-section-of-iots-smart-garbage-system/thandar-hein

call for paper Telecommunications, international journal Information Technology, ugc approved journals for engineering

Cloud Data De Duplication in Multiuser Environment DeposM2

Nowadays, cloud computing produce a huge amount of sensitive data, such as personal Information, financial data, and electronic health records, social media data. And that causes duplication of data and that suffers to storage and performance of cloud system. Data De Duplication has been widely used to eliminate redundant storage overhead in cloud storage system to improve IT resources efficiency. However, traditional techniques face a great challenge in big data De Duplication to strike a sensible trade off between the conflicting goals of scalable De Duplication throughput and high duplicate elimination ratio. De Duplication reduces the space and bandwidth requirements of data storage services, and is most effective when applied across multiple users, a common practice by cloud storage offerings. I study the privacy implications of cross user De Duplication. Thus, an interesting challenging problem is how to deduplicate multimedia data with a multi user environment and propose an efficient system to overcome these types of problems. In this paper, I introduce a new primitive called Depos M2 which gives a partial positive answer for these challenging problem. I propose two phases De Duplication and proof of storage, where the first one allows De Duplication of data and letter one allows proof of storage that means give permission to respective user i.e. owner of that file. 

by Mr. Kaustubh Borate | Prof. Bharti Dhote "Cloud Data De-Duplication in Multiuser Environment: DeposM2" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd25270.pdf

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/25270/cloud-data-de-duplication-in-multiuser-environment-deposm2/mr-kaustubh-borate

call for paper Communication Engineering, international journal Chassis Engineering, ugc approved journals for engineering

CNC Drilling Machine for Printed Circuit Board

In this system, an Arduino based 3 axis CNC drilling machine for printed circuit board is implemented using Arduino controller, CNC router and open source software for controlling the whole operation. This can be the invention for the electronic industries and electronic students which can design the production as desired. This CNC machine is able to draw a circuit layout on PCB or any other solid surface using simple algorithm and available components. At first, the user need to design PCB layout using eagle software which is directly generated G code and then feed it to the machine using candle software. Arduino Uno with an AT mega 328 microcontroller is used as main controller for this system. The microcontroller converts G code into a set of machine language instruction to be sent to the motor driver of the CNC machine. This system can provide to drill in less time and increase the flexibility. 

by Moe Myint Aung | Nwe Nwe Oo | May Thwe Oo "CNC Drilling Machine for Printed Circuit Board" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd25290.pdf

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/25290/cnc-drilling-machine-for-printed-circuit-board/moe-myint-aung

call for paper Textile Engineering, international journal Software Engineering, ugc approved journals for engineering

Software Implementation of Iris Recognition System using MATLAB

The software implementation of iris recognition system introduces in this paper. This system intends to apply for high security required areas. The demand on security is increasing greatly in these years and biometric recognition gradually becomes a hot field of research. Iris recognition is a branch of biometric recognition method. In thesis, Iris recognition system consists of localization of the iris region and generation of data set of iris images followed by iris pattern recognition. In thesis, a fast algorithm is proposed for the localization of the inner and outer boundaries of the iris region. Located iris is extracted from an eye image, and, after normalization and enhancement, it is represented by a data set. Using this data set a Neural Network NN is used for the classification of iris patterns. The adaptive learning strategy is applied for training of the NN. The implementation of the system is developed with MATLAB. The results of simulations illustrate the effectiveness of the neural system in personal identification. Finally, the accuracy of iris recognition system is tested and evaluated with different iris images. 

by Mo Mo Myint Wai | Nyan Phyo Aung | Lwin Lwin Htay "Software Implementation of Iris Recognition System using MATLAB" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd25258.pdf

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/25258/software-implementation-of-iris-recognition-system-using-matlab/mo-mo-myint-wai

call for paper Industrial Engineering, international journal Nuclear Engineering, ugc approved journals for engineering

System Consideration, Design and Implementation of Point To Point Microwave Link for Internet Access

Microwave technology is extremely used for point to point communications because it is more easily focused into narrower beams than radio waves, allowing frequency use, it is available higher data transmission rates and antenna sizes are smaller than at lower frequencies. The main aim of this system is to provide internet access for rural area using ePMP Force 180 5GHz subscriber module. The two sites are 1.45 km away from each other. GPS is used to determine the latitude and longitude of two sites location. Google Earth Pro software is used to check for line of sight in choosing potential terminal site locations. In this system, system consideration, design and analysis of line of sight microwave link and hardware implementations are to be carried out. In the analysis, path profile, Fresnel zone, link budget and other parameters are implemented using the link planner software 

by Lay Nandar Soe | Kyaw Thet Zaw | Wai Phyo Aung "System Consideration, Design and Implementation of Point-To-Point Microwave Link for Internet Access"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5, August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd26769.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26769/system-consideration-design-and-implementation-of-point-to-point-microwave-link-for-internet-access/lay-nandar-soe

call for paper Chemical Engineering, international journal Food Engineering, ugc approved journals for engineering

Design and Implementation of All Optical Tunable Delay by the Combination of Wavelength Conversion and Fiber Dispersion

In this paper we have designed and implemented an all optical tunable delay element using the combination of wavelength conversion and fiber dispersion. We present wavelength conversion method that show with FWM. The characteristics of the proposed all optical based techniques for tunable delay element are discussed theoretically and demonstrated experimentally. This element operates near 1550nm and generates delay time range is 2430ps. 

by Pyae Phyo Swe | Tin Tin Ohn "Design and Implementation of All-Optical Tunable Delay by the Combination of Wavelength Conversion and Fiber Dispersion"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5, August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd27874.pdf 

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/27874/design-and-implementation-of-all-optical-tunable-delay-by-the-combination-of-wavelength-conversion-and-fiber-dispersion/pyae-phyo-swe

call for paper Manufacturing engineering, international journal Petroleum Engineering, ugc approved journals for engineering

Design and Implementation of Conveyor Belt Speed Control using PID for Industrial Applications

A conveyor system is a common piece of mechanical handling equipment that moves materials from one location to another. Many kinds of conveying systems are available, and are used according to the various needs of different industries. The purpose of this project is to improve the existing conveyor machine that located at the methodology lab in AL FALAH UNIVERSITY. This paper gives a review of the belt conveyor technology that focuses on the types of drives and the control system or the controller of the belt conveyor using PID controller. This paper highlights the characteristics, performance measure, requirements and the operational procedure of the belt conveyor drives and control systems. 

by Muhammad Shahid | Md Ghaysuddin "Design and Implementation of Conveyor Belt Speed Control using PID for Industrial Applications" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd25294.pdf

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/25294/design-and-implementation-of-conveyor-belt-speed-control-using-pid-for-industrial-applications/muhammad-shahid

call for paper Geological Engineering, international journal Gas Engineering, ugc approved journals for engineering