Monday, June 3, 2019

Solar and Electric Powered Hybrid Vehicle


This system is designed to prevent green house effect caused due to the burning of fossil fuel and reduce pollution for the environment. The designing, construction and implementation of the Solar and Electric Powered Hybrid Vehicle SEPHV are expressed in this paper. The power supply of the SEPHV can be charged by the solar and normal AC power source too. In this system, the series combination of 12V six lead acid batteries is used for the driving motor power supply 40~60V DC . The 50W six solar panels are used for charging each of batteries. The charge controller is designed to be the supply batteries with the minimum amount charge possible and to protect from overcharge by the solar panels as well as over discharge by the driving motor. In this SEPHV, wireless message display system is also designed by Arduino software. The weight of the car without load is 300kg. As the results, this SEPHV is capable of accommodating at least four persons 250kg with an average speed of 57km hr. By using this, we can be able to reduce the all kind pollutions and fuel economy. 


BY Ma Naing | May Thwe Oo | New Nwe Oo "Solar and Electric Powered Hybrid Vehicle"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd24038.pdf

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/24038/solar-and-electric-powered-hybrid-vehicle/ma-naing

international peer reviewed journal, high impact factor, manuscript publication

The Review of Energy Efficient Network


Energy consumption is a primary concern in design and operation of wireless communication networks based on environmental concern and cost. The coming 5G network proposes better data rates but also speaks about energy efficiency in its agenda. In order to achieve high energy efficient. 


BY Manvi Chib | Tamanna Pathania "The Review of Energy Efficient Network" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, 

URL: https://www.ijtsrd.com/papers/ijtsrd24036.pdf

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/24036/the-review-of-energy-efficient-network/manvi-chib

peer reviewed journals, international peer reviewed journal, high impact factor

Sunday, June 2, 2019

Spectrum Handoff Decision Schemes and Cognitive Radio Network


Due to the growth and spread of wireless devices in the unlicensed spectrum bands, such as ISM, the bands become more and more crowded and therefore affect the performance of the wireless networks negatively. Thus, the cognitive spectrum access principles are required to utilize the existing spectrum bands more efficiently. There are many advantages of cognitive radio technology but there exists some obstacles like the CRT Cognitive Radio Technology is used over a heterogeneous radio spectrum of licensed and unlicensed spectrum bands and as for survey huge work in done in licensed spectrum bands and very small of work done in the amalgamation licensed and unlicensed bands for data transportation. 


BY Harera Mehmood Khan | Harjit Singh Kainth "Spectrum Handoff Decision Schemes and Cognitive Radio Network"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd24034.pdf

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/24034/spectrum-handoff-decision-schemes-and-cognitive-radio-network/harera-mehmood-khan

multidisciplinary journal, peer reviewed journals, international peer reviewed journal

Vegetable Cultivation An Alternative Horticultural Farming in Kurnool District, Andhra Pradesh


In India nearly about 10.1 million hectares of area is under vegetable farming. The country is the largest producer of ginger and okra amongst vegetables and ranks second in the production of Potatoes, Onions, Cauliflower, Brinjal, Cabbage etc. India's diverse climate ensures availability of a variety of vegetables. As per National Horticulture Board, during 2015 16, India produced 169.1 million metric tonnes of vegetables. The vast production base offers India, tremendous opportunities for the export. During 2017 18 India exported fruits and vegetables worth Rs. 9410.81 crores in which vegetables comprised of Rs 5181.78 crores. Keeping the importance of vegetable farming in view, an endeavour is made here to study the spatial patterns of vegetable crop cultivation in Kurnool District, Andhra Pradesh. 


BY Kanthi Kiran, K | Krishna Kumari, A "Vegetable Cultivation: An Alternative Horticultural Farming in Kurnool District, Andhra Pradesh"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23980.pdf

Paper URL: https://www.ijtsrd.com/engineering/agricultural-engineering/23980/vegetable-cultivation-an-alternative-horticultural-farming-in-kurnool-district-andhra-pradesh/kanthi-kiran-k

special issue publication, multidisciplinary journal, peer reviewed journals

Compatibility Design of Non Salient Pole Synchronous Generator


This paper is focused design calculation of 30 MVA, 11 kV, 50 Hz, two pole non salient poles synchronous generator that use in gas turbine power plant. The choices of specific loadings are magnetic loading and electric loading are involved in that design calculation. The number of rotor slot selection main considered in order to avoid the undesirable effects of harmonics in the flux density wave forms. The rotors are cylindrical in shape having parallel slots on it to place rotor windings. The design system is compatibility based on where specific magnetic loading or specific electric loading with synchronous generator generate more electrical power and to get better performance. The relation between specific loading and volume of the generator, short circuit ratio and air gap length, comparison design data and efficiency due to load changing are mainly emphasized studying in this paper. 


BY Thant Zaw Oo | Aye Myo Thant "Compatibility Design of Non-Salient Pole Synchronous Generator"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd24026.pdf

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/24026/compatibility-design-of-non-salient-pole-synchronous-generator/thant-zaw-oo

conference issue publication, special issue publication, multidisciplinary journal

IoT Based Home Automation System over Cloud


Internet of Things IoT is a system of interrelated computing devices where all the things, including every physical object, can be connected making those objects intelligent, programmable and capable of interacting with humans. As more and more data are generated each day, IoT and its potential to transform how we communicate with machines and each other can change the world. The user operates the smart home devices year in year out, have produced mass operation data, but these data have not been utilized well in the past. This project focuses on the development of home automation system based on internet of things which allows the user to automate all the devices and appliances of home and merge them to provide seamless control over every side of their home. The data can be used to predict the user's behavior custom with the development of a machine learning algorithm, and then the prediction results can be employed to enhance the intelligence of a smart home system. The designed system not only gives the sensor data but also process it according to the requirement, for example switching on the light when it gets dark and it allows the user to control the household devices from anywhere. The cloud is used to send the sensor data through Wi Fi module and then a decision tree is implemented which decides the output of the electronic devices also, it is used to achieve the power control and local data exchanging which provide the user interface, store all the information corresponding to the specific house, and query the function information of an individual home appliance. 


BY Prof. Madhu B R | Vaishnavi K R | Dushyanth N Gowda | Tushar Jain | Sohan Chopdekar "IoT Based Home Automation System over Cloud"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd24005.pdf

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/24005/iot-based-home-automation-system-over-cloud/prof-madhu-b-r

research publication, conference issue publication, special issue publication

Saturday, June 1, 2019

Printed Antenna Design and Simulation for 5G using HFSS


With expanding number of users, the demand for better technology also increases. The fifth Generation 5G technology would be one of the best technologies to meet the need of increased capacity demand, massive connectivity better speed by using the large amount of spectrum in the millimeter wave band, with 5G it is expected to get 80 100 Mbps speed. The need for 5G technology, methodology designing of antenna and various simulations is offered. The micro strip patch antenna is used here in 5G technology is relatively inexpensive to manufacture and design because of its simple physical geometry. Micro strip Patch Antenna shows multi band characteristics and has a compact structure and hence has emerged as a promising candidate for handheld devices the proposed idea is implemented by using HFSS software which is used for antenna designing 


BY Mahvish | Tanika "Printed Antenna Design and Simulation for 5G using HFSS"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd24011.pdf

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/24011/printed-antenna-design-and-simulation-for-5g-using-hfss/mahvish

paper publication for student, research publication, conference issue publication