Drunk and Drive Detection using Raspberry Pi

In this modern era unnatural deaths are increasing day by day but major part of the unnatural deaths are caused by the drunk driving. Driving while drunk is very dangerous and it leads to vehicle crashes , roadway wounds. Many preventions measures had been taken likewise seizing vehicle permit, fine and punishment, seizing licence. Despite the fact that many prolepsis have been taken still the percentage of accidents due to drunk driving is increasing. This module is proposed to prevent people from unnecessary deaths caused by road accidents due to drunken driving. This module consists of Raspberry Pi model 3, alcohol detection sensor MQ 3 , GPS module and relay to control speed. A. 

BY Siri Pallavi | K. Varun Kumar | T. Vamsi Krishna | S. Sandeep | T. S. Jyothi Lakshmi "Drunk and Drive Detection using Raspberry Pi"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23251.pdf

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23251/drunk-and-drive-detection-using-raspberry-pi/a-siri-pallavi

paper publication in management, best journal, research papers

Design and Analysis of Crankshaft for Internal Combustion Engine

In this project design and analysis of the crankshaft for the combustion engine. These components have a large volume component with complex geometry and need huge investment. These will be converts reciprocating or linear motion of the piston into a rotary motion. In this project the product is modeled in a 3D model with all available constraint by using advanced cad software CATIA V5. this model will be converted to initial graphics exchange specification IGES format and imported to ANSYS workbench to perform static analysis. Finite element analysis FEA is performed to obtain the various stress and critical location of crankshaft under loads by using ANSYS software. This project helps to many researchers to select best material to production of crankshaft. 

BY Md. Hameed | Chova Deekshith | Gorge Bhanu Prasad | Chalamala Teja "Design and Analysis of Crankshaft for Internal Combustion Engine" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23531.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23531/design-and-analysis-of-crankshaft-for-internal-combustion-engine/md-hameed

paper publication in science, paper publication in management, best journal

IoT Based Smart Horticulture Monitoring System

For smart horticulture system, one person take care of everything is some difficult due to his busy life style, but the healthy food and financially feasible life time is very important. Now a days the vegetables containing more chemical wastages that affect the human life time. The smart horticulture systems provide the each one to create the food healthy and ensure the quality of the vegetables to create home itself using this horticulture. The normal person can keep the horticulture running and the plants healthy in case the primary person becomes unavailable. The horticulture production needs less labour, less capital, has faster returns than normal production. And it cannot be easily influenced by the climate. Therefore the nurseries are wanted subsequent to next to vegetable under growers. It be extremely easier said than done en route for be alive inside incriminate of scattered horticulture lacking a isolated atmosphere monitor arrangement. In current technology, there appeared a canopy remote monitoring system based on Ethernet. In this system we make use of dissimilar module such since Global System Monitoring, 8051 next to the alike moment as organizer, be on fire detecting antenna, warmth detect feeler, dampness detect feeler, and exhibit the being there of gab resting on 16X2 LCD lying on the receiver surface. If any gas exceeds the value automatically send alert message has to be given to concerned person .whether prediction can be predicted by using machine learning technique so we aware of the whether condition due to climate changes. This project is created as a product and gives the healthy life and small scale level business. 

BY Shahin. K | Kanimozhi. R | Balachandar. A "IoT Based Smart Horticulture Monitoring System"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23466.pdf

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/23466/iot-based-smart-horticulture-monitoring-system/shahin-k

paper publication for engineering, paper publication in science, paper publication in management

Generalized Unified Power Quality Conditioner UPQC System with an Improved Control Method Under Distorted and Unbalanced Load Conditions

This paper deals with the power quality condition which is the integration of the series active and shunt active filter the main concept is that while considering the harmonic distortion or the voltage mitigation problem of the device UPQC usually compensate various element of the power system which has a negative impact on the system by eliminating it UPQC is a reliable device due to its nominal cost and fast response with low error handing capabilities. Whenever we consider any transmission and distribution system there are many electrical loads which are very important for the facing of the voltage variation .This paper present a novel method through which we will developing a control method for shunt active filter and PQ theory based control technique for series active filter to compensate power problem in a 3 phase four wire UPQC .The purpose UPQC will improve the power quality of power distribution system under balanced and distorted load condition. The control scheme used is the hysteresis voltage controller by using a b c to d q transformation. 

BY Shraddha Bele | Pratik Ghutke "Generalized Unified Power Quality Conditioner (UPQC) System with an Improved Control Method Under Distorted and Unbalanced Load Conditions"

Published in International Journal of Trend in Scientific Research an
d Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23659.pdf

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/23659/generalized-unified-power-quality-conditioner-upqc-system-with-an-improved-control-method-under-distorted-and-unbalanced-load-conditions/shraddha-bele

call for paper engineering, call for paper science, call for paper technology

A Literature Survey on Security Management Policies used in Wireless Domain

Wireless is a term used to describe telecommunications in which electromagnetic waves rather than some form of wire carry the signal over part or the entire communication path. Some monitoring devices, such as intrusion alarms, employ acoustic waves at frequencies above the range of human hearing these are also sometimes classified as wireless. Wireless network security is the process of designing, implementing and ensuring security on a wireless computer network. Nowadays wireless networks are the most popular way of communication. For example, internet services in companies, cafes, e markets and in homes. This paper will highlight the drawbacks and their proposed system to give continuous growth of new technologies in wireless domain, both for application and basic research. Papers should emphasize original results relating to the theory and or applications of wireless communications and networking. 

BY K. Senthil Kumar | P. Supraja | V. Sridharshini "A Literature Survey on Security Management Policies used in Wireless Domain"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd22854.pdf

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/22854/a-literature-survey-on-security-management-policies-used-in-wireless-domain/k-senthil-kumar

call for paper, call for paper engineering, call for paper science

Implementation of Fuzzy Based Grid Tied PV System for Single Phase Transformer less Inverter with Charge Pump Circuit Concept

This paper proposes a implementation of a single phase transformer less photovoltaic inverter for grid connect PV system. We are developing new topology to eliminate the leakage current in which concept of charge pump circuit is introduced. In this paper, for controlling purpose we are utilizing Fuzzy Logic Controller. The neutral of the grid is directly connected to the negative polarity of the PV panel that creates a constant common mode voltage and zero leakage current. During the negative cycle, the charge pump circuit generates the negative output voltage of the proposed inverter. Therefore, according to the proportional resonant control strategy is used to control the injected current. There are various advantages of the proposed inverter they are the neutral of the grid is directly connected to the negative terminal of the PV panel, so the leakage current is eliminated, its compact size low cost the used dc voltage of the proposed inverter is the same as the full bridge inverter unlike neutral point clamped NPC , active NPC, and half bridge inverters flexible grounding configuration capability of reactive power flow and high efficiency. By using simulation result we can verify the concept of the proposed inverter and its practical application in grid tied PV systems. 

BY Anil Tekale | Radharaman Saha | Pratik Ghutke | Swapna God "Implementation of Fuzzy Based Grid-Tied PV System for Single Phase Transformer less Inverter with Charge Pump Circuit Concept"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23583.pdf

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/23583/implementation-of-fuzzy-based-grid-tied-pv-system-for-single-phase-transformer-less-inverter-with-charge-pump-circuit-concept/anil-tekale

call for paper international journal, call for paper, call for paper engineering

Automatic Light Turn On Off System

This project focus on a real time situation where we are wasting the electricity. Because of our carelessness the usage of current is increasing day by day. We are living in an era where so many peoples do not getting electricity properly. Electrical power is now the backbone of modern industrial society. Electricity is at the heart of many modern technologies, being used for electric power where electric current is used to energize equipment, electronics which deals with electrical circuits that involve active electrical components such as vacuum tubes, transistors, diodes and integrated circuits and associated passive interconnection technologies. In order to avoid the lack of electricity due to our carelessness we are implementing the new system that is known as AUTOMATIC TURN ON OFF SYSTEM. In this project, we are detecting the motion of a person or anything and turn off the electronic equipment's if there is no person. By this we can save the electricity. 

BY Snehal Jose | Sneha Haridas | Sivaprasad V B | Sonia Shaju "Automatic Light Turn On/Off System"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23495.pdf

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/23495/automatic-light-turn-onoff-system/snehal-jose

best international journal, call for paper international journal, call for paper