A Literature Survey on Security Management Policies used in Wireless Domain

Wireless is a term used to describe telecommunications in which electromagnetic waves rather than some form of wire carry the signal over part or the entire communication path. Some monitoring devices, such as intrusion alarms, employ acoustic waves at frequencies above the range of human hearing these are also sometimes classified as wireless. Wireless network security is the process of designing, implementing and ensuring security on a wireless computer network. Nowadays wireless networks are the most popular way of communication. For example, internet services in companies, cafes, e markets and in homes. This paper will highlight the drawbacks and their proposed system to give continuous growth of new technologies in wireless domain, both for application and basic research. Papers should emphasize original results relating to the theory and or applications of wireless communications and networking. 

BY K. Senthil Kumar | P. Supraja | V. Sridharshini "A Literature Survey on Security Management Policies used in Wireless Domain"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd22854.pdf

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/22854/a-literature-survey-on-security-management-policies-used-in-wireless-domain/k-senthil-kumar

call for paper, call for paper engineering, call for paper science

Implementation of Fuzzy Based Grid Tied PV System for Single Phase Transformer less Inverter with Charge Pump Circuit Concept

This paper proposes a implementation of a single phase transformer less photovoltaic inverter for grid connect PV system. We are developing new topology to eliminate the leakage current in which concept of charge pump circuit is introduced. In this paper, for controlling purpose we are utilizing Fuzzy Logic Controller. The neutral of the grid is directly connected to the negative polarity of the PV panel that creates a constant common mode voltage and zero leakage current. During the negative cycle, the charge pump circuit generates the negative output voltage of the proposed inverter. Therefore, according to the proportional resonant control strategy is used to control the injected current. There are various advantages of the proposed inverter they are the neutral of the grid is directly connected to the negative terminal of the PV panel, so the leakage current is eliminated, its compact size low cost the used dc voltage of the proposed inverter is the same as the full bridge inverter unlike neutral point clamped NPC , active NPC, and half bridge inverters flexible grounding configuration capability of reactive power flow and high efficiency. By using simulation result we can verify the concept of the proposed inverter and its practical application in grid tied PV systems. 

BY Anil Tekale | Radharaman Saha | Pratik Ghutke | Swapna God "Implementation of Fuzzy Based Grid-Tied PV System for Single Phase Transformer less Inverter with Charge Pump Circuit Concept"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23583.pdf

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/23583/implementation-of-fuzzy-based-grid-tied-pv-system-for-single-phase-transformer-less-inverter-with-charge-pump-circuit-concept/anil-tekale

call for paper international journal, call for paper, call for paper engineering

Automatic Light Turn On Off System

This project focus on a real time situation where we are wasting the electricity. Because of our carelessness the usage of current is increasing day by day. We are living in an era where so many peoples do not getting electricity properly. Electrical power is now the backbone of modern industrial society. Electricity is at the heart of many modern technologies, being used for electric power where electric current is used to energize equipment, electronics which deals with electrical circuits that involve active electrical components such as vacuum tubes, transistors, diodes and integrated circuits and associated passive interconnection technologies. In order to avoid the lack of electricity due to our carelessness we are implementing the new system that is known as AUTOMATIC TURN ON OFF SYSTEM. In this project, we are detecting the motion of a person or anything and turn off the electronic equipment's if there is no person. By this we can save the electricity. 

BY Snehal Jose | Sneha Haridas | Sivaprasad V B | Sonia Shaju "Automatic Light Turn On/Off System"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23495.pdf

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/23495/automatic-light-turn-onoff-system/snehal-jose

best international journal, call for paper international journal, call for paper

A Review of Sensor Node in Wireless Sensor Networks

Wireless Sensor Networks WSNs are collection of tiny sensor nodes capable of sensing, processing and broadcasting data correlated to some occurrence in the network area. The sensor nodes have severe limitation, such as bandwidth, short communication range, limited CPU processing facility, memory and energy. Enhancing the lifetime of wireless sensors network and efficient utilizations of bandwidth are essential for the proliferation of wireless sensor network in different applications. We provide an in depth study of applying wireless sensor networks WSNs to real world habitat monitoring. A set of system design requirements were developed that cover the hardware design of the nodes, the sensor network software, protective enclosures, and system architecture to meet the requirements of biologists. Although researchers anticipate some challenges arising in real world deployments of WSNs, many problems can only be discovered through experience. We present a set of experiences from a four month long deployment on a remote island. We analyze the environmental and node health data to evaluate system performance. The close integration of WSNs with their environment provides environmental data at densities previously impossible. We show that the sensor data is also useful for predicting system operation and network failures. Based on over one million data readings, we analyze the node and network design and develop network reliability profiles and failure models. 

BY Jobanputra Paresh Ashokkumar | Prof. Arun Jhapate "A Review of Sensor Node in Wireless Sensor Networks"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23620.pdf

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/23620/a-review-of-sensor-node-in-wireless-sensor-networks/jobanputra-paresh-ashokkumar

peer reviewed international journal, best international journal, call for paper international journal

Multi Objective Optimization of PMEDM Process Parameter by Topsis Method

In this study, MRR, SR, and HV in powder mixed electrical discharge machining PMEDM were multi criteria decision making MCDM by TOPSIS method. The process parameters used included work piece materials, electrode materials, electrode polarity, pulse on time, pulse off time, current, and titanium powder concentration. Some interaction pairs among the process parameters were also used to evaluate. The results showed that optimal process parameters, including ton = 20 µs, I= 6 A, tof = 57 µs, and 10 g l. The optimum characteristics were MRR = 38.79 mm3 min, SR = 2.71 m, and HV = 771.0 HV.

BY Nguyen Duc Luan | Nguyen Duc Minh | Le Thi Phuong Thanh "Multi-Objective Optimization of PMEDM Process Parameter by Topsis Method"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23169.pdf

Paper URL: https://www.ijtsrd.com/engineering/manufacturing-engineering/23169/multi-objective-optimization-of-pmedm-process-parameter-by-topsis-method/nguyen-duc-luan

international journal of science, peer reviewed international journal, best international journal

Additive Manufacturing of Leaf Spring

Additive manufacturing AM , colloquially known as 3 D printing, refers to set of emerging technological that offer unique capabilities However, this design freedom is countered by build envelope and production rate constraints characteristic of most commercially available AM equipment. This paper presents an approach for architecting complex additively manufactured products using the design structure matrix DSM , a methodology that can map out components and interfaces at the system level. By building and manipulating a DSM of a proof of concept product, various architectures are explored considering size and structural constraints of additively manufactured components.

BY K. Vinay Kumar Reddy | B. Bhaskar | Gautam Raj | G. Vinay Kumar "Additive Manufacturing of Leaf Spring"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23528.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23528/additive-manufacturing-of-leaf-spring/k-vinay-kumar-reddy

manuscript publication, paper publication for engineering, paper publication in science

Development and Optimization of Process Parameters of Microwaved Cured Polymer Based Natural Fibre Coir Reinforced Composite

Now a days the processing of natural Fibre reinforced polymer composite through microwave curing going on a fortunate steps for better properties. It has been observed that the application of NFRPC is increasing day to day. Due to their low cost and light weight that type of composite is applying at various light load capacity areas. Processing of NFRPC depends on a large no factors. Due to practical constraint 3 domen parameters were considered during experimental investigation. The value of the parameter were selected on the basis of material characteristics and experimental available in the Laboratory. Design of Experiment were used for planning the experiments. Optimum process parameter were determined for improvement ultimate tensile strength. The selection of optimum parameter was assured by mechanical testing as well as microscopic structure. Processing of composite by using optimized parameters resulted in improvement in tensile strength by 3 . The ANOVA table was prepared and table was shown Curing Time is one of the main crucial parameter which affects the composite processing. 

BY Shubham Singh | Jitendra Sharma | Ujjwaldeep | Krishna Gupta | Manabendra Saha "Development and Optimization of Process Parameters of Microwaved Cured Polymer Based Natural Fibre (Coir) Reinforced Composite"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23595.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23595/development-and-optimization-of-process-parameters-of-microwaved-cured-polymer-based-natural-fibre-coir-reinforced-composite/shubham-singh

international journal of management, international journal of science, peer reviewed international journal