Design and Analysis of Pedal Box with Braking System

A design process for an automotive pedal box system is presented in this paper. The work begins with a review of research carried out on pedal box system. It is followed by the process of designing a complete pedal box system. Reverse engineering process by using a steel pedal box system by use of MS Plate. The Pedal box design with proper pedal ratio and the use of single brake for both front and rear braking is designed.

BY Md. Hameed | B. Praveen Kumar | B. Rohit | B. Surya Sai | G. Sai Kiran "Design and Analysis of Pedal Box with Braking System"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23413.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23413/design-and-analysis-of-pedal-box-with-braking-system/md-hameed

list of ugc approved journals, ugc approved journals for engineering, ugc approved journals for chemistry

EEG Classification using Semi Supervised Learning

The major challenge in the current brain–computer interface research is the accurate classification of time varying electroencephalographic EEG signals. The labeled EEG samples are usually scarce, while the unlabeled samples are available in large quantities and easy to collect in real applications. Semi supervised learning SSL methods can utilize both labeled and unlabeled data to improve performance over supervised approaches. However, it has been reported that the unlabeled data may undermine the performance of SSL in some cases. This study proposes a three stages technique for automatic detection of epileptic seizure in EEG signals. In practical application of pattern recognition, there are often diverse features extracted from raw data which needs to be recognized. Proposed method is based on time series signal, spectral analysis and recurrent neural networks RNNs . Decision making was performed in three stages i feature extraction using Welch method power spectrum density estimation PSD ii dimensionality reduction using statistics over extracted features and time series signal samples iii EEG classification using recurrent neural networks. This study shows that Welch method power spectrum density estimation is an appropriate feature which well represents EEG signals. We achieved higher classification accuracy specificity, sensitivity, classification accuracy in comparison with other researches to classify EEG signals exactly 100 in this study. To improve the safety of SSL, we proposed a new safety control mechanism by analyzing the differences between unlabeled data analysis in supervised and semi supervised learning. We then develop and implement a safe classification method based on the semi supervised extreme learning machine SS ELM . Following this approach, the Wasserstein distance is used to measure the similarities between the predictions obtained from ELM and SS ELM algorithms, and a different risk degree is thereby calculated for each unlabeled data instance. A risk based regularization term is then constructed and embedded into the objective function of the SS ELM. Extensive experiments were conducted using benchmark and EEG datasets to evaluate the effectiveness of the proposed method. Experimental results show that the performance of the new algorithm is comparable to SS ELM and superior to ELM on average. It is thereby shown that the proposed method is safe and efficient for the classification of EEG signals. 

BY Shivshankar Kumar Yadav | Veena S. "EEG Classification using Semi Supervised Learning"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23355.pdf

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/23355/eeg-classification-using-semi-supervised-learning/shivshankar-kumar-yadav

ugc approved journal, list of ugc approved journals, ugc approved journals for engineering

All Terrain Offensive and Defensive Robot

Generally, various risky tasks or certain difficult operations cannot be done completely by humans and thus there is need for change in present era. As robots play vital roles in different fields of industries, medical, colleges, home appliances, military and defence, thus robots can be good and effective option for such difficult purposes. The proposed work is to develop an all terrain robot prototype. The robots which are presently in the market works on simple terrains while this project claims to make a prototype which can work on plain surfaces as well as rough surfaces such as forests, hilly and rocky areas. This project presents a offensive and defensive robot which uses different technologies like Arduino, Android Application, Bluetooth module and Laser Module. It develops a low voltage power supply, low cost and wireless robot prototype which is controlled using microcontroller and android application. 

BY Dr. M. Sampath Kumar | Anchal Mohanty | Meghana Beesu | E. Sai Kiran "All Terrain Offensive and Defensive Robot"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23370.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23370/all-terrain-offensive-and-defensive-robot/dr-m-sampath-kumar

ugc approved journals with low publication fees, ugc approved journal, list of ugc approved journals

IOT Based Smart Cities

Since the development of advanced metering and digital technology, Smart City has been equipped based on things IOT in different electronic devices, and therefore smarter than before. The purpose of this paper is to carry out the concept of smart cities and their motivation and application of a comprehensive review. In addition, the survey describes the intelligent networking technology and smart cities and major components of urban functions. This also explains the major challenges and experiences around the world. 

BY Mukesh Kumawat | Mr. Durgesh Kumar | Dr. Garima Mathur "IOT Based Smart Cities"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23246.pdf

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23246/iot-based-smart-cities/mukesh-kumawat

ugc listed journals, ugc approved journals with low publication fees, ugc approved journal

Removal of Pb II from Aqueous Solutions using Activated Carbon Prepared from Garlic Waste

The recent study explains about the removal of Pb II ions from aqueous solution using activated carbon prepared from Garlic waste. Garlic peels have been used for the production of Carbon by treating with conc.H2SO4 for metal ions removal. Fourier Transform Infrared Spectroscopy and Boehm titration have been used for various physicochemical characterization of the outcome of activated carbon which proclaimed the presence of oxygen containing surface functional groups like phenolic, lactonic and carboxylic in the carbons. In a batch adsorption process the effect of pH and initial metal ion concentration was calculated. The optimum pH for lead adsorption is found to be equal to 6.The resultant activated carbon showed maximum adsorption capacity of Pb II was 210 mg g 1. The waste material which is used in this work is cost effective and easily available for the production of activated carbon. Hence the removal of Pb II from water using the carbons prepared from Garlic peels can act as possible low cost adsorbents for the removal of Pb II from water. 

BY R. Mary Nancy Flora | Ashok | Ramanathan "Removal of Pb (II) from Aqueous Solutions using Activated Carbon Prepared from Garlic Waste"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23365.pdf

Paper URL: https://www.ijtsrd.com/engineering/chemical-engineering/23365/removal-of-pb-ii-from-aqueous-solutions-using-activated-carbon-prepared-from-garlic-waste/r-mary-nancy-flora

ugc approved journals, ugc journal list, ugc list of journals

Design of Solar Powered Air Conditioning System

The demand of air conditioning is increasing due to the effect of climate change and global warming. If we still rely on the conventional electric air conditioning it will be harmful in future because electricity is generated from fossil fuels, the greenhouse gas emission would continuously worsen global warming, in turn the demand of air conditioning would be further increasing. Also the rate of electricity is increased by 6 which will goes on increasing in future. The solar powered air conditioners which are available in market are direct current air conditioners, we are designing a system for running a current air conditioner on solar which runs on alternate current. So in order to reduce the global warming and the green house gas emission effect we should adopt the natural way for the generation of electricity which in turn reduces the cost of electricity by conventional way. As the temperature of the earth is increasing day by day, the need of cooling is also increasing. But the bitter truth is that the temperature of earth is always goes on increasing. So in future there should be the need of centralized air conditioning. And as temperature increases we will get more amount of solar energy. 

BY Saraf Akshay Avinash "Design of Solar Powered Air Conditioning System"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23347.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23347/design-of-solar-powered-air-conditioning-system/saraf-akshay-avinash

call for paper papers conference, call for paper in ugc approved journals, ugc approved journals

Chemical Safety in Textile Industry

Material industry in India contributes a considerable measure to the development of Indian economy and assumes a vital part in giving the work to the rustic and urban populace in India however it neglects to cultivate instruction and wellbeing as key segment of human advancement. There are distinctive risks looked by the laborers in material industry, for example, introduction to cotton dust, presentation to synthetic substances, commotion and ergonomics issues and so on. There are likewise a few variables, which are dependable to make the perils in the workplace I.e. work stressed, ill advised utilization of individual defensive hardware stretch, unfortunate workplace and poor working conditions and so on. The majority of the specialists are unskilled and dont have the foggiest idea about that what defensive measures ought to be embraced for their occupations. To keep the medical problems of specialists in ventures it is basic that the laborers know about the different word related risks in the business. It is additionally fundamental that the administration should find a way to shield specialists from potential dangerous circumstance. The wide utilization of synthetic concoctions in material generation is basic learning, while next to no has been done to unveil the possibly destructive mixes stowing away in our storage room. 

BY Ligori Aruldass. T | Arun Karthik. V. M "Chemical Safety in Textile Industry"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23135.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23135/chemical-safety-in-textile-industry/ligori-aruldass-t

call for paper papers in journals, call for paper papers conference, call for paper in ugc approved journals