Automatic Plant Irrigation System

Agriculture is the source of living of majority Indians and it also has a countless influence on economy of the country. The objective of our project is to reduce this manual involvement by the farmer by using an automated irrigation system which purpose is to enhance water use for agricultural crops . This paper deals with automatic irrigation system senses the moisture content of the soil and automatically switches the pump when the power is on. In this project an automation of farm irrigation and soil moisture control by Arduino using soil moisture sensor and L293D module. This automatic irrigation system senses the moisture content of the soil and automatically switches the pump when the power is on. 

by Md. Sajid Abbas | Md. Aswer Mohiddin | N. Y. S. Pavan Teja | Ch. Nanda Kumar "Automatic Plant Irrigation System"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23222.pdf

Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/23222/automatic-plant-irrigation-system/md-sajid-abbas

paper publication in science, paper publication in management, best journal

Estimation of Cooling Load Calculations for a Commercial Complex

In this project we discussed the cooling load calculations for a commercial building by using revit software Window air conditioners, split air conditioners are used in small buildings and offices etc but in big buildings and commercial complex we use central air conditioning systems this systems are installed far away from the buildings. The cooled air is supplied to the building with the help of ducts. When ducts are not properly designed, then it will lead to problem such as frictional loss, higher installation cost, increased noise and power consumption. For minimizing this problem, a proper design of duct is needed. Equal friction method is used to design the duct it gives the comparison of pressure drop in rectangular duct and circular duct. Central air conditioning is more reliable for easy operation with a lower maintenance cost. Cooling load items such as, people heat gain, lighting heat gain, infiltration and ventilation heat gain can easily by using REVIT SOFTWARE. The programme can also be used to calculate cooling load due to walls and roofs. And results were compared with the standard data given by ASHRAE and CARRIER. The RULE OF THUMB method is used to calculate the heat developed in the rooms. These methods are used for lower power consumption capital cost and improve aesthetics of building 

by I. S. N. V. R. Prashanth | V. Nikitha | B. Aravind | N. Mahesh "Estimation of Cooling Load Calculations for a Commercial Complex"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23322.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23322/estimation-of-cooling-load-calculations-for-a-commercial-complex/i-s-n-v-r-prashanth

manuscript publication, paper publication for engineering, paper publication in science

Air Water System Design using Revit Mep for a Residential Building

In this project we discussed the study and performance of air conditioner, air refrigeration and water conditioner system in a single unit. The main objective of this project is to develop the multifunctional system which can provide refrigeration effect, cold water and air conditioning effect with in regular air or space conditioning system. Air and water systems conditioning spaces by distributing the both conditioned air and water to the terminal units installed in the spaces for which the basic plan is given by civil department and the basic design is done by using REVIT MEP software. The air and water are heated or cooled in a central mechanical equipment room. The air supplied is termed as primary air to distinguish it from the recirculated or secondary room air. By using the peak cooling load values obtained in the heating and cooling load calculations the ton of refrigeration values for individual and total area is calculated which will be helpful for selection of accurate design for the residential building.

By B. Shushma | M. Uday Bhaskar | N. Balaji | G. Srujan Yadav "Air-Water System Design using Revit Mep for a Residential Building"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23314.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23314/air-water-system-design-using-revit-mep-for-a-residential-building/b-shushma

international peer reviewed journal, high impact factor, manuscript publication

Dynamic Analysis of Bionic ARM

In this day and age there is an expanding need to make artificial arms for various cruel circumstances where human communication is troublesome or incomprehensible. They may include taking readings from a dynamic spring of gushing lava to diffusing a bomb. This paper presents a study on dynamic analysis of multi degree freedom of a bionic arm that is designed in CATIA V5. The prototype is converted into standard for the exchange of product .stp file and is imported in the ANSYS software for the calculation of parameters such as maximum and minimum of deformations, stresses, strains, velocities, and acceleration. The analysis is done with giving different materials for the better optimization of the parameters such as reduced weight, less friction, and more strength. The fingers are revolute pairs that are free to rotate about certain degrees this motion is given by actuators. The arm can be improvised by using sensors, actuators and mechatronic chips so that it mimics the artificial hand.

Mr. M. Sreedhar | Mrs. P. Varalakshmi | R. Naveen | S. Bharath Kumar | T. Akhil Reddy "Dynamic Analysis of Bionic ARM"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23237.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23237/dynamic-analysis-of-bionic-arm/mr-m-sreedhar

open access journal of management, indexed journal, paper publication

Design and Developing of Two Wheeler Handle Gripper Using 3D Printing Technology

This paper provides information about design and developing of two wheeler handle gripper using the 3D printing. This technology allows to build a part in such a wat that thermoplastic material through nozzle deposited layer by layer and manufacture with high degree of freedom unachievable with the traditional manufacturing method. These two wheeler handle grippers TWHG play important role in providing grip to driver during vehicle running and idle conditions, it is difficult to make firm grip between hand and handle without handle gripper on two wheeler handle. For this paper purpose handle gripper model is created in CATIA V5, it is fully three dimensional modelling software, by using this model of handle grippers 3D printed handle grippers are created by the method of fused deposition process of rapid prototyping technology.

By S. Suresh | Duppelly Vamshi | Boda Rahul | Dharavath Ashok Kumar "Design and Developing of Two-Wheeler Handle Gripper Using 3D Printing Technology"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23311.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23311/design-and-developing-of-two-wheeler-handle-gripper-using-3d-printing-technology/s-suresh

open access journal of engineering, open access journal of management, indexed journal

Multiple Products Testing on Single Circular Conveyor

This paper proposes to solve the problem occurring at the time of segregation of products which are manufactured in the industry. There are several industries that produces multiple products which have different attributes, because of the presence of multiple products each type of product requires a different setup for its inspection and this causes more space requirement which leads to more capital investment. Therefore to eradicate this problem of different setups and space requirement we have developed the system which deals with multiple product testing on single circular conveyor which reduces the space tremendously.

By Neeraj Kumar Sharma | Apoorv Sharma | Aayushi Pandey | Chandrakant Jaiswal | Akarsh Gupta "Multiple Products Testing on Single Circular Conveyor"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23240.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23240/multiple-products-testing-on-single-circular-conveyor/neeraj-kumar-sharma

biological science journal, mathematics journal, physics journal

RFID and GSM Based Safe Petrol Distribution System with Adulteration Prevention

Detection of fuel adulteration in real time is the most important need of the world as it generates the hazardous effects on the environment, living and nonliving things. Various automotive users and fuel providers may mix kerosene in petrol and diesel. Adulterated fuel increases air pollution, as well as reduces the performance of vehicle engines. Such a malpractice needs to be stopped, in order to that we have proposed a system to detect adulteration using LDR sensor, which will be later reported to the Fuel Manufacturing Company. We also focused on automating the process of ordering the fuel using GSM technology. Also our system provide safe transportation of fuel with accurate distribution as per fuel requirements of various pump using RFID technology

By Prof. Harsha Sarode | Sahil Mattoo | Supda Kate | Santosh Satam "RFID and GSM Based Safe Petrol Distribution System with Adulteration Prevention"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23129.pdf

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23129/rfid-and-gsm-based-safe-petrol-distribution-system-with-adulteration-prevention/prof-harsha-sarode

ugc approved engineerig journal, journal publications, engineering journal