Saturday, September 15, 2018

Performance Improvement of QCA Design XOR Logic Gate using Bistable Simulation Engine Vector

Among the emerging technologies recently proposed as alternatives to the CMOS technology, the quantum-dot cellular automata is one of the promising solutions to design very high speed and ultralow power digital circuits. In this paper we used QCA Designer simulator tool for simulation of the proposed XOR design. The QCA Designer tools used to simulate the circuits and calculate the area as well as number of cells. 

BY Haritika Satle | Aastha Hajari "Performance Improvement of QCA Design XOR Logic Gate using Bistable Simulation Engine Vector" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-6 , October 2018, 

URL: http://www.ijtsrd.com/papers/ijtsrd18824.pdf

Direct Link: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/18824/performance-improvement-of-qca-design-xor-logic-gate-using-bistable-simulation-engine-vector/haritika-satle

peer reviewed journals, manuscript submission, call for paper engineering

The Production of Instant Powder Fermented Soy Food Supplement Enriched with Rice Bran

Fermented soy bean or tempe has been documented as source of vegetable protein and consumed mainly by most Indonesian people living in Java Island. However due to having short storage life and also lack of vitamin and mineral become the main hindrance to develop the utilization of this product. The processing of fermented soy bean into probiotic powder supplement enriched with rice bran has been searched. Three stages of experiments were carried out. The first stage was to find out the effect of fermentation time on the characteristic and total microbial load of fermented soy bean. 

A single factor with six levels 4, 6, 8, 10, 12 and 14 hours with four replications were used to carry out this study. The second stage of experiment was to find out the effect of temperature and emulsifier concentration on the characteristic and storage life of the fermented powder food supplement. A randomize block design was used to carried out this study. 

The temperature at three levels 50, 55 and 60ºC as the first factor and emulsifier tween 80 concentration at two levels 0.3 and 0.4 w w as the second factor, all the treatments were repeated three times. Result from the first stage shown that the fermentation time of 12 hours has the highest total microbial load of 0.8x108 cells ml while the protein content was 2.894 w w, fat content 1.2209 w w, pH 3.6 and the ash content of 0.57 w w. 

Result from the second stage shown that the temperature of 500C and tween 80 at a concentration level of 0.3 w w, has total microbe of 0.24x108 cells ml and 282.67 mg 100 g isoflavone. The powder enriched with rice bran has a significant role to increase the body weight of rats. After 15 days of feeding the rats body weight increased about 30 w w.

By Sri Kumalaningsih "The Production of Instant Powder Fermented Soy Food Supplement Enriched with Rice Bran" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-6 , October 2018, 

URL: http://www.ijtsrd.com/papers/ijtsrd18722.pdf

Direct Link: http://www.ijtsrd.com/engineering/agricultural-engineering/18722/the-production-of-instant-powder-fermented-soy-food-supplement-enriched-with-rice-bran/sri-kumalaningsih

peer reviewed journals, manuscript submission, call for paper engineering

Investigation on Mechanical Properties of AL6061 Alloy Processed by FSW

The aim of this experiment was to improve the mechanical properties of 6061 aluminium alloys by friction stir processing FSP , a solid-state technique for micro structural modification using the heat from a friction and stirring. The Aluminium alloy 6061 is widely used in the fabrication of lightweight structures with high strength-to-weight ratio and good corrosion resistance. Welding is main fabrication method of 6061 alloy for manufacturing various engineering components. Friction stir welding FSW is a recently developed solid state welding process to overcome the problems encountered in fusion welding. 

This process uses a non-consumable tool to generate frictional heat on the abutting surfaces. The welding parameters, such as tool pin profile, rotational speed, welding speed and axial force, play major role in determining the micro structure and corrosion resistance of welded joint. In this work a central composite design with two different speeds, traverse speeds and Four tools has been used to minimize the experimental conditions.

BY B. S. Bharadwaj | N. Phani Raja Rao "Investigation on Mechanical Properties of AL6061 Alloy Processed by FSW" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-6 , October 2018, 

URL: http://www.ijtsrd.com/papers/ijtsrd18802.pdf

Direct Link: http://www.ijtsrd.com/engineering/mechanical-engineering/18802/investigation-on-mechanical-properties-of-al6061-alloy-processed-by-fsw/b-s-bharadwaj

peer reviewed journals, manuscript submission, call for paper engineering

A Survey Paper on Car Parking Reservation System for Parking Slots using Android Application

These days with the fast increment in urban populace, there is a noteworthy issue with the parking framework in relatively every real city over the globe. Numerous of us get exceedingly exasperates hen there is no appropriate space for parking spot for our vehicles. In this article, we have proposed a brilliant parking application, where clients will be ready to stop their cars by finding a void parking garage through Android Application or can even stop their autos specifically through Embedded Hardware. An Intelligent Parking System is executed in light of Opening Allotment. 

There are two modes utilizing which the Android client can book the stopping openings effortlessly like Advance and Current Booking. Utilizing these modes the application client can likewise pick the most effortless and closest course and goal. The Android Application itself will fill in as an payment portal. Implanted Hardware is actualized for Direct Parking. Server will screen the Space Allotment powerfully. 

By Mr. Raghuveer Raibagi | Mr. Vivek Khubchandani | Mr. Aniket Ahuja | Mr. Kantesh Pidwani | Mr. Sagar V. Chavan "A Survey Paper on Car Parking Reservation System for Parking Slots using Android Application"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-6 , October 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd18823.pdf

Direct Link: http://www.ijtsrd.com/engineering/computer-engineering/18823/a-survey-paper-on-car-parking-reservation-system-for-parking-slots-using-android-application/mr-raghuveer-raibagi

multidisciplinary journal, submit paper online, indexed journal

Crack and Object Detection in Pipeline using Inspection Robot

Pipelines are important means of transportation of gas, water, fuel oils, etc. in various fields. The transportation loss occurs due to aging, corrosion, obstacles, crack and mechanical faults in the pipeline. The lifetime of pipeline can be increased by regular inspection of pipeline and recognizing the cracks, damages and faults in the pipeline and ensuring proper maintenance of faults. This helps in preventing transportation loss and maintaining profitable gross. Thus, this paper aims to propose an autonomous robot used for in-pipe inspection which provides easy way of detecting crack and obstacle inside the pipe. 

The mechanical model of the pipe inspection robot was design according to the requirements of physical size of the pipe. The basic design of inspection robot consists of robot body and DC motors with the rating of 9V and 35 rpm are attached to the wheels to move the robot forward and backward. The electronic circuit is developed, consisting of an H Bridge and Arduino Uno which in turn controls the entire connection of DC motors and sensors. The robot allows for detection of cracks and obstacles inside the pipe and also allows us to communicate with it through serial communication.

By Hemavathi. R | Pushpalatha B A "Crack and Object Detection in Pipeline using Inspection Robot" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-6 , October 2018, 

URL: http://www.ijtsrd.com/papers/ijtsrd18781.pdf

Direct Link: http://www.ijtsrd.com/engineering/electrical-engineering/18781/crack-and-object-detection-in-pipeline-using-inspection-robot/hemavathi-r

research publication, ugc approved journals for engineering, special issue publication

Automated Biometric-EVM Implemented Using Lab-View

Election commission still uses manual system during election for vote casting in this modern age of digitalization. In parliamentary elections it is consider introducing Electronic voting machines EVM though Evm is not entirely automated and has many limitations. Integrated database system containing all voters' information and a convenient user interface of an automated biometric voting system had designed, in this work. Automatically casted votes will be counted simultaneously of the voting process and result will be displayed. Using Lab VIEW enables the data base storage and file management process to easy to build and applicable in all other fields compare to other methods.

Lab VIEW is mainly for data acquisition, data base storage, extraction of the data from data base and displaying it and also for report generation to store election voting information in files for future purpose. Main advantage of this project is not using internet connection for database extraction and storing purpose. 

This paper presents 2nd stage of verification by proving Aadhar information of the voter extracted by the use of fingerprints and that going to display on screen. The Aadhar information can be monitored. In future IOT can be implemented to send election report etc. Therefore, voting management of the election commission will be improved by ceasing fraudulent activities, corruptions, ensuring security, transparency, fairness, accuracy, trustworthy and keeping backup trails of voting system can be seen in this paper. 

By Hemavathi. R | Roopa A E "Automated Biometric-EVM Implemented Using Lab-View" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-6 , October 2018, 

URL: http://www.ijtsrd.com/papers/ijtsrd18782.pdf

Direct Link: http://www.ijtsrd.com/engineering/electrical-engineering/18782/automated-biometric-evm-implemented-using-lab-view/hemavathi-r

paper publication for student, paper publication for engineering, conference issue publication

Wednesday, September 5, 2018

Soil Classification Using Image Processing and Modified SVM Classifier

Recently the use of soil classification has gained more and more importance and recent direction in research works indicates that image classification of images for soil information is the preferred choice. Various methods for image classification have been developed based on different theories or models. In this study, three of these methods Maximum Likelihood classification MLC , Sub pixel classification SP and Support Vector machine SVM are used to classify a soil image into seven soil classes and the results compared. MLC and SVM are hard classification methods but SP is a soft classification. 

Hardening of soft classifications for accuracy determination leads to loss of information and the accuracy may not necessary represent the strength of class membership. Therefore, in the comparison of the methods, the top 20 compositions per soil class of the SP were used instead. Results from the classification, indicated that output from SP was generally poor although it performs well with soils such as forest that are homogeneous in character. Of the two hard classifiers, SVM gave a better output than MLC.

By Priyanka Dewangan | Vaibhav Dedhe "Soil Classification Using Image Processing and Modified SVM Classifier" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-6 , October 2018, 

URL: http://www.ijtsrd.com/papers/ijtsrd18489.pdf

Direct Link: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/18489/soil-classification-using-image-processing-and-modified-svm-classifier/priyanka-dewangan

paper publication for student, paper publication for engineering, conference issue publication