Optimization of Trimming and Piercing Operations by Introducing a New Tool

To survive in business with profit in between crises and competition, we need to increase cost of the product. Unfortunately that is not an option to survive in business with great profit due to competition. The main option is to reduce the manufacturing cost with same quality. In this situation we have to look upon the process planning. From this I have concluded that combining two process into one could achieve what we want that is reducing process into lean, it reflect in cost. 

The various stage tools are TRIMMING and PIERCING operation is done by using in two mechanical presses at individual operator, the production efficiency is less & Tool cost is high. For this problem, I am planning to do new design of Combination tool. By designing of combination tool, following will be achieved to reduce the production cost which is our main Aim. 1) Setup time will be reduced 2) Cycle time will be reduced 3) One Man power will be eliminated 4) One Press Machine will be eliminated 5) Tooling cost will be reduced 6) Overall Operating cost & cost per component will be reduced. 

This project focusing on Stage reduction by new combination Tool design & Tool manufacturing for the Trimming and Piercing tool operation .This Tool will be called as TRIM &PIERCING TOOL. The product is Automobile BRAKE BACK PLATE for the customer of FORD Automotive. 

By Benin S. R | A. Jacob Moses | Renjin J Bright"Optimization of Trimming and Piercing Operations by Introducing a New Tool"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd12849.pdf 

Direct URL: http://www.ijtsrd.com/engineering/mechanical-engineering/12849/optimization-of-trimming-and-piercing-operations-by-introducing-a-new-tool/benin-s-r

research publication, ugc approved journals for engineering, special issue publication

Lung Cancer Detection on CT Images by using Image Processing

This project is mainly based on image processing technique. In this work MATLAB have been used through every procedure made. Image processing techniques are widely use in bio-medical sector. The objective of our work is noise removal operation, thresholding, gray scale imaging, histogram equalization, texture segmentation, and morphological operation. Detection of lung cancer from computed tomography (CT) images is done by using MATLAB software. By using these methods the work has been done on CT images and the final tumor area has been shown with pixel values. 

By Bindiya Patel | Dr. Pankaj Kumar Mishra | Prof. Amit Kolhe"Lung Cancer Detection on CT Images by using Image Processing"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11674.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/11674/lung-cancer-detection-on-ct-images-by-using-image-processing/bindiya-patel

paper publication for student, paper publication for engineering, conference issue publication

Analysis of Trust-Based Recommendation for Recommendation Model in Data Mining

As an essential strategy for Data Filtering, the recommender structures have been pulled in and made a huge amount of eagerness as far back as ten years. The past suggestion procedures and philosophies have been extensively analyzed in the information recuperation investigate gatherings, machine learning frameworks and data mining. Because of their marvelous business ask for, the suggestion structures have been adequately worked out in present day circumstances and in business zones, for instance, proposition of the thing at Amazon, proposal of music at iTunes, proposition of movies at Netflix, and whatnot. Here, we are proposing an approach called TrustSVD, which is a trust-based cross section factorization framework for thing or organization suggestions. 

This TrustSVD arranges various distinctive information sources into the proposal structure to diminish the data sparsity and the chilly begin starts issues and their degradation execution. An essential examination of social trust data from the few of genuine educational records tells that, the unequivocal and certain effect of the two assessments and trust must be considered for a proposition illustrate. Accordingly TrustSVD develops the best in class recommender strategy known as, SVD++ (which has usage of effect of certain and express assessed things), by additionally combining both effect of trusted and confiding in customers upon the conjecture of the things for a dynamic customer. In perspective of our canny learning of recommender systems, the proposed technique is the first to upgrade SVD++ with the social put stock in information. 

By N. Sreenivasulu | R. Vijaya"Analysis of Trust-Based Recommendation for Recommendation Model in Data Mining"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd12809.pdf 

Direct URL: http://www.ijtsrd.com/engineering/computer-engineering/12809/analysis-of-trust-based-recommendation-for-recommendation-model-in-data-mining/n-sreenivasulu

peer reviewed journal, manuscript submission, call for paper engineering

Adhesive from Petrol and Thermocol

In today's life the generation of plastic waste has become the serious issue. It causes serious health and ecological problems like breeding of mosquito's and if eaten by cattle and wild animals endangers their lives too, also it stops vegetation from growing and obstructs in drain and piping, etc. The consumption of plastic has reached to 100 million tons, and this has caused increase in depletion of natural resources such as petroleum and natural gas etc. 

About 13 percent of the municipal solid waste is caused by plastic. 32 million tons of plastic waste was deposited in 2011, which is 12.7 percent of total MSW. Annually approximately 500 billion plastic bags are used worldwide every year. More than 1 million bags are used every minute. The main aim of this project is to make useful product from waste thermocol i.e. adhesive. 

By Kaushal Harsola | Gautam Shelar | Manjusha Donde | Faisal Shaikh"Adhesive from Petrol and Thermocol"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd12760.pdf 

Direct URL: http://www.ijtsrd.com/engineering/civil-engineering/12760/adhesive-from-petrol-and-thermocol/kaushal-harsola

paper publication, submit paper online, indexed journal

To Design a Circuit Diagram for Mute Keypad Vocalizer using ARDUINO UNO

Mute input device Vocalizer could be a massive scale microcontroller based mostly system being designed to facilitate the communication among the dumb and deaf individuals by manufacturing a speech and text signal. This system can be dynamically reconstructed to work as a 'œsmart device'. In this paper, microcontroller and sensors based mute keypad vocalizer is presented. Mute keypad vocalizer discussed is basically a speaker and a keypad equipped microcontroller based system. Keypad sensor can detect the pressing of keys and microcontroller based system converts some specified key values into speech signals. 

The vocalizer is equipped with a keypad module and an audio processing unit. This system is beneficial for dumb and deaf people. 

By Aditi Pandey | Bharti Dewangan | Deepak Pancholi"To Design a Circuit Diagram for Mute Keypad Vocalizer using ARDUINO UNO"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11688.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/11688/to-design-a-circuit-diagram-for-mute-keypad-vocalizer-using-arduino-uno/aditi-pandey

open access journal of engineering, ugc approved journals for engineering, special issue publication

Hot Disk Pick and Place Robot

The Project is aimed to provide an automation in handling of different type of hot discs prior to forming operation. In Present situation, hot discs (approx. at 750-°c) are guided to operator by conveyor from the furnace. Operator pics the disc with the help of tounge and places it on forming setup. The process is slightly time consuming, due to that the temperature of disc decreases and that results in decrease in forming quality. In addition to that, as the weight of disc is quite high (22 to 35kg/disc),the process was taking large amount of human efforts. 

To address all these issues, the team decided to Design a pick and place type robot in the work area. The main objective of our project is to provide a pick and place robot which will handle all 12 types of discs with one End effector and also it must take minimum time to move the hot disc from conveyor to the forming setup to save time and increase productivity. 

By Rizwaan Areef Shaikh | Ajinkya Ramesh Vadaje | Tejaswi Uttam Zagade"Hot Disk Pick and Place Robot"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd12758.pdf 

Direct URL: http://www.ijtsrd.com/engineering/mechanical-engineering/12758/hot-disk-pick-and-place-robot/rizwaan-areef-shaikh

international journals in engineering, paper publication for engineering, conference issue publication

Autonomous Voice Control Pick and Place Rover

This project is to control the Robot for Application through the voice operated. This project is used to pick and place the objects by Robot Controller Application in the remote areas. Battery energy is used to give the power to robot because now a day's power demand is increased due to this power failure happen many times. We are using the voice control system to control the rover motion. This is achieved by using the Bluetooth module HC-05 which creates a Bluetooth shield. 

Android application-(ARM apk) is created to encrypt the voice command into the pulse signal which will send the signal through the Bluetooth. HC-05 receives the encrypted electrical signal and processes this signal into suitable command to run rover. Here we are using the PIC 16ff 40 pin developer board as a controller which process the signal and control the motor. LCD display is used to display what the command is given, we are using 9 command to control the rover which are pointed in the program. 

By J. Antony Dujartin | B. Vinoth Kumar | K. Kamala Kanan | E. Mukesh | Mr. P. Devendran"Autonomous Voice Control Pick and Place Rover"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd12777.pdf 

Direct URL: http://www.ijtsrd.com/engineering/mechanical-engineering/12777/autonomous-voice-control-pick-and-place-rover/j-antony-dujartin

review papers, ugc approved journals for engineering, special issue publication