A Review of design of Binary Golay Code and Extended Binary Golay Code for error correction

A binary Golay code is a type of linear error-correcting code used in digital communications. The two binary Golay codes formats are the Binary Golay Code (23-bit, G23) and Extended Binary Golay code (24-bit, G24). The Golay code encodes 12-bits of data in such a way that it can correct 3-bits of error and detect 7-bits of error. G24 code is also called the Perfect Binary Golay Code. In standard code notation the codes have parameters [24, 12, 8] and [23, 12, 7], corresponding to the length of the codeword, the dimension of the code, and the minimum hamming distance between two codeword. 

An efficient implementation in the area of FPGA by using both Golay code (G23) and extended Golay code G(24) can be done by the help of different approaches of the encoding algorithm realizations. High speed with low-latency and less complexity in the design is the major concern at the time of working on FPGA. This paper presents a review on the various works performed by scholars on the design and implementation of Golay Code (G23 and G24). 

By Mayanka Rai | Hema Singh"A Review of design of Binary Golay Code and Extended Binary Golay Code for error correction"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11426.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/11426/a-review-of-design-of-binary-golay-code-and-extended-binary-golay-code-for-error-correction/mayanka-rai

manuscript publication, submit paper online, indexed journal

Bionic Person for Issuing of RTO License

This paper presents a novel approach for the computerization of driving license test system. In existing automated track has been implemented which includes in a driving test a candidate applying for license have to drive over all closed loop path in front of the authorities. He / She should be able to drive over the path without any support by resting his / her foot on the vehicle or land surface. If the candidate fails to do, he / she will be disqualified. The authorities will be watching the candidate manually. In proposed system, No authorities are needed for checking the candidates .

Various sensors has been utilized for watching the candidate fails to their foot in the vehicle by differential output from the sensor can be monitored .The sensors installed are Load Sensor for checking the rest of foot on the vehicle or land surface .Smoke Sensor for checking the amount of smoke released while the accelerator raised. Grip Sensor for maintaining the gear speed. 

Gyroscope (Accelerometer Sensor) for checking whether the candidate drives the vehicle in correct direction or not. So, Bribes could not be encouraged for issuing the license and no illegal action will be involved. We can get RTO license easily without any problem. 

By R. Preethi | P. Rajeshwari | R. Ananthi"Bionic Person for Issuing of RTO License"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11438.pdf 

Direct URL: http://www.ijtsrd.com/engineering/computer-engineering/11438/bionic-person-for-issuing-of-rto-license/r-preethi

manuscript publication, submit paper online, indexed journal

Bagasse Level Monitoring System

As industrial revolution approaching towards automa-tion they need to upgrade their manufacturing process. We were visited to Siddhanath sugar factory, in boiler section, we found a problem with bagasse silo that it doesn't indicate how much bagasse is in silo. Hence the workers don't know how much amount bagasse in the silo? In all sugar industries the cane after processing is left with the waste product called 'œBagasse'. The Bagasse produced in the mills is used as a fuel to boilers and the generation of steam. 

The steam thus produced is expanded in turbines and the power is generated. As the bagasse used for boiler to heat up and it is as per their requirement the bagasse will be used. They are used glass on middle of silo to know the amount of bagasse. But it requires a human being to observe it. Hence to reduce the human errors, we are making a system which will show amount of bagasse in silo. 

By Mr. Akhilesh Raut | Mr. Mahesh Mali | Miss. Trupti Mashale | Prof. Kazi K. S"Bagasse Level Monitoring System"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11469.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/11469/bagasse-level-monitoring-system/mr-akhilesh-raut

high impact factor, ugc approved journals for engineering, special issue publication

The Intellectual Automated Substation

The article is devoted to the study and introduction of modern technologies in electro-technical branch of the industry for the purpose of increasing reliability of electric supply. Appling the latest technical developments marketed in automatic breakers Compact NS and Master pact of the company "Schneider Electric", for modernization distributing device 0,4 kV applied transformer substation is offered in it. 

By Zhalilov Rashid"The Intellectual Automated Substation"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11597.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/11597/the-intellectual-automated-substation/zhalilov-rashid

international peer reviewed journal, paper publication for engineering, conference issue publication

Sequence Prediction of Firing Angle Bldc Motor Drive using Lookup Table

Brushless DC motors are also called electric switching motors. This is because the switching process is entirely done by electronic control and not mechanically. Typical brushless DC motors use a permanent magnet rotating in the rotor and a fixed electric magnet / coil on the motor housing for the stator. However, sometimes the motor housing may be the permanent magnet rotor and surround the electrical winding in the stator. This type of engine configuration is called an output engine, unlike the previous configuration which is a runner. 

The configuration of the output wheel allows a higher torque while the freewheel has higher rotational capacities. A lookup table for voltage selection has been designed to provide a faster torque response. Steering control and speed control also developed. 

By Murugesan. D | Karthikeyan. M | Loganathan. M"Sequence Prediction of Firing Angle Bldc Motor Drive using Lookup Table"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11514.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/11514/sequence-prediction-of-firing-angle-bldc-motor-drive-using-lookup-table/murugesan-d

peer reviewed journals, manuscript submission, call for paper engineering

Scaring Animals using Assembler Language

Human-Wild animal conflict is the major problem in the forest borders with large wild animal herds. Human conflicts with wild animals often occur, along with the narrowing of the wild animal habitat due to industrial and residential interests. The negative impacts of human wild animal conflict is on a large scale slaughter of wild animals. This problem which leads to crop damage, human death and injuries caused by wild animals, and wild animals being killed by humans. Wild animal Intrusion has been on the rise in the forest border areas with herds of wild animals straying into human habitation and creating a great loss to their properties. 

The surveillance and tracking of wild animals are difficult due to their size and nature of movement. Prevention system for indications of human wild animal conflict is absolutely necessary. So an intelligent electronics system is necessary which can be affixed to avoid the human-wild animal conflicts. In this paper, an automated system to detect the intrusion of wild animals into the human habitat in forest borders is proposed. 

Basic idea behind this work is to generate the sound signal which can be inaudible to human and irritating for wild animal. Such instrument can be mounted on forest borders so that wild animal herds will go back into the forest. The proposed is very efficient with good computation power and low cost. 

Pavithra. M. H | Nivetha. R | Haritha. M | Sandra Karunya | Madhan Gopi"Scaring Animals using Assembler Language"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11446.pdf 

Direct URL: http://www.ijtsrd.com/engineering/computer-engineering/11446/scaring-animals-using-assembler-language/pavithra-m-h

international journals in engineering, paper publication for engineering, conference issue publication

Simulation and Analysis of Variable Speed Wind Turbine Coupled With Self-Excited Induction Generator

This paper presents the analysis of a wind driven Self-excited induction generator [SEIG] is connected to the resistive load. The power flow analysis is carried out for different wind velocities. The proposed scheme for regulating the flow of power through rectifier ensures reduced reactive power burden on the self excitation capacitor bank. The induction generator wind turbine and the AC- DC converters are modeled using MAT LAB. 

By S. Kannadhasan | M. Saravanapandi | C. Gurunathan"Simulation and Analysis of Variable Speed Wind Turbine Coupled With Self-Excited Induction Generator" 

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11387.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/11387/simulation-and-analysis-of-variable-speed-wind-turbine-coupled-with-self-excited-induction-generator/s-kannadhasan

peer reviewed journal, manuscript submission, call for paper engineering