Hybrid Biomass-Solar Power System with Establishment of Raw Material Procure

The utilization of sustainable power sources is ending up exceptionally essential because of the restricted stores of non-renewable energy sources and worldwide ecological worries for the creation of electrical power age and usage. In remote regions, towns, it is anything but difficult to get more sum biomass. Subsequently by the utilization of crossover frameworks comprising of Biomass and PV for creation of electrical vitality in these remote regions can be more temperate. 

On the off chance that the advancement of a PC based approach for assessing, the general execution of independent half and half PV-Biomass creating frameworks are broke down ,at that point these outcomes are helpful for creating and introducing cross breed frameworks in remote regions This paper centers the practical thought of independent crossover frameworks having PV and Biomass for electrical generation in remote zones. Additionally in this paper a reproduction approach has been recommended for planning remain solitary network for remote regions. 

The normal sun powered radiation and amount of biomass required information are to anticipate the general execution of the creating framework. The batteries can likewise be utilized as a part of this framework to store the additional vitality which can additionally be utilized for reinforcement. Likewise the additional power is utilized to supply to the network. Here the reproduction is completed utilizing HOMER programming. The outcomes and investigation can used to enhance the improvement of the proposed demonstrate. 

By Vikash Pooniya | Mr. Pravin Kumar | Dr. Deepika Chauhan | Md. Asif Iqbal"Hybrid Biomass-Solar Power System with Establishment of Raw Material Procure"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11105.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electrical-engineering/11105/hybrid-biomass-solar-power-system-with-establishment-of-raw-material-procure/vikash-pooniya

international peer reviewed journal, paper publication for engineering, conference issue publication

Data Prevention from Network Hacking

We are sending data from source node to destination using wireless sensor networks (WSNs), In wireless sensor networks, it is a typical threat to source privacy that an attacker performs back tracing strategy to locate source nodes by analyzing transmission paths. So there is lot of chances to lose data and information theft by network hackers. Network hackers performs eves dropping, sniffers attack, Denial of service attack. These types of attacks are achieved by negative commands generated by intermediate server maintained by hackers. 

With the popularity of the Internet of Things (IoTs) in recent years, source privacy protection has attracted a lot of attentions. However, they fail to get the tradeoff between multi-path transmission and transmission cost. In this project, we propose a Constrained Random Routing (CRR) mechanism and Greedy techniques, which can constantly change routing next-hop instead of a relative fixed route so that attackers cannot analyze routing and trace back to source nodes. 

At first we designed the randomized architecture for each sensor nodes. Then calculate the coordinates and weights of node, Finally, the selected weights help to decide which node will become the next hop. In this way, attackers would be confused by the constantly changing paths. The simulation results prove that our proposal can achieve high routing efficiency in multi-path transmission. 

By A Prasanth | P Sankar Ganesh | S P Raja Gopalan"Data Prevention from Network Hacking"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11035.pdf 

Direct URL: http://www.ijtsrd.com/engineering/computer-engineering/11035/data-prevention-from-network-hacking/a-prasanth

high impact factor, ugc approved journals for engineering, special issue publication

Palm Karnel Shell Ash as a Partial Replacement for Cement in the Production of Paving Blocks

Palm kernel shell is known for its similar mineral element with cement and little binding ability in ash form. This research presents a report on the study of the material properties of paving block by inclusion of Palm Kernel Shell Ash (PKSA) as partial replacement for cement, to know the optimum replacement without falling below minimum breaking strength to which Paving blocks can still be produced. In achieving this, a mix of 1:1.5:3 with a 0.5 w/c was used throughout the production with PKSA replacing cement for 0%, 5%, 10%, 15%, 20%, and 25% for 7 days, 14 days, 21 days, and 28 days considered in the test for compressive, and tensile strength and 7 days, 21 days, and 28 days for flexural strength for all percentages. 

The findings revealed that 10% cement replacement yielded an optimum strength increase of 6%, 9%, 6% and 5% for compressive strength; 5%, 8%, 13% and 3% for split tensile strength for the curing days respectively. In addition, 4% increase in flexural strength for 7 days curing with no significant increase for 21 and 28 days curing. On the overall, the research revealed that PKSA inclusion as partial replacement for cement as binder in paving block making resulted in cost reduction of about 3.3% savings 

By Ottos, C. G. | Isaac, O. E."Palm Karnel Shell Ash as a Partial Replacement for Cement in the Production of Paving Blocks"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11194.pdf 

Direct URL: http://www.ijtsrd.com/engineering/chemical-engineering/11194/palm-karnel-shell-ash-as-a-partial-replacement-for-cement-in-the-production-of-paving-blocks/ottos-c-g

manuscript publication, submit paper online, indexed journal

Advance Safe Locker Security System using Dactylogram

In this paper focuses on affording a secured attestation and user-friendly mechanism to operate the closet. In spite of the availability of digital lockers hacking the lock code by an illegitimate person has become a plain-sailing task. Existing system electronic locks are available in the market based on password, RFID, wireless and IoT. Our proposed system, primary aim is towards to resolve the problems occurred in the safe locker security. We introduced more advanced and secure locker on multilevel attestation using Dactylogram, Passcode and OTP. (dactylogram used for human biometric more secure attestation then other attestation) 

By S. Prabhakaran | P. Sridhar | R. Alexander"Advance Safe Locker Security System using Dactylogram"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11045.pdf 

Direct URL: http://www.ijtsrd.com/engineering/computer-engineering/11045/advance-safe-locker-security-system-using-dactylogram/s-prabhakaran

best journal, manuscript submission, call for paper engineering

Protection of Medical Data Sharing and Intrusion Avoidance Based on Cloudlet

Generally medical data is commonly known as health information of patients, organize and track medical records for healthcare facilities. It can be analyzed for service quality and insurance reimbursement purpose. Cloud assisted healthcare big data computing becomes critical to meet user's ever growing demands on health consultation. The body data collected by device is transmits to the mobile. The mobile collects the information in an array. The information contains user's sensitive information, so it converts to cipher text format. 

The patients suffer from similar kinds of symptoms; they can able to exchange their information and suggest hospital in personal chat application. A similar disease patient connected to common group, they exchange their information. Patient information's are divided into two types and stored in cloud. The two types are EID and MI. EID is the property which can identify the user apparently. MI contains medical information such as disease type and medicine. The two information stored in two independent tables. EID stored in cipher text format and MI stored in plaintext format. 

By M. Babu | V. Priyadharshini | R. Punitha | V. Reena"Protection of Medical Data Sharing and Intrusion Avoidance Based on Cloudlet"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11086.pdf 

Direct URL: http://www.ijtsrd.com/engineering/computer-engineering/11086/protection-of-medical-data-sharing-and-intrusion-avoidance-based-on-cloudlet/m-babu

research papers, paper publication for engineering, conference issue publication

Experimental Investigation on Surface Roughness and Vibration Parameters in Turning of EN8K steel using PTFE / Nylon66 Liners for Carbide Insert Cutting Tools

Reliable vibration reduction method is one of the important aspects for achieving a good dimensional accuracy and surface finish during turning operation in a manufacturing system. An effort is being made to minimize vibration in order to improvise surface finish and dimensional tolerance in lathe dry turning process by passive damping technique. In the present work, prediction is made to improve surface finish by reducing the vibration of cutting tool in Lathe using viscoelastic material PTFE and Polyamide 66 or Nylon 66 liners fitted at the base of tool holder. 

The objective of this project work is to investigate on Surface Roughness in Turning of EN8K steel using PTFE / Nylon66 Liners for Carbide Insert Cutting Tools determine the optimal setting of cutting parameters (speed(N) rpm, depth of cut(d) mm , feed(f)mm/rev ) of the tool to have a reduced tool vibration (in terms of peak acceleration) and surface roughness(Ra). In this work the experiment has been carried out in lathe dry turning (without using cutting fluid) of a commercially available EN8K Steel as a work material and carbide insert tool. 

The ranges of process cutting parameters are speed (750,500,350,275 rpm), federate (0.2,018,0.16,0.14 mm/rev), depth of cut (1.5,1.2,0.9,0.6mm). For this experiment Taguchi design of experiment was carried out for PTFE and Nylon liner to collect the data for surface roughness and tool vibration by employing Taguchiorthogonal array to conduct experiments in an organized manner. Analysis of variance (ANOVA) with Minitab 17 software is performed to optimize the parameters on turning operation. The result indicates that Surface finish is observed to improve with application of Nylon liner. 

By Mr. Taware S. B | Prof. Mundhe V. L | Dr. Narve N. G"Experimental Investigation on Surface Roughness and Vibration Parameters in Turning of EN8K steel using PTFE / Nylon66 Liners for Carbide Insert Cutting Tools"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11080.pdf 

Direct URL: http://www.ijtsrd.com/engineering/mechanical-engineering/11080/experimental-investigation-on-surface-roughness-and-vibration-parameters-in-turning-of-en8k-steel-using-ptfe--nylon66-liners-for-carbide-insert-cutting-tools/mr-taware-s-b

review papers, ugc approved journals for engineering, special issue publication

Classification on Missing Data for Multiple Imputations

This research paper explores a variety of strategies for performing classification with missing feature values. The classification setting is particularly affected by the presence of missing feature values since most discriminative learning approaches including logistic regression, support vector machines, and neural networks have no natural ability to deal with missing input features. Our main interest is in classification methods that can both learn from data cases with missing features, and make predictions for data cases with missing features. 

By A. Nithya Rani | Dr. Antony Selvdoss Davamani"Classification on Missing Data for Multiple Imputations"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd9566.pdf 

Direct URL: http://www.ijtsrd.com/engineering/computer-engineering/9566/classification-on-missing-data-for-multiple-imputations/a-nithya-rani

research papers, paper publication for engineering, conference issue publication