Design and Analysis of Ceiling Cable Holder Base

Injection moulds are classified into two types based on runner design i.e. Cold runner moulds and Runner less moulds i.e. hot runner moulds. In cold runner moulds, for multi cavity and multi point injection moulds, there is wreckage of material in runner area. Also wastage of material is more than component weight. To overcome the above problem, the technique used is hot Runner moulds. Hot runner mould is one of the improved manufacturing techniques for multi cavity type moulds. These types of moulds are commonly used for large production rate. While producing plastic components using normal standard multi cavity mould, we are facing the problems like partial filling, cavities in components, less product quality, injection pressure and temperature reduction and war page etc. Thus we are redesigning the holder base by doing some modification in and this will be beneficial for our using purpose. We are making design of the component, mould flow analysis using software Solid works.

BY  Nitish Kumar Mishra | Prof. Vaibhav Bankar "Design and Analysis of Ceiling Cable Holder Base"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23840.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23840/design-and-analysis-of-ceiling-cable-holder-base/nitish-kumar-mishra

ugc approved journal, list of ugc approved journals, ugc approved journals for engineering

Hybrid Cycle with the Combination of Flywheel and Gear System

The mean of my hybrid cycle is that the flywheel connected with the back wheel with the help of chain mechanism and also the gear system connected with it. The main function of flywheel is to store the waste energy which arises due to break. Like heat energy, sound energy. And the stored energy utilized by the help of gears as we required speed during riding. 

BY Abdul Majid | Dr. Amit Km Tanwar | Mr. Pankaj Rathor "Hybrid Cycle with the Combination of Flywheel and Gear System"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd21665.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/21665/hybrid-cycle-with-the-combination-of-flywheel-and-gear-system/abdul-majid

ugc approved journals with low publication fees, ugc approved journal, list of ugc approved journals

Design and Construction of a 20 000 Mah Wind Power Bank

The study aimed to design and construct a portable wind power bank, using quantitative research method to profoundly explain the concept and define the problems that will make an improvement for the ideas in developing the project. One type of wind powered battery charging will be explored in this paper. This can be used in times of power interruptions, in the absence of electrical sources, during outdoor activities away from home where charging is a necessity, and most specially to save money by minimizing electrical consumption. It is designed to be installed fixed on home rooftops when at home but can be detachable and can be carried whenever necessary. It is an energy saving device for the reason that it may not need any external source of electricity. It consists of a wind turbine driving a generator and operates at variable speed. It consists of three different modules which are power supply module, power storage module and phone charging module. All these modules consist of different components that perform different functions. The power supply module consists of the components' physics, the principles and the design. The power storage module includes the components parameters responsible for the restoration of energy to the battery after it has been used to charge mobile phones. There is connecting port between the power bank power storage and charging module and the phone charging module through which it can be connected in order to recharge phones as well as to recharge the power bank from an AC source. This paper analyzes the property of the system components. The effect of parameter variation and the system configuration on the system performance are investigated. 

BY Ramon L. Pitao, Jr. | Sunny E. Araneta | Clifford Jan C. Dionson | Jaypee G. Gagarino | Ronald M. Famor "Design and Construction of a 20 000 Mah Wind Power Bank"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23426.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23426/design-and-construction-of-a-20-000-mah-wind-power-bank/ramon-l-pitao-jr

ugc list of journals, ugc listed journals, ugc approved journals with low publication fees

Comparative Study on Analysis and Design of Reinforced Concrete Building under Seismic Forces for Different Codal Guidelines

Construction is a vital part of every developing country in this era. Every country has specific building design codes which provide the standards to engineers for the design of various structural components like the beam, column, and slab. Analysis and design Reinforcement concrete building of every country is based on their geographical location. Seismic forces are one of the major natural forces causing huge damage to lives and economy. So that one can understand the difference and can appropriate for best guidelines for safety to lives and economy. In today's world of globalization, an engineer must be efficient enough to understand and handle different codes. In this paper, a comparative study is presented for analysis and design of reinforced concrete building under seismic forces for four codal Guidelines IS 1893 2002, Euro code 8, Japan 2007 and ASCE 7 10 using Staad Pro. The comparative study includes the comparison building base shear, bending moment, shear force, percentage of steel, required area, displacement, and story drift. For seismic Analysis and design, the building elements like beam and column is also compared using these countries RC building code. 

BY Tabish Izhar | Samreen Bano | Neha Mumtaz "Comparative Study on Analysis and Design of Reinforced Concrete Building under Seismic Forces for Different Codal Guidelines"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23819.pdf

Paper URL: https://www.ijtsrd.com/engineering/structural-engineering/23819/comparative-study-on-analysis-and-design-of-reinforced-concrete-building-under-seismic-forces-for-different-codal-guidelines/tabish-izhar

ugc listed journals, ugc approved journals with low publication fees, ugc approved journal

Study About Effects of Oblique Angle of Die Surface to the Product Quality in the Deep Drawing

Deep drawing is one of the special methods for the sheet metal forming in the pressure processing field. This method is applied to manufacture the mechanical products with the deep and complex shapes. The influences of oblique angle of die surface to the product quality of the metallic forming are diccussed. This study uses the Abaqus software to simulate for four cases of the oblique angle of the die surface in the sheet metal forming processes. With each the simulation cases, the result shows that the wall thickness, material distribution and forming pressure are different for each various products. Moreover, the simulation results support a useful data table for the research and manufacturing in the deep drawing field.

BY  Nguyen Van Quang | Pham Van Lieu "Study About Effects of Oblique Angle of Die Surface to the Product Quality in the Deep Drawing"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23860.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23860/study-about-effects-of-oblique-angle-of-die-surface-to-the-product-quality-in-the-deep-drawing/nguyen-van-quang

ugc journal list, ugc list of journals, ugc listed journals

Design and Fabrication of Automatic Speed Controller for Automobile

This project demonstrates idea of accident prevent in hill area and other danger area. In this system we use a transmitter antenna that placed on critical region and it send it particular frequency of speed in certain region. If any vehicle receive this frequency of speed and speed of vehicle automatically set on particular speed of that place. This is very efficient and power full idea. This idea comes in my mind for saving of Fuel energy and provide perfect controlling of vehicle driver. This system provides automatic speed control in hazard region. In this project we demonstrate the idea of advance accident avoiding vehicle system. In this project we make a vehicle that control by advance technology. And we interface the RF with the help of encoder and decoder IC that sense hazard field and distance. According to distance it take an appropriate decision and according to condition it automatically control the speed of vehicle and it sense the critical condition of distance and it stop. My idea is very special idea for accident prevention because it sense the condition of obstacle and it weep the buzzer and intimation. 

BY Dr. Pikesh Bansal | Abhinav Srivastava | Aadil Zaya | Bhuvnesh Sharma | Anuj Upadhyay "Design and Fabrication of Automatic Speed Controller for Automobile"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23846.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23846/design-and-fabrication-of-automatic-speed-controller-for-automobile/dr-pikesh-bansal

ugc approved journals, ugc journal list, ugc list of journals

CFD Simulation of Air Conditioning System of the Classroom

We have focused on the design and modifications of air cooling duct system using Computational Fluid Dynamics CFD considering all air flow patterns affecting the system efficiency. Necessary tools and methods are applied for efficient designing. The different load conditions and the layout of the duct system need to be very accurate because if any deviation will result to problems like uneven cooling, frictional losses, increased noise and vibrations and also more power consumption. The above problems highlight the importance for optimizing the duct design to obtain desired flow conditions. Our work involves use of theoretical and software tools to get a detailed comparative analysis of the costs and benefits involved in selecting a particular shape rectangular or circular for the duct according to the working conditions. The focus of this paper rests on using psychrometry chart to calculate the cooling load and other parameters.

BY Gaurav Srivastava | Aman Kumar | Dipti Chandel | Harsh Dabas | Ashish Mishra | Saurabh "CFD Simulation of Air Conditioning System of the Classroom"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23824.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23824/cfd-simulation-of-air-conditioning-system-of-the-classroom/gaurav-srivastava

call for paper in ugc approved journals, ugc approved journals, ugc journal list