Self Rechargeable Paper Thin Film Batteries

This paper covers the use of cellulose paper simultaneously as electrolyte, separation of terminals, and physical help of a battery controlled battery. The testimony on the two substances of a paper sheet of metal or metal oxides dainty layers with different electrochemical potential outcomes, independently as anode and cathode, such as Cu and Al, lead to a yield voltage of 0.70 V and a stream thickness that varies between 150 n A cm and 0.5 m A cm, subject to the paper structure, thickness and the dimension of OH species adsorbed in the paper matrix. The electrical yield of the paper battery is self governing of the terminals thickness yet strongly depends on the climatic relative stickiness RH , with a stream thickness redesign by various solicitations of significance when RH changes from 60 to 85 . Other than versatility, negligible exertion, low material use, regular very much arranged, the power yield of paper batteries can be changed in accordance with the perfect voltage– current required, by genuine mix. A 3 V demonstrate was made to control the ON OFF state of a paper.

By Vaibhav Singh | Gaurav Saxena "Self-Rechargeable Paper Thin-Film Batteries"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd22872.pdf

Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/22872/self-rechargeable-paper-thin-film-batteries/vaibhav-singh

multidisciplinary journal, peer reviewed journals, international peer reviewed journal

Design of an Air Distribution System for a Multi Storey Office Building

Earlier the use of air conditioning for comfort purpose was considered to be expensive, but now a day, it has been a necessity for all human beings. Window air conditioners, split air conditioners are used in small buildings, offices etc. But, when the cooling load required is very high such as big buildings, multiplex, multi story buildings, hospitals etc. centralized unit central air conditioners used. The central AC's systems are installed away from building called central plant where water or air is to be cooled. This cooled air not directly supplied to the building rooms. When the cooled air cannot be supplied directly from the air conditioning equipment to the space to be cooled, then the ducts are provided. The duct systems carry the cooled air from the air conditioning equipment for the proper distribution to rooms and also carry the return air from the room back to the air conditioning equipment for recirculation. When ducts are not properly designed, then it will lead to problem such as frictional loss, higher installation cost, increased noise and power consumption, uneven cooling in the cooling space. For minimizing this problem, a proper design of duct is needed. Equal friction method is used to design the duct, which is simple method as compared with the other design methods. These work gives the combination of theoretical and software tool to provide a comparative analysis of the duct size. It also gives the comparison between rectangular duct and circular duct.

By M. Pruthvi Raj | K. Prashanth Reddy | Mussan Shankar Reddy | B. Kranthi Kumar "Design of an Air Distribution System for a Multi Storey Office Building"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23319.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23319/design-of-an-air-distribution-system-for-a-multi-storey-office-building/m-pruthvi-raj

special issue publication, multidisciplinary journal, peer reviewed journals

Moving Grocery Store using A.I Powered Robots

Robot made many impact on many different sectors. Nowadays Robots are powered with A.I and Machine Learning to make it more powerful and to meet specific requirement of customers. On January 2018 we started a research on robotics and a.i which can make a impact on E commerce sector. Our objective behind this project is to replace human effort in transporting order placed by customer through e commerce platform. And finally we made a breakthrough. on November 2018 we exhibited our project titled as Junky Box Robot The Moving Grocery Store. Our robot is able to deliver orders placed by customer using the technologies like Computer Vison , Machine Learning , Artificial Intelligence, Deep learning, Sensor Fusion etc. We tested this robot in a selected locality and passed all obstruction and all security measures. 

BY Nirmal Ram | Mohamed Fasin A F | Annrija Paul | Anila Thomas "Moving Grocery Store using A.I Powered Robots"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23328.pdf

Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/23328/moving-grocery-store-using-ai-powered-robots/nirmal-ram

call for paper international journal, call for paper, call for paper engineering

Analysis of Air Conditioning System used in Automobile

Air conditioning has great importance in many areas of life. Especially it is crucial in transportation sector. Many people spend long time in an automotive cabin during business, travel, shopping, etc., every day. The aim of this study is to analyze the performance of a bus shell by considering identifying practical solutions in order to reduce the impact of air conditioning on bus, consumption and, therefore, on air pollution. The analysis is carried considering several parameters, including passenger capacity, local climatic conditions, fuel consumptions, and latitude and longitude of starting destination of the places. For the analysis, a bus with passenger capacity of 60 people is selected and then it's heat load capacity will be determined by considering different conditions like seasons and various loads. The influence of the refrigerant decrease and the change of the air temperature which gets to exchangers on the refrigeration efficiency of the system to be analyzed. Also, its effectiveness and the power required to drive the compressor will be analyzed. The entire model, its analysis and results are discussed in the below work. 

BY Dr. S. Sreenatha Reddy | P. Akhil | N. Raju | K. Vishnu | N. Ashok "Analysis of Air Conditioning System used in Automobile"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23357.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23357/analysis-of-air-conditioning-system-used-in-automobile/dr-s-sreenatha-reddy

peer reviewed international journal, best international journal, call for paper international journal

Review on Bio Mimitic Robotic Bird

The present world has reached to a stage where most of the sophisticated and sensitive tasks are mostly done by artificial hands. This paper discuss about the details of artificial birds are also called as ornithopters which belongs to Micro Arial vehicle MAV category. Bio mimicking robots have been replaced the place of human with their uncompromised accuracy and efficiencies. However the real challenges in developing MAVs is still unsolved and not interpreted as it flies in the transient and low Reynolds number flow. This paper investigated the aerodynamic factors of fly's which influence their flight, different kinematic mechanisms which drives the vehicle and different types of designs for wings and their performance. In line with this, both past and future of this innovative area were discussed. One other hand selection of material is also plays vital role in case of MAVs weight consideration . So, this paper explain the different material which suited for this kind of flying machine. 

BY Mr. Sreedhar | B. Pavan | D. V. Anirudh | G. Shiva Krishna "Review on Bio-Mimitic Robotic Bird"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23346.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23346/review-on-bio-mimitic-robotic-bird/mr-sreedhar

review papers, submit paper online, manuscript submission

Heat Load Calculations and Duct Design for Commercial Building G 2

The modern commercial or office building consists of the HVAC system which is Heating, Ventilation, Air conditioned. In this report, we'll going to identify the purpose and goals of HVAC system, describe HVAC types, describe HVAC parts and describe how this part works together or its working cycle. outsides to air conditioning there are ventilation systems like ceiling fan, fresh air supply and exhaust fan where ceiling fan is used is used to ventilate the air with rotating blades and exhaust fan is used to displace the inside air to the outside environment, fresh air supply is used to displace the inside air to the outside environment by supplying fresh air from the outside air. And also the design of duct by using the heat load calculations based on that how much amount of air to be carried out to gain the required cooling inside the area is determined and also creating the comfortable zone for the humans. 

by R. Sateesh Kumar | J. Deepak | O. Srinivas | T. Prashanth "Heat Load Calculations and Duct Design for Commercial Building G+2"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23309.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23309/heat-load-calculations-and-duct-design-for-commercial-building-g2/r-sateesh-kumar

research papers, review papers, submit paper online

Modelling and Analysis of Go Kart Chassis

The best way to evaluate a functioning go kart would be testing its performance under various conditions and points. Therefore, a new go kart called Mech Tech initial was presented in this report. Mech Tech initial was constructed based on the common go kart size found in the market but with slight difference in the frame design. Mech Tech initial's chassis was built using steel pipes, bent and welded together, with consideration to the position, braking system, steering system, seat position and many more. Other go kart's components such as engine, seat, steering wheel, brake system, bumper and wheels are mounted to chassis to test the performance. The chassis dimensions were taken for further testing and future reference. Among the tests applied are weight distribution on each wheel, and 17 degree method. 

by Srinivasa Reddy | N. Sharathchandra | Mustafa | P. Jayanth "Modelling and Analysis of Go-Kart Chassis"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019,

URL: https://www.ijtsrd.com/papers/ijtsrd23268.pdf

Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23268/modelling-and-analysis-of-go-kart-chassis/srinivasa-reddy

paper publication for engineering, paper publication in science, paper publication in management